[Sun Sep 25 16:39:38 2011] Detection parameters: Position = (306.4, 817.4) = 17 40 34.57 -53 51 1.1 Extent = 2.5" x 1.5", rotation angle = 51 degrees Source counts = 16.5 +/- 6.3 Background counts = 23.5 Rate = 0.0001 +/- 4e-05 [Sun Sep 25 16:39:38 2011] Off-axis axis estimate = 10.32' [Sun Sep 25 16:41:47 2011] Using EEF radius (= 4.72 ")to estimate initial spatial extent for simple fitting [Sun Sep 25 16:41:47 2011] Initial guess for spatial extent in simple fitting = 4.72" [Sun Sep 25 16:41:47 2011] source mask rpix=9.6, npix_max = 408, mask sum = 421, frac = 1.031 [Sun Sep 25 16:41:47 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 4.72" [Sun Sep 25 16:41:48 2011] fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11.ximg exists [Sun Sep 25 16:41:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11.csv [Sun Sep 25 16:41:48 2011] fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11_1.ximg exists [Sun Sep 25 16:41:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11.csv [Sun Sep 25 16:41:48 2011] It looks like the fit did not converge You should probably delete fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_ccd2_acisf07460_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Sep 25 16:41:48 2011] fullrun_ccd2_acisf07460_pi14-548_cl_pass0_tfrozen_src11.ximg exists [Sun Sep 25 16:41:48 2011] fullrun_ccd2_acisf07460_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists [Sun Sep 25 16:41:48 2011] Fit fullrun_ccd2_acisf07460_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly [Sun Sep 25 16:42:07 2011] Spatial fit model total counts = 175.501000, observed total counts = 173.000000 [Sun Sep 25 16:42:07 2011] Offset between fit and detection position for source 11 = 2.132469 pixels [Sun Sep 25 16:42:07 2011] 175.630200 total counts/ 160.341000 bgd. counts: snr = 1.207431 Spatial fit parameters: Offset between fit and detection position for source 11 = 2.132469 pixels Position = (304.3, 817.6) = 17 40 34.71 -53 51 1.2 Extent = 1.2" x 1.2", rotation angle = 0 Source counts = 15.3 +/- 13.3 Background counts = 160.3 Rate = 0.0001 +/- 9e-05 Deleting source due to low Poisson probability