[Sat Oct 15 06:41:06 2011] Detection parameters:
  Position = (814.5, 949.6) = 7 58 29.94 33 1 8.1
  Extent = 5.4" x 3.3", rotation angle = 116 degrees
  Source counts = 91.6 +/- 11.4
  Background counts = 39.4
  Rate = 0.003 +/- 0.0004

[Sat Oct 15 06:41:07 2011] Off-axis axis estimate = 9.42'
[Sat Oct 15 06:41:56 2011] Using EEF radius (= 3.93 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:41:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:41:56 2011] Initial guess for spatial extent in simple fitting = 3.93"
[Sat Oct 15 06:41:56 2011] source mask rpix=8.0, npix_max = 287, mask sum = 289, frac = 1.005
[Sat Oct 15 06:41:56 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.93"
[Sat Oct 15 06:41:56 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 06:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:41:56 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 06:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07570_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:41:56 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 06:41:56 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:41:56 2011] Fit fullrun_ccd6_acisf07570_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:42:04 2011] Spatial fit model total counts = 147.994000, observed total counts = 148.000000
[Sat Oct 15 06:42:04 2011] Offset between fit and detection position for source 1 = 1.765052 pixels
[Sat Oct 15 06:42:04 2011] 147.545300 total counts/ 52.644500 bgd. counts: snr = 13.079567
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.765052 pixels
  Position = (813.4, 951.0) = 7 58 30.00 33 1 8.5
  Extent = 4.8 (3.8-6.5)", rotation angle = 0
  Source counts = 94.9 +/- 12.1
  Background counts = 52.6
  Rate = 0.003 +/- 0.0004
[Sat Oct 15 06:42:04 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:42:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:42:04 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:42:04 2011] Source does appear to be extended
[Sat Oct 15 06:42:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:42:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:42:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:42:22 2011] Initial guess for spatial extent in simple fitting = 4.79"
[Sat Oct 15 06:42:22 2011] source mask rpix=9.7, npix_max = 418, mask sum = 420, frac = 1.003
[Sat Oct 15 06:42:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.79"
[Sat Oct 15 06:42:23 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 06:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:42:23 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 06:42:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:42:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07570_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:42:23 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 06:42:23 2011] fullrun_ccd6_acisf07570_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:42:23 2011] Fit fullrun_ccd6_acisf07570_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:42:30 2011] Spatial fit model total counts = 167.000000, observed total counts = 167.000000
[Sat Oct 15 06:42:30 2011] Offset between fit and detection position for source 1 = 1.015441 pixels
[Sat Oct 15 06:42:30 2011] 166.743300 total counts/ 66.192300 bgd. counts: snr = 12.358981
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.015441 pixels
  Position = (812.6, 951.5) = 7 58 30.03 33 1 8.8
  Extent = 5.0 (4.1-6.2)", rotation angle = 0
  Source counts = 100.6 +/- 12.9
  Background counts = 66.2
  Rate = 0.003 +/- 0.0004
[Sat Oct 15 06:42:30 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:42:30 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:42:30 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:42:30 2011] Source does appear to be extended
[Sat Oct 15 06:42:30 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:43:31 2011] Not overwriting source region fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.reg
[Sat Oct 15 06:43:31 2011] Extracting stamp from image fullrun_ccd6_acisf07570_pi14-548_cl_sm2.00.img.gz, (585, 724) - (1040, 1091)
[Sat Oct 15 06:43:31 2011] Writing fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1.gif
[Sat Oct 15 06:43:33 2011] ../../acisf07570/products/events/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.evt and ../../acisf07570/products/events/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Oct 15 06:43:33 2011] Size of ../../acisf07570/products/events/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.evt.gz[events] = 155 counts
[Sat Oct 15 06:43:33 2011] Mean chipx,y = (120.08, 226.66)
[Sat Oct 15 06:43:33 2011] Mean tdetx,y = (2995.08, 1928.66)
[Sat Oct 15 06:43:33 2011] chipx,y range = (68.00-165.00, 184.00-271.00)
[Sat Oct 15 06:43:33 2011] Size of ../../acisf07570/products/events/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 507 counts
[Sat Oct 15 06:43:33 2011] ../../acisf07570/products/images/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.img and ../../acisf07570/products/images/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Oct 15 06:43:33 2011] ../../acisf07570/products/spectra/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.pi and ../../acisf07570/products/spectra/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Oct 15 06:43:36 2011] ../../acisf07570/products/lightcurves/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.lc and ../../acisf07570/products/lightcurves/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Oct 15 06:43:58 2011] Keeping rmf generated by specextract
[Sat Oct 15 06:43:58 2011] 174.091
[Sat Oct 15 06:44:59 2011] Updating aperture counts using extracted products
[Sat Oct 15 06:44:59 2011] Error reading totcts from fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_src.pi.gz
[Sat Oct 15 06:44:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:44:59 2011] Using photon index=1.80, rate=0.00308, arf fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 06:44:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:44:59 2011] Updating source flux to 3.7e-14
[Sat Oct 15 06:45:11 2011] Reading fit data from acisf07570/analysis//spectral/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_pl.csv
[Sat Oct 15 06:45:11 2011] Spectral fit parameter nH value = 1.18201e+21
[Sat Oct 15 06:45:11 2011] Spectral fit parameter PhoIndex value = 2.20153
[Sat Oct 15 06:45:11 2011] Failed to get F(0.3-8.0) from acisf07570/analysis//spectral/fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 06:45:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:45:11 2011] Using Nh = 1.2e+21, photon index=2.20, rate=0.00308, arf fullrun_ccd6_acisf07570_pi14-548_pass1_cl_src1.arf
[Sat Oct 15 06:45:11 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:45:11 2011] Updating source flux to 3.2e-14