[Thu Oct  6 11:37:13 2011] Detection parameters:
  Position = (1216.9, 527.1) = 16 40 59.18 -46 33 40.1
  Extent = 0.7" x 0.5", rotation angle = 15 degrees
  Source counts = 22.9 +/- 4.9
  Background counts = 1.1
  Rate = 0.0008 +/- 0.0002

[Thu Oct  6 11:37:13 2011] Off-axis axis estimate = 3.48'
[Thu Oct  6 11:38:10 2011] Using EEF radius (= 0.69 ")to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:38:10 2011] Initial guess for spatial extent in simple fitting = 0.69"
[Thu Oct  6 11:38:10 2011] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.112
[Thu Oct  6 11:38:10 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 0.69"
[Thu Oct  6 11:38:12 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11.ximg exists
[Thu Oct  6 11:38:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11.csv
[Thu Oct  6 11:38:12 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11_1.ximg exists
[Thu Oct  6 11:38:12 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11.csv
[Thu Oct  6 11:38:12 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07591_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:38:13 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Thu Oct  6 11:38:13 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Oct  6 11:38:13 2011] Fit fullrun_ccd0_acisf07591_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Thu Oct  6 11:38:21 2011] Spatial fit model total counts = 25.978000, observed total counts = 25.000000
[Thu Oct  6 11:38:21 2011] Offset between fit and detection position for source 11 = 0.689215 pixels
[Thu Oct  6 11:38:21 2011] 26.007940 total counts/ 1.073840 bgd. counts: snr = 24.061567
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.689215 pixels
  Position = (1217.4, 527.6) = 16 40 59.19 -46 33 40.0
  Extent = 0.8 (0.5-1.0)", rotation angle = 0
  Source counts = 24.9 +/- 5.1
  Background counts = 1.1
  Rate = 0.0009 +/- 0.0002
[Thu Oct  6 11:38:21 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:38:21 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:38:21 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:38:21 2011] Source does appear to be extended
[Thu Oct  6 11:38:21 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:38:58 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Oct  6 11:38:58 2011] Initial guess for spatial extent in simple fitting = 0.76"
[Thu Oct  6 11:38:58 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.956
[Thu Oct  6 11:38:58 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 0.76"
[Thu Oct  6 11:38:58 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11.ximg exists
[Thu Oct  6 11:38:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11.csv
[Thu Oct  6 11:38:58 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11_1.ximg exists
[Thu Oct  6 11:38:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11.csv
[Thu Oct  6 11:38:58 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07591_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Oct  6 11:38:59 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Thu Oct  6 11:38:59 2011] fullrun_ccd0_acisf07591_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Thu Oct  6 11:38:59 2011] Fit fullrun_ccd0_acisf07591_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Thu Oct  6 11:39:12 2011] Spatial fit model total counts = 24.339700, observed total counts = 25.000000
[Thu Oct  6 11:39:12 2011] Offset between fit and detection position for source 11 = 0.017887 pixels
[Thu Oct  6 11:39:12 2011] 24.461490 total counts/ 1.185890 bgd. counts: snr = 21.373649
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.017887 pixels
  Position = (1217.4, 527.6) = 16 40 59.19 -46 33 40.1
  Extent = 0.7 (0.6-0.9)", rotation angle = 0
  Source counts = 23.3 +/- 4.9
  Background counts = 1.2
  Rate = 0.0008 +/- 0.0002
[Thu Oct  6 11:39:12 2011] Vigneting correction estimate = 1.000000
[Thu Oct  6 11:39:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Oct  6 11:39:12 2011] Assessing source extent using major axis lower bound
[Thu Oct  6 11:39:12 2011] Source does appear to be extended
[Thu Oct  6 11:39:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Oct  6 11:39:39 2011] Not overwriting source region fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.reg
[Thu Oct  6 11:39:39 2011] Extracting stamp from image fullrun_ccd0_acisf07591_pi14-548_cl_sm2.00.img.gz, (1184, 494) - (1251, 561)
[Thu Oct  6 11:39:39 2011] Writing fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11.gif
[Thu Oct  6 11:40:27 2011] ../../acisf07591/products/events/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.evt and ../../acisf07591/products/events/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_bgd.evt exist, delete to re-create
[Thu Oct  6 11:40:27 2011] Size of ../../acisf07591/products/events/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.evt.gz[events] = 24 counts
[Thu Oct  6 11:40:27 2011] Mean chipx,y = (694.50, 1006.92)
[Thu Oct  6 11:40:27 2011] Mean tdetx,y = (4067.92, 4437.50)
[Thu Oct  6 11:40:27 2011] chipx,y range = (678.00-709.00, 997.00-1021.00)
[Thu Oct  6 11:40:28 2011] Size of ../../acisf07591/products/events/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_bgd.evt.gz[events] = 10 counts
[Thu Oct  6 11:40:28 2011] ../../acisf07591/products/images/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.img and ../../acisf07591/products/images/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_bgd.img exist, delete to re-create
[Thu Oct  6 11:40:28 2011] ../../acisf07591/products/spectra/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.pi and ../../acisf07591/products/spectra/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_bgd.pi exist, delete to re-create
[Thu Oct  6 11:40:28 2011] Not generating rmf since there are only 23 counts
[Thu Oct  6 11:40:31 2011] ../../acisf07591/products/lightcurves/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.lc and ../../acisf07591/products/lightcurves/fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_bgd.lc exist, delete to re-create
[Thu Oct  6 11:40:32 2011] 133.359
[Thu Oct  6 11:44:18 2011] Updating aperture counts using extracted products
[Thu Oct  6 11:44:18 2011] Error reading totcts from fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11_src.pi.gz
[Thu Oct  6 11:44:18 2011] Calculating source flux in energy range 0.30-8.00
[Thu Oct  6 11:44:18 2011] Using photon index=1.80, rate=0.000808, arf fullrun_ccd0_acisf07591_pi14-548_pass1_cl_src11.arf
[Thu Oct  6 11:44:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Oct  6 11:44:18 2011] Updating source flux to 2.2e-14
[Thu Oct  6 11:44:21 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting