[Sat Oct 15 06:41:05 2011] Detection parameters:
  Position = (802.0, 818.8) = 7 59 21.30 32 49 33.5
  Extent = 3.1" x 2.2", rotation angle = 126 degrees
  Source counts = 107.2 +/- 11.3
  Background counts = 20.8
  Rate = 0.003 +/- 0.0003

[Sat Oct 15 06:41:05 2011] Off-axis axis estimate = 9.20'
[Sat Oct 15 06:41:55 2011] Using EEF radius (= 3.74 ")to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:41:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:41:55 2011] Initial guess for spatial extent in simple fitting = 3.74"
[Sat Oct 15 06:41:55 2011] source mask rpix=7.6, npix_max = 262, mask sum = 256, frac = 0.974
[Sat Oct 15 06:41:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 3.74"
[Sat Oct 15 06:41:55 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1.ximg exists
[Sat Oct 15 06:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:41:55 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1_1.ximg exists
[Sat Oct 15 06:41:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1.csv
[Sat Oct 15 06:41:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07570_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:41:55 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sat Oct 15 06:41:55 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:41:55 2011] Fit fullrun_ccd3_acisf07570_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:42:03 2011] Spatial fit model total counts = 146.799000, observed total counts = 151.000000
[Sat Oct 15 06:42:03 2011] Offset between fit and detection position for source 6 = 1.105259 pixels
[Sat Oct 15 06:42:03 2011] 147.168300 total counts/ 39.361300 bgd. counts: snr = 17.183524
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 1.105259 pixels
  Position = (801.2, 819.5) = 7 59 21.36 32 49 33.6
  Extent = 2.8 (2.2-3.4)", rotation angle = 0
  Source counts = 107.8 +/- 12.1
  Background counts = 39.4
  Rate = 0.003 +/- 0.0004
[Sat Oct 15 06:42:03 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:42:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:42:03 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:42:03 2011] Source does appear to be extended
[Sat Oct 15 06:42:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:42:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 15 06:42:21 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Oct 15 06:42:21 2011] Initial guess for spatial extent in simple fitting = 2.82"
[Sat Oct 15 06:42:21 2011] source mask rpix=5.7, npix_max = 155, mask sum = 156, frac = 1.004
[Sat Oct 15 06:42:21 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 2.82"
[Sat Oct 15 06:42:21 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1.ximg exists
[Sat Oct 15 06:42:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:42:21 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1_1.ximg exists
[Sat Oct 15 06:42:21 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1.csv
[Sat Oct 15 06:42:21 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07570_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 15 06:42:21 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sat Oct 15 06:42:21 2011] fullrun_ccd3_acisf07570_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Oct 15 06:42:21 2011] Fit fullrun_ccd3_acisf07570_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Oct 15 06:42:28 2011] Spatial fit model total counts = 133.827000, observed total counts = 137.000000
[Sat Oct 15 06:42:28 2011] Offset between fit and detection position for source 6 = 0.338725 pixels
[Sat Oct 15 06:42:28 2011] 133.344800 total counts/ 29.503800 bgd. counts: snr = 19.117447
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.338725 pixels
  Position = (801.3, 819.8) = 7 59 21.35 32 49 33.8
  Extent = 2.7 (1.9-3.4)", rotation angle = 0
  Source counts = 103.8 +/- 11.5
  Background counts = 29.5
  Rate = 0.003 +/- 0.0004
[Sat Oct 15 06:42:28 2011] Vigneting correction estimate = 1.000000
[Sat Oct 15 06:42:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 15 06:42:28 2011] Assessing source extent using major axis lower bound
[Sat Oct 15 06:42:28 2011] Source does appear to be extended
[Sat Oct 15 06:42:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 15 06:43:10 2011] Not overwriting source region fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.reg
[Sat Oct 15 06:43:10 2011] Extracting stamp from image fullrun_ccd3_acisf07570_pi14-548_cl_sm2.00.img.gz, (680, 698) - (923, 941)
[Sat Oct 15 06:43:10 2011] Writing fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6.gif
[Sat Oct 15 06:43:10 2011] ../../acisf07570/products/events/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.evt and ../../acisf07570/products/events/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Sat Oct 15 06:43:10 2011] Size of ../../acisf07570/products/events/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.evt.gz[events] = 133 counts
[Sat Oct 15 06:43:10 2011] Mean chipx,y = (243.32, 780.75)
[Sat Oct 15 06:43:10 2011] Mean tdetx,y = (4351.25, 3304.32)
[Sat Oct 15 06:43:10 2011] chipx,y range = (212.00-276.00, 748.00-809.00)
[Sat Oct 15 06:43:10 2011] Size of ../../acisf07570/products/events/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 153 counts
[Sat Oct 15 06:43:10 2011] ../../acisf07570/products/images/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.img and ../../acisf07570/products/images/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Sat Oct 15 06:43:10 2011] ../../acisf07570/products/spectra/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.pi and ../../acisf07570/products/spectra/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Sat Oct 15 06:43:14 2011] ../../acisf07570/products/lightcurves/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.lc and ../../acisf07570/products/lightcurves/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Sat Oct 15 06:43:31 2011] Keeping rmf generated by specextract
[Sat Oct 15 06:43:31 2011] 165.297
[Sat Oct 15 06:44:59 2011] Updating aperture counts using extracted products
[Sat Oct 15 06:44:59 2011] Error reading totcts from fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_src.pi.gz
[Sat Oct 15 06:44:59 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:44:59 2011] Using photon index=1.80, rate=0.00318, arf fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6.arf
[Sat Oct 15 06:44:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:44:59 2011] Updating source flux to 4.3e-14
[Sat Oct 15 06:45:06 2011] Reading fit data from acisf07570/analysis//spectral/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_pl.csv
[Sat Oct 15 06:45:06 2011] Spectral fit parameter nH value = 1.55314e+20
[Sat Oct 15 06:45:06 2011] Spectral fit parameter PhoIndex value = 1.9605
[Sat Oct 15 06:45:06 2011] Failed to get F(0.3-8.0) from acisf07570/analysis//spectral/fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Sat Oct 15 06:45:06 2011] Calculating source flux in energy range 0.30-8.00
[Sat Oct 15 06:45:06 2011] Using Nh = 1.6e+20, photon index=1.96, rate=0.00318, arf fullrun_ccd3_acisf07570_pi14-548_pass1_cl_src6.arf
[Sat Oct 15 06:45:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Oct 15 06:45:06 2011] Updating source flux to 4.3e-14