[Wed Sep 21 02:36:05 2011] Detection parameters:
  Position = (587.6, 351.1) = 20 58 38.98 77 37 39.0
  Extent = 0.8" x 0.7", rotation angle = 126 degrees
  Source counts = 122.8 +/- 11.2
  Background counts = 3.2
  Rate = 0.003 +/- 0.0003

[Wed Sep 21 02:36:06 2011] Off-axis axis estimate = 5.50'
[Wed Sep 21 02:37:05 2011] Using EEF radius (= 1.39 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 02:37:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 02:37:05 2011] Initial guess for spatial extent in simple fitting = 1.39"
[Wed Sep 21 02:37:05 2011] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.945
[Wed Sep 21 02:37:05 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.39"
[Wed Sep 21 02:37:06 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 02:37:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 02:37:06 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 02:37:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 02:37:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 02:37:07 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 02:37:07 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 02:37:07 2011] Fit fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 02:37:16 2011] Spatial fit model total counts = 140.711000, observed total counts = 143.000000
[Wed Sep 21 02:37:16 2011] Offset between fit and detection position for source 5 = 0.692138 pixels
[Wed Sep 21 02:37:16 2011] 140.365100 total counts/ 20.101100 bgd. counts: snr = 26.824135
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.692138 pixels
  Position = (588.0, 351.6) = 20 58 38.99 77 37 39.0
  Extent = 1.1 (0.9-1.2)", rotation angle = 0
  Source counts = 120.3 +/- 11.8
  Background counts = 20.1
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 02:37:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 02:37:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 02:37:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 02:37:16 2011] Source does appear to be extended
[Wed Sep 21 02:37:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 02:37:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 02:37:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 02:37:43 2011] Initial guess for spatial extent in simple fitting = 1.05"
[Wed Sep 21 02:37:43 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.078
[Wed Sep 21 02:37:43 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.05"
[Wed Sep 21 02:37:43 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 02:37:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 02:37:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 02:37:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 02:37:44 2011] Fit fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 02:37:56 2011] Spatial fit model total counts = 131.312000, observed total counts = 134.000000
[Wed Sep 21 02:37:56 2011] Offset between fit and detection position for source 5 = 0.055545 pixels
[Wed Sep 21 02:37:56 2011] 132.077500 total counts/ 13.383500 bgd. counts: snr = 32.444711
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.055545 pixels
  Position = (588.0, 351.6) = 20 58 38.99 77 37 39.0
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 118.7 +/- 11.5
  Background counts = 13.4
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 02:37:56 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 02:37:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 02:37:56 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 02:37:56 2011] Source does appear to be extended
[Wed Sep 21 02:37:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 02:38:50 2011] Not overwriting source region fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.reg
[Wed Sep 21 02:38:50 2011] Extracting stamp from image fullrun_ccd1_acisf07425_pi14-548_cl_sm2.00.img.gz, (540, 304) - (636, 399)
[Wed Sep 21 02:38:50 2011] Writing fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5.gif
[Wed Sep 21 02:38:51 2011] ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.evt and ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_bgd.evt exist, delete to re-create
[Wed Sep 21 02:38:51 2011] Size of ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.evt.gz[events] = 132 counts
[Wed Sep 21 02:38:51 2011] Mean chipx,y = (263.77, 450.23)
[Wed Sep 21 02:38:51 2011] Mean tdetx,y = (4681.77, 4370.77)
[Wed Sep 21 02:38:51 2011] chipx,y range = (238.00-284.00, 429.00-470.00)
[Wed Sep 21 02:38:51 2011] Size of ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 40 counts
[Wed Sep 21 02:38:51 2011] ../../acisf07425/products/images/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.img and ../../acisf07425/products/images/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_bgd.img exist, delete to re-create
[Wed Sep 21 02:38:51 2011] ../../acisf07425/products/spectra/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.pi and ../../acisf07425/products/spectra/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_bgd.pi exist, delete to re-create
[Wed Sep 21 02:38:54 2011] ../../acisf07425/products/lightcurves/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.lc and ../../acisf07425/products/lightcurves/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_bgd.lc exist, delete to re-create
[Wed Sep 21 02:39:46 2011] Keeping rmf generated by specextract
[Wed Sep 21 02:39:46 2011] 181.713
[Wed Sep 21 02:42:44 2011] Updating aperture counts using extracted products
[Wed Sep 21 02:42:44 2011] Error reading totcts from fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_src.pi.gz
[Wed Sep 21 02:42:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 02:42:44 2011] Using photon index=1.80, rate=0.00323, arf fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5.arf
[Wed Sep 21 02:42:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 02:42:44 2011] Updating source flux to 4e-14
[Wed Sep 21 02:42:53 2011] Reading fit data from acisf07425/analysis//spectral/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_pl.csv
[Wed Sep 21 02:42:53 2011] Spectral fit parameter nH value = 5.55307e+20
[Wed Sep 21 02:42:53 2011] Spectral fit parameter PhoIndex value = 1.18507
[Wed Sep 21 02:42:53 2011] Failed to get F(0.3-8.0) from acisf07425/analysis//spectral/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 02:42:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 02:42:53 2011] Using Nh = 5.6e+20, photon index=1.19, rate=0.00323, arf fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src5.arf
[Wed Sep 21 02:42:53 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 02:42:53 2011] Updating source flux to 5e-14