[Thu Feb 23 13:04:51 2012] Detection parameters:
  Position = (863.6, 426.3) = 0 25 29.17 64 11 25.3
  Extent = 0.7" x 0.7", rotation angle = 14 degrees
  Source counts = 1142.0 +/- 68.7
  Background counts = 3572.0
  Rate = 0.01 +/- 0.0006

[Thu Feb 23 13:05:51 2012] Off-axis axis estimate = 3.01'
[Thu Feb 23 17:57:35 2012] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 17:57:35 2012] Initial guess for spatial extent in simple fitting = 0.58"
[Thu Feb 23 17:57:35 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.795
[Thu Feb 23 17:57:35 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 0.58"
[Thu Feb 23 19:33:13 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27.ximg exists
[Thu Feb 23 19:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27.csv
[Thu Feb 23 19:33:13 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27_1.ximg exists
[Thu Feb 23 19:33:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27.csv
[Thu Feb 23 19:33:13 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07639_pi14-548_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 19:33:14 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass0_tfrozen_src27.ximg exists
[Thu Feb 23 19:33:14 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass0_tfrozen_src27_1.ximg exists
[Thu Feb 23 19:33:14 2012] Fit fullrun_ccd2_acisf07639_pi14-548_cl_pass0_tfrozen_src27 appears to have run properly
[Thu Feb 23 21:07:33 2012] Spatial fit model total counts = 5705.990000, observed total counts = 5706.000000
[Thu Feb 23 21:07:33 2012] Offset between fit and detection position for source 133 = 1.733940 pixels
[Thu Feb 23 21:07:33 2012] 5675.405000 total counts/ 5112.390000 bgd. counts: snr = 7.874228
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 1.733940 pixels
  Position = (865.3, 425.9) = 0 25 29.08 64 11 24.9
  Extent = 1.5 (1.5-1.5)", rotation angle = 0
  Source counts = 563.0 +/- 75.3
  Background counts = 5112.4
  Rate = 0.005 +/- 0.0007
[Thu Feb 23 21:07:34 2012] Vigneting correction estimate = 1.000000
[Thu Feb 23 21:07:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Feb 23 21:07:34 2012] Assessing source extent using major axis lower bound
[Thu Feb 23 21:07:34 2012] Source does appear to be extended
[Thu Feb 23 21:07:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 02:03:07 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 02:03:07 2012] Initial guess for spatial extent in simple fitting = 1.48"
[Fri Feb 24 02:03:07 2012] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Fri Feb 24 02:03:07 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 1.48"
[Fri Feb 24 03:59:29 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27.ximg exists
[Fri Feb 24 03:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27.csv
[Fri Feb 24 03:59:29 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27_1.ximg exists
[Fri Feb 24 03:59:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27.csv
[Fri Feb 24 03:59:29 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07639_pi14-548_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 03:59:29 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass1_tfrozen_src27.ximg exists
[Fri Feb 24 03:59:29 2012] fullrun_ccd2_acisf07639_pi14-548_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Feb 24 03:59:29 2012] Fit fullrun_ccd2_acisf07639_pi14-548_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Feb 24 06:27:06 2012] Warning, spatial fit 27 centroid is now closest to src. 497
[Fri Feb 24 06:27:06 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 06:27:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 06:27:06 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 06:27:06 2012] Source does appear to be extended
[Fri Feb 24 06:27:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 10:15:00 2012] Writing source region out to fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133_src.reg
[Fri Feb 24 10:15:00 2012] Extracting stamp from image fullrun_ccd2_acisf07639_pi14-548_cl_sm2.00.img.gz, (798, 358) - (933, 494)
[Fri Feb 24 10:15:00 2012] Writing fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133.gif
[Fri Feb 24 10:37:07 2012] Size of ../../acisf07639/products/events/fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133_src.evt.gz[events] = 9495 counts
[Fri Feb 24 10:37:07 2012] Mean chipx,y = (336.96, 794.75)
[Fri Feb 24 10:37:07 2012] Mean tdetx,y = (3855.75, 3749.04)
[Fri Feb 24 10:37:07 2012] chipx,y range = (308.00-366.00, 765.00-824.00)
[Fri Feb 24 10:37:07 2012] Size of ../../acisf07639/products/events/fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133_bgd.evt.gz[events] = 7356 counts
[Fri Feb 24 10:37:10 2012] rmf not found, will run specextract
[Fri Feb 24 10:37:10 2012] arf not found, will run specextract
[Fri Feb 24 10:37:39 2012] ../../acisf07639/products/spectra/fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133.warf not found
[Fri Feb 24 10:37:39 2012] ../../acisf07639/products/spectra/fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133.wrmf not found
[Fri Feb 24 10:37:39 2012] Removal of ../../acisf07639/products/spectra/fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133.soff failed
[Fri Feb 24 13:26:52 2012] Keeping rmf generated by specextract
[Fri Feb 24 13:26:52 2012] 192.631
[Fri Feb 24 18:30:08 2012] Updating aperture counts using extracted products
[Fri Feb 24 18:30:08 2012] Error reading totcts from fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133_src.pi.gz
[Fri Feb 24 18:30:23 2012] Calculating source flux in energy range 0.30-8.00
[Fri Feb 24 18:30:23 2012] Using photon index=1.80, rate=0.00517, arf fullrun_ccd2_acisf07639_pi14-548_pass1_cl_src133.arf
[Fri Feb 24 18:30:23 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Feb 24 18:30:23 2012] Updating source flux to 7.4e-14