[Fri Oct 28 01:20:25 2011] Detection parameters:
  Position = (762.5, 644.9) = 11 27 40.14 56 50 14.6
  Extent = 0.6" x 0.5", rotation angle = 2 degrees
  Source counts = 2342.3 +/- 48.6
  Background counts = 19.7
  Rate = 0.04 +/- 0.0008

[Fri Oct 28 01:20:27 2011] Off-axis axis estimate = 3.02'
[Fri Oct 28 01:21:43 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:21:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:21:43 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 28 01:21:43 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.052
[Fri Oct 28 01:21:43 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.58"
[Fri Oct 28 01:21:44 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 28 01:21:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 01:21:44 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 28 01:21:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1.csv
[Fri Oct 28 01:21:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07607_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:21:44 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 28 01:21:45 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 28 01:21:45 2011] Fit fullrun_ccd7_acisf07607_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 28 01:22:00 2011] Source 10 is offset by 5.279291 and 3.647211 pixels which is larger than
2 X fitted extent = 0.594484 x 0.594484, not incorporating fit results
[Fri Oct 28 01:22:00 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:22:00 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:22:00 2011] Assessing source extent using major
[Fri Oct 28 01:22:00 2011] Source does appear to be extended
[Fri Oct 28 01:22:00 2011] Computing asymmetry using major and minor axis, asym = 1.19
[Fri Oct 28 01:22:20 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 01:22:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 28 01:22:20 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct 28 01:22:20 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.052
[Fri Oct 28 01:22:20 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.58"
[Fri Oct 28 01:22:21 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 28 01:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 01:22:21 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 28 01:22:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1.csv
[Fri Oct 28 01:22:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07607_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 01:22:22 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 28 01:22:22 2011] fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 28 01:22:22 2011] Fit fullrun_ccd7_acisf07607_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 28 01:22:35 2011] Spatial fit model total counts = 2360.000000, observed total counts = 2360.000000
[Fri Oct 28 01:22:35 2011] Offset between fit and detection position for source 10 = 0.717688 pixels
[Fri Oct 28 01:22:35 2011] 2357.738400 total counts/ 71.908400 bgd. counts: snr = 269.559173
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.717688 pixels
  Position = (763.0, 645.4) = 11 27 40.14 56 50 14.6
  Extent = 0.7 (0.6-0.7)", rotation angle = 0
  Source counts = 2285.8 +/- 48.6
  Background counts = 71.9
  Rate = 0.04 +/- 0.0008
[Fri Oct 28 01:22:35 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 01:22:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 01:22:35 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 01:22:35 2011] Source does appear to be extended
[Fri Oct 28 01:22:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 01:24:28 2011] Not overwriting source region fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.reg
[Fri Oct 28 01:24:28 2011] Extracting stamp from image fullrun_ccd7_acisf07607_pi14-548_cl_sm2.00.img.gz, (733, 616) - (793, 675)
[Fri Oct 28 01:24:28 2011] Writing fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10.gif
[Fri Oct 28 01:24:30 2011] ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.evt and ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Fri Oct 28 01:24:30 2011] Size of ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.evt.gz[events] = 2319 counts
[Fri Oct 28 01:24:30 2011] Mean chipx,y = (553.34, 435.83)
[Fri Oct 28 01:24:30 2011] Mean tdetx,y = (4470.34, 2137.83)
[Fri Oct 28 01:24:30 2011] chipx,y range = (534.00-572.00, 417.00-457.00)
[Fri Oct 28 01:24:30 2011] Size of ../../acisf07607/products/events/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 74 counts
[Fri Oct 28 01:24:30 2011] ../../acisf07607/products/images/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.img and ../../acisf07607/products/images/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Fri Oct 28 01:24:30 2011] ../../acisf07607/products/spectra/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.pi and ../../acisf07607/products/spectra/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Fri Oct 28 01:24:33 2011] ../../acisf07607/products/lightcurves/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.lc and ../../acisf07607/products/lightcurves/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Fri Oct 28 01:26:17 2011] Keeping rmf generated by specextract
[Fri Oct 28 01:26:17 2011] 224.203
[Fri Oct 28 01:26:21 2011] Updating aperture counts using extracted products
[Fri Oct 28 01:26:21 2011] Error reading totcts from fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_src.pi.gz
[Fri Oct 28 01:26:22 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:26:22 2011] Using photon index=1.80, rate=0.0386, arf fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10.arf
[Fri Oct 28 01:26:22 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:26:22 2011] Updating source flux to 2.9e-13
[Fri Oct 28 01:26:56 2011] Flag b found in src. 10 procflags, skipping spectral fitting
[Fri Oct 28 01:27:28 2011] Reading fit data from acisf07607/analysis//spectral/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_pl.csv
[Fri Oct 28 01:27:28 2011] Spectral fit parameter nH value = 4.50614e+20
[Fri Oct 28 01:27:28 2011] Spectral fit parameter PhoIndex value = 1.58754
[Fri Oct 28 01:27:28 2011] Failed to get F(0.3-8.0) from acisf07607/analysis//spectral/fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10_pl.csv, possibly due to different flux energy range selected
[Fri Oct 28 01:27:28 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 01:27:28 2011] Using Nh = 4.5e+20, photon index=1.59, rate=0.0386, arf fullrun_ccd7_acisf07607_pi14-548_pass1_cl_src10.arf
[Fri Oct 28 01:27:28 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 01:27:28 2011] Updating source flux to 3.2e-13