[Wed Sep 21 02:36:05 2011] Detection parameters:
  Position = (539.1, 689.8) = 20 58 46.79 77 40 25.4
  Extent = 1.9" x 1.6", rotation angle = 24 degrees
  Source counts = 75.2 +/- 9.2
  Background counts = 8.8
  Rate = 0.002 +/- 0.0002

[Wed Sep 21 02:36:06 2011] Off-axis axis estimate = 7.27'
[Wed Sep 21 02:37:05 2011] Using EEF radius (= 2.35 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 02:37:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 02:37:05 2011] Initial guess for spatial extent in simple fitting = 2.35"
[Wed Sep 21 02:37:05 2011] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.990
[Wed Sep 21 02:37:05 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.35"
[Wed Sep 21 02:37:06 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 21 02:37:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 02:37:06 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 21 02:37:06 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 02:37:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07425_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 02:37:07 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 21 02:37:07 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 21 02:37:07 2011] Fit fullrun_ccd1_acisf07425_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 21 02:37:16 2011] Spatial fit model total counts = 90.454300, observed total counts = 90.000000
[Wed Sep 21 02:37:16 2011] Offset between fit and detection position for source 3 = 1.278206 pixels
[Wed Sep 21 02:37:16 2011] 89.943000 total counts/ 14.111900 bgd. counts: snr = 20.186202
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.278206 pixels
  Position = (540.2, 690.5) = 20 58 46.70 77 40 25.6
  Extent = 2.2 (1.7-2.8)", rotation angle = 0
  Source counts = 75.8 +/- 9.5
  Background counts = 14.1
  Rate = 0.002 +/- 0.0003
[Wed Sep 21 02:37:16 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 02:37:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 02:37:16 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 02:37:16 2011] Source does appear to be extended
[Wed Sep 21 02:37:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 02:37:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 02:37:43 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 02:37:43 2011] Initial guess for spatial extent in simple fitting = 2.24"
[Wed Sep 21 02:37:43 2011] source mask rpix=4.6, npix_max = 102, mask sum = 110, frac = 1.078
[Wed Sep 21 02:37:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.24"
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 21 02:37:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 21 02:37:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 02:37:44 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07425_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 21 02:37:44 2011] fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 21 02:37:44 2011] Fit fullrun_ccd1_acisf07425_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 21 02:37:56 2011] Spatial fit model total counts = 88.800900, observed total counts = 89.000000
[Wed Sep 21 02:37:56 2011] Offset between fit and detection position for source 3 = 0.282079 pixels
[Wed Sep 21 02:37:56 2011] 87.978700 total counts/ 13.729700 bgd. counts: snr = 20.038264
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.282079 pixels
  Position = (540.5, 690.6) = 20 58 46.66 77 40 25.6
  Extent = 2.2 (1.6-2.7)", rotation angle = 0
  Source counts = 74.2 +/- 9.4
  Background counts = 13.7
  Rate = 0.002 +/- 0.0003
[Wed Sep 21 02:37:56 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 02:37:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 02:37:56 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 02:37:56 2011] Source does appear to be extended
[Wed Sep 21 02:37:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 02:38:50 2011] Not overwriting source region fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 21 02:38:50 2011] Extracting stamp from image fullrun_ccd1_acisf07425_pi14-548_cl_sm2.00.img.gz, (440, 590) - (641, 791)
[Wed Sep 21 02:38:50 2011] Writing fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3.gif
[Wed Sep 21 02:38:56 2011] ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.evt and ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 21 02:38:56 2011] Size of ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.evt.gz[events] = 90 counts
[Wed Sep 21 02:38:56 2011] Mean chipx,y = (604.88, 470.52)
[Wed Sep 21 02:38:56 2011] Mean tdetx,y = (4661.48, 4711.88)
[Wed Sep 21 02:38:56 2011] chipx,y range = (585.00-630.00, 445.00-496.00)
[Wed Sep 21 02:38:56 2011] Size of ../../acisf07425/products/events/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 122 counts
[Wed Sep 21 02:38:56 2011] ../../acisf07425/products/images/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.img and ../../acisf07425/products/images/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 21 02:38:56 2011] ../../acisf07425/products/spectra/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.pi and ../../acisf07425/products/spectra/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 21 02:38:56 2011] Not generating rmf since there are only 74 counts
[Wed Sep 21 02:38:59 2011] ../../acisf07425/products/lightcurves/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.lc and ../../acisf07425/products/lightcurves/fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 21 02:39:46 2011] 180.719
[Wed Sep 21 02:42:44 2011] Updating aperture counts using extracted products
[Wed Sep 21 02:42:44 2011] Error reading totcts from fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 21 02:42:44 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 02:42:44 2011] Using photon index=1.80, rate=0.00202, arf fullrun_ccd1_acisf07425_pi14-548_pass1_cl_src3.arf
[Wed Sep 21 02:42:44 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 02:42:44 2011] Updating source flux to 2.5e-14
[Wed Sep 21 02:42:49 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting