[Fri Oct 21 16:29:32 2011] Detection parameters:
  Position = (832.4, 328.9) = 2 27 12.10 61 57 34.1
  Extent = 0.6" x 0.5", rotation angle = 81 degrees
  Source counts = 14.5 +/- 4.0
  Background counts = 1.5
  Rate = 0.0003 +/- 8e-05

[Fri Oct 21 16:29:33 2011] Off-axis axis estimate = 5.39'
[Fri Oct 21 16:31:02 2011] Using EEF radius (= 1.34 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:02 2011] Initial guess for spatial extent in simple fitting = 1.34"
[Fri Oct 21 16:31:02 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.007
[Fri Oct 21 16:31:02 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 1.34"
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16.csv
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16.csv
[Fri Oct 21 16:31:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Oct 21 16:31:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Oct 21 16:31:04 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Oct 21 16:31:31 2011] Spatial fit model total counts = 24.876500, observed total counts = 25.000000
[Fri Oct 21 16:31:31 2011] Offset between fit and detection position for source 44 = 0.507716 pixels
[Fri Oct 21 16:31:31 2011] 25.763500 total counts/ 11.940300 bgd. counts: snr = 4.000377
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.507716 pixels
  Position = (832.8, 329.2) = 2 27 12.11 61 57 34.0
  Extent = 0.7 (0.4-0.9)", rotation angle = 0
  Source counts = 13.8 +/- 5.1
  Background counts = 11.9
  Rate = 0.0003 +/- 0.0001
[Fri Oct 21 16:31:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:31 2011] Source does appear to be extended
[Fri Oct 21 16:31:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:32:03 2011] Initial guess for spatial extent in simple fitting = 0.65"
[Fri Oct 21 16:32:03 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.201
[Fri Oct 21 16:32:03 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.65"
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16.csv
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16.csv
[Fri Oct 21 16:32:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:32:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct 21 16:32:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct 21 16:32:04 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Oct 21 16:32:29 2011] Spatial fit model total counts = 24.953900, observed total counts = 25.000000
[Fri Oct 21 16:32:29 2011] Offset between fit and detection position for source 44 = 0.031981 pixels
[Fri Oct 21 16:32:29 2011] 25.859200 total counts/ 12.349600 bgd. counts: snr = 3.844289
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.031981 pixels
  Position = (832.8, 329.2) = 2 27 12.11 61 57 34.0
  Extent = 0.6 (0.3-1.0)", rotation angle = 0
  Source counts = 13.5 +/- 5.1
  Background counts = 12.3
  Rate = 0.0003 +/- 0.0001
[Fri Oct 21 16:32:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:29 2011] Source does appear to be extended
[Fri Oct 21 16:32:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:39:35 2011] Not overwriting source region fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.reg
[Fri Oct 21 16:39:35 2011] Extracting stamp from image fullrun_ccd3_acisf07356_pi14-548_cl_sm2.00.img.gz, (803, 300) - (862, 359)
[Fri Oct 21 16:39:35 2011] Writing fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44.gif
[Fri Oct 21 16:40:18 2011] ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.evt and ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_bgd.evt exist, delete to re-create
[Fri Oct 21 16:40:18 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.evt.gz[events] = 18 counts
[Fri Oct 21 16:40:18 2011] Mean chipx,y = (314.61, 867.72)
[Fri Oct 21 16:40:18 2011] Mean tdetx,y = (4264.28, 3375.61)
[Fri Oct 21 16:40:18 2011] chipx,y range = (297.00-331.00, 847.00-883.00)
[Fri Oct 21 16:40:18 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_bgd.evt.gz[events] = 14 counts
[Fri Oct 21 16:40:18 2011] ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.img and ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_bgd.img exist, delete to re-create
[Fri Oct 21 16:40:18 2011] ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.pi and ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_bgd.pi exist, delete to re-create
[Fri Oct 21 16:40:18 2011] Not generating rmf since there are only 13 counts
[Fri Oct 21 16:40:21 2011] ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_bgd.lc exist, delete to re-create
[Fri Oct 21 16:42:27 2011] 179.148
[Fri Oct 21 16:42:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:42 2011] Error reading totcts from fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44_src.pi.gz
[Fri Oct 21 16:42:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:43 2011] Using photon index=1.80, rate=0.000273, arf fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src44.arf
[Fri Oct 21 16:42:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:43 2011] Updating source flux to 4.2e-15
[Fri Oct 21 16:43:33 2011] Source 44 has fewer than 100.000000 counts, skipping spectral fitting