[Sun Sep 25 16:39:48 2011] Detection parameters:
  Position = (307.1, 878.4) = 17 40 56.88 -53 37 49.0
  Extent = 0.9" x 0.6", rotation angle = 21 degrees
  Source counts = 87.0 +/- 10.0
  Background counts = 13.0
  Rate = 0.0006 +/- 7e-05

[Sun Sep 25 16:39:52 2011] Off-axis axis estimate = 3.44'
[Sun Sep 25 16:41:55 2011] Using EEF radius (= 0.68 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 16:41:55 2011] Initial guess for spatial extent in simple fitting = 0.68"
[Sun Sep 25 16:41:55 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.852
[Sun Sep 25 16:41:55 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 0.68"
[Sun Sep 25 16:41:56 2011] fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28.ximg exists
[Sun Sep 25 16:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28.csv
[Sun Sep 25 16:41:56 2011] fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28_1.ximg exists
[Sun Sep 25 16:41:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28.csv
[Sun Sep 25 16:41:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf07460_pi14-548_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 16:41:59 2011] fullrun_ccd7_acisf07460_pi14-548_cl_pass0_tfrozen_src28.ximg exists
[Sun Sep 25 16:41:59 2011] fullrun_ccd7_acisf07460_pi14-548_cl_pass0_tfrozen_src28_1.ximg exists
[Sun Sep 25 16:41:59 2011] Fit fullrun_ccd7_acisf07460_pi14-548_cl_pass0_tfrozen_src28 appears to have run properly
[Sun Sep 25 16:42:27 2011] Spatial fit model total counts = 119.011000, observed total counts = 120.000000
[Sun Sep 25 16:42:27 2011] Offset between fit and detection position for source 28 = 7.669525 pixels
[Sun Sep 25 16:42:27 2011] 122.766035 total counts/ 122.766000 bgd. counts: snr = 0.000003
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 7.669525 pixels
  Position = (311.8, 884.5) = 17 40 56.65 -53 37 46.2
  Extent = 1.5 (0.2-2.8)", rotation angle = 0
  Source counts = 0.0 +/- 11.1
  Background counts = 122.8
  Rate = 2e-10 +/- 8e-05
  Deleting source due to low Poisson probability