[Fri Oct 28 01:20:25 2011] Detection parameters:
  Position = (585.8, 289.5) = 11 27 50.71 56 47 19.7
  Extent = 2.5" x 1.3", rotation angle = 28 degrees
  Source counts = 106.8 +/- 11.5
  Background counts = 25.2
  Rate = 0.002 +/- 0.0002

[Fri Oct 28 01:20:27 2011] Off-axis axis estimate = 6.28'
[Fri Oct 28 01:21:43 2011] Using EEF radius (= 1.77 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:21:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:21:43 2011] Initial guess for spatial extent in simple fitting = 1.77"
[Fri Oct 28 01:21:43 2011] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.068
[Fri Oct 28 01:21:43 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.77"
[Fri Oct 28 01:21:44 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 28 01:21:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10.csv
[Fri Oct 28 01:21:44 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 28 01:21:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10.csv
[Fri Oct 28 01:21:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:21:45 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 28 01:21:45 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 28 01:21:45 2011] Fit fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 28 01:22:00 2011] Spatial fit model total counts = 116.998000, observed total counts = 117.000000
[Fri Oct 28 01:22:00 2011] Offset between fit and detection position for source 9 = 0.779441 pixels
[Fri Oct 28 01:22:00 2011] 116.689400 total counts/ 25.542000 bgd. counts: snr = 18.035029
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.779441 pixels
  Position = (586.2, 290.1) = 11 27 50.72 56 47 19.8
  Extent = 1.8 (1.3-2.3)", rotation angle = 0
  Source counts = 91.1 +/- 10.8
  Background counts = 25.5
  Rate = 0.002 +/- 0.0002
[Fri Oct 28 01:22:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:22:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:22:00 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:22:00 2011] Source does appear to be extended
[Fri Oct 28 01:22:00 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:22:20 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:22:20 2011] Initial guess for spatial extent in simple fitting = 1.78"
[Fri Oct 28 01:22:20 2011] source mask rpix=3.6, npix_max = 67, mask sum = 64, frac = 0.944
[Fri Oct 28 01:22:20 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 1.78"
[Fri Oct 28 01:22:21 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 28 01:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 01:22:21 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 28 01:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 01:22:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:22:22 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 28 01:22:22 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 28 01:22:22 2011] Fit fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 28 01:22:35 2011] Spatial fit model total counts = 118.443000, observed total counts = 117.000000
[Fri Oct 28 01:22:35 2011] Offset between fit and detection position for source 9 = 0.268380 pixels
[Fri Oct 28 01:22:35 2011] 117.851000 total counts/ 31.489800 bgd. counts: snr = 15.389826
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.268380 pixels
  Position = (586.0, 290.3) = 11 27 50.73 56 47 19.9
  Extent = 1.7 (1.2-2.2)", rotation angle = 0
  Source counts = 86.4 +/- 10.9
  Background counts = 31.5
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 01:22:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:22:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:22:35 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:22:35 2011] Source does appear to be extended
[Fri Oct 28 01:22:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:24:28 2011] Not overwriting source region fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.reg
[Fri Oct 28 01:24:28 2011] Extracting stamp from image fullrun_ccd7_acisf07607_pi14-548_cl_sm2.00.img.gz, (509, 213) - (664, 368)
[Fri Oct 28 01:24:28 2011] Writing fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9.gif
[Fri Oct 28 01:24:55 2011] ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.evt and ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Fri Oct 28 01:24:55 2011] Size of ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.evt.gz[events] = 125 counts
[Fri Oct 28 01:24:55 2011] Mean chipx,y = (944.29, 357.09)
[Fri Oct 28 01:24:55 2011] Mean tdetx,y = (4861.29, 2059.09)
[Fri Oct 28 01:24:55 2011] chipx,y range = (916.00-967.00, 333.00-382.00)
[Fri Oct 28 01:24:55 2011] Size of ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 284 counts
[Fri Oct 28 01:24:55 2011] ../../acisf07607/products/images/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.img and ../../acisf07607/products/images/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Fri Oct 28 01:24:55 2011] ../../acisf07607/products/spectra/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.pi and ../../acisf07607/products/spectra/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Fri Oct 28 01:24:55 2011] Not generating rmf since there are only 86 counts
[Fri Oct 28 01:24:57 2011] ../../acisf07607/products/lightcurves/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.lc and ../../acisf07607/products/lightcurves/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Fri Oct 28 01:26:17 2011] 203.798
[Fri Oct 28 01:26:21 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:26:21 2011] Error reading totcts from fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9_src.pi.gz
[Fri Oct 28 01:26:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:26:22 2011] Using photon index=1.80, rate=0.00146, arf fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src9.arf
[Fri Oct 28 01:26:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:26:22 2011] Updating source flux to 1.2e-14
[Fri Oct 28 01:26:56 2011] Source 9 has fewer than 100.000000 counts, skipping spectral fitting