[Fri Oct 21 16:29:30 2011] Detection parameters:
  Position = (720.6, 591.2) = 2 27 19.96 61 59 43.0
  Extent = 0.8" x 0.6", rotation angle = 93 degrees
  Source counts = 21.1 +/- 4.8
  Background counts = 1.9
  Rate = 0.0004 +/- 0.0001

[Fri Oct 21 16:29:33 2011] Off-axis axis estimate = 5.60'
[Fri Oct 21 16:31:02 2011] Using EEF radius (= 1.44 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:02 2011] Initial guess for spatial extent in simple fitting = 1.44"
[Fri Oct 21 16:31:02 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046
[Fri Oct 21 16:31:02 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 1.44"
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10.csv
[Fri Oct 21 16:31:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 21 16:31:03 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 21 16:31:30 2011] Spatial fit model total counts = 25.328900, observed total counts = 26.000000
[Fri Oct 21 16:31:30 2011] Offset between fit and detection position for source 4 = 0.962917 pixels
[Fri Oct 21 16:31:30 2011] 25.788950 total counts/ 5.523250 bgd. counts: snr = 8.623117
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.962917 pixels
  Position = (721.0, 592.1) = 2 27 19.97 61 59 43.2
  Extent = 0.9 (0.6-1.1)", rotation angle = 0
  Source counts = 20.3 +/- 5.1
  Background counts = 5.5
  Rate = 0.0004 +/- 0.0001
[Fri Oct 21 16:31:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:31 2011] Source does appear to be extended
[Fri Oct 21 16:31:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:32:03 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Fri Oct 21 16:32:03 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.769
[Fri Oct 21 16:32:03 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.88"
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10.csv
[Fri Oct 21 16:32:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:32:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 21 16:32:04 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 21 16:32:04 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 21 16:32:29 2011] Spatial fit model total counts = 25.020200, observed total counts = 25.000000
[Fri Oct 21 16:32:29 2011] Offset between fit and detection position for source 4 = 0.195677 pixels
[Fri Oct 21 16:32:29 2011] 25.245750 total counts/ 2.600550 bgd. counts: snr = 14.042472
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.195677 pixels
  Position = (721.1, 591.9) = 2 27 19.96 61 59 43.1
  Extent = 1.0 (0.5-1.3)", rotation angle = 0
  Source counts = 22.6 +/- 5.0
  Background counts = 2.6
  Rate = 0.0005 +/- 0.0001
[Fri Oct 21 16:32:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:29 2011] Source does appear to be extended
[Fri Oct 21 16:32:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:39:35 2011] Not overwriting source region fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.reg
[Fri Oct 21 16:39:35 2011] Extracting stamp from image fullrun_ccd3_acisf07356_pi14-548_cl_sm2.00.img.gz, (677, 548) - (766, 636)
[Fri Oct 21 16:39:35 2011] Writing fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4.gif
[Fri Oct 21 16:40:02 2011] ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.evt and ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Fri Oct 21 16:40:02 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.evt.gz[events] = 25 counts
[Fri Oct 21 16:40:02 2011] Mean chipx,y = (422.44, 599.32)
[Fri Oct 21 16:40:02 2011] Mean tdetx,y = (4532.68, 3483.44)
[Fri Oct 21 16:40:02 2011] chipx,y range = (400.00-436.00, 583.00-618.00)
[Fri Oct 21 16:40:02 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 33 counts
[Fri Oct 21 16:40:02 2011] ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.img and ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Fri Oct 21 16:40:02 2011] ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.pi and ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Fri Oct 21 16:40:02 2011] Not generating rmf since there are only 22 counts
[Fri Oct 21 16:40:05 2011] ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Fri Oct 21 16:42:27 2011] 179.231
[Fri Oct 21 16:42:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:42 2011] Error reading totcts from fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4_src.pi.gz
[Fri Oct 21 16:42:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:43 2011] Using photon index=1.80, rate=0.000458, arf fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src4.arf
[Fri Oct 21 16:42:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:43 2011] Updating source flux to 7e-15
[Fri Oct 21 16:43:33 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting