[Wed Sep 21 01:13:00 2011] Detection parameters:
  Position = (1032.7, 1061.4) = 15 1 33.76 23 0 51.8
  Extent = 3.4" x 2.8", rotation angle = 117 degrees
  Source counts = 246.1 +/- 18.9
  Background counts = 109.9
  Rate = 0.008 +/- 0.0006

[Wed Sep 21 01:13:01 2011] Off-axis axis estimate = 12.48'
[Wed Sep 21 01:13:57 2011] Using EEF radius (= 6.96 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 01:13:57 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 01:13:57 2011] Initial guess for spatial extent in simple fitting = 6.96"
[Wed Sep 21 01:13:57 2011] source mask rpix=14.2, npix_max = 859, mask sum = 841, frac = 0.979
[Wed Sep 21 01:13:57 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 6.96"
[Wed Sep 21 01:13:57 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 01:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 01:13:57 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 01:13:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 01:13:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07429_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 01:13:57 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 01:13:57 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 01:13:57 2011] Fit fullrun_ccd3_acisf07429_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 01:14:03 2011] Spatial fit model total counts = 478.990000, observed total counts = 453.000000
[Wed Sep 21 01:14:03 2011] Offset between fit and detection position for source 1 = 0.273610 pixels
[Wed Sep 21 01:14:03 2011] 478.879500 total counts/ 97.763500 bgd. counts: snr = 38.545068
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.273610 pixels
  Position = (1032.7, 1061.1) = 15 1 33.78 23 0 51.4
  Extent = 7.5 (6.9-8.4)", rotation angle = 0
  Source counts = 381.1 +/- 21.9
  Background counts = 97.8
  Rate = 0.01 +/- 0.0007
[Wed Sep 21 01:14:03 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 01:14:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 01:14:03 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 01:14:03 2011] Source does appear to be extended
[Wed Sep 21 01:14:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 01:14:42 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 01:14:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 01:14:42 2011] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Sep 21 01:14:42 2011] source mask rpix=15.3, npix_max = 994, mask sum = 992, frac = 0.998
[Wed Sep 21 01:14:42 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.51"
[Wed Sep 21 01:14:43 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 01:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 01:14:43 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 01:14:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 01:14:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07429_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 01:14:43 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 01:14:43 2011] fullrun_ccd3_acisf07429_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 01:14:43 2011] Fit fullrun_ccd3_acisf07429_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 01:14:54 2011] Spatial fit model total counts = 501.283000, observed total counts = 472.000000
[Wed Sep 21 01:14:54 2011] Offset between fit and detection position for source 1 = 0.107419 pixels
[Wed Sep 21 01:14:54 2011] 501.079000 total counts/ 126.700000 bgd. counts: snr = 33.260071
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.107419 pixels
  Position = (1032.8, 1061.1) = 15 1 33.78 23 0 51.4
  Extent = 7.4 (6.8-8.2)", rotation angle = 0
  Source counts = 374.4 +/- 22.4
  Background counts = 126.7
  Rate = 0.01 +/- 0.0008
[Wed Sep 21 01:14:54 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 01:14:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 01:14:54 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 01:14:54 2011] Source does appear to be extended
[Wed Sep 21 01:14:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 01:15:32 2011] Not overwriting source region fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 01:15:32 2011] Extracting stamp from image fullrun_ccd3_acisf07429_pi14-548_cl_sm2.00.img.gz, (693, 721) - (1373, 1385)
[Wed Sep 21 01:15:32 2011] Writing fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 01:15:33 2011] ../../acisf07429/products/events/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.evt and ../../acisf07429/products/events/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 01:15:33 2011] Size of ../../acisf07429/products/events/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.evt.gz[events] = 448 counts
[Wed Sep 21 01:15:33 2011] Mean chipx,y = (666.62, 994.18)
[Wed Sep 21 01:15:33 2011] Mean tdetx,y = (4137.82, 3727.62)
[Wed Sep 21 01:15:33 2011] chipx,y range = (594.00-733.00, 941.00-1022.00)
[Wed Sep 21 01:15:33 2011] Size of ../../acisf07429/products/events/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 698 counts
[Wed Sep 21 01:15:33 2011] ../../acisf07429/products/images/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.img and ../../acisf07429/products/images/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 01:15:33 2011] ../../acisf07429/products/spectra/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.pi and ../../acisf07429/products/spectra/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 01:15:37 2011] ../../acisf07429/products/lightcurves/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.lc and ../../acisf07429/products/lightcurves/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 01:15:50 2011] Keeping rmf generated by specextract
[Wed Sep 21 01:15:50 2011] 151.313
[Wed Sep 21 01:19:49 2011] Updating aperture counts using extracted products
[Wed Sep 21 01:19:49 2011] Error reading totcts from fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 01:19:49 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 01:19:49 2011] Using photon index=1.80, rate=0.0126, arf fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 01:19:49 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 01:19:49 2011] Updating source flux to 1.7e-13
[Wed Sep 21 01:19:58 2011] Reading fit data from acisf07429/analysis//spectral/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 01:19:58 2011] Spectral fit parameter nH value = 7.00695e+13
[Wed Sep 21 01:19:58 2011] Spectral fit parameter PhoIndex value = 3.26258
[Wed Sep 21 01:19:58 2011] Failed to get F(0.3-8.0) from acisf07429/analysis//spectral/fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 01:19:58 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 01:19:58 2011] Using Nh = 7e+13, photon index=3.26, rate=0.0126, arf fullrun_ccd3_acisf07429_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 01:19:58 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 01:19:58 2011] Updating source flux to 2.4e-13