[Fri Oct 21 16:29:30 2011] Detection parameters:
  Position = (1372.3, 710.8) = 2 26 34.44 62 0 42.3
  Extent = 0.5" x 0.5", rotation angle = 66 degrees
  Source counts = 451.0 +/- 21.4
  Background counts = 6.0
  Rate = 0.009 +/- 0.0004

[Fri Oct 21 16:29:33 2011] Off-axis axis estimate = 0.47'
[Fri Oct 21 16:31:02 2011] Using EEF radius (= 0.39 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:02 2011] Initial guess for spatial extent in simple fitting = 0.39"
[Fri Oct 21 16:31:02 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.330
[Fri Oct 21 16:31:02 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.39"
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 16:31:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:31:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 16:31:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 16:31:03 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 16:31:30 2011] Spatial fit model total counts = 458.845000, observed total counts = 459.000000
[Fri Oct 21 16:31:30 2011] Offset between fit and detection position for source 3 = 0.673402 pixels
[Fri Oct 21 16:31:30 2011] 459.107800 total counts/ 35.550800 bgd. counts: snr = 71.037419
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.673402 pixels
  Position = (1372.8, 711.3) = 2 26 34.44 62 0 42.3
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 423.6 +/- 21.4
  Background counts = 35.6
  Rate = 0.009 +/- 0.0004
[Fri Oct 21 16:31:31 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:31 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:31 2011] Source does appear to be extended
[Fri Oct 21 16:31:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:03 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:32:03 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:32:03 2011] Initial guess for spatial extent in simple fitting = 0.56"
[Fri Oct 21 16:32:03 2011] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.829
[Fri Oct 21 16:32:03 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.56"
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 16:32:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 16:32:03 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07356_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 16:32:03 2011] fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 16:32:03 2011] Fit fullrun_ccd3_acisf07356_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 16:32:29 2011] Spatial fit model total counts = 458.989000, observed total counts = 459.000000
[Fri Oct 21 16:32:29 2011] Offset between fit and detection position for source 3 = 0.022739 pixels
[Fri Oct 21 16:32:29 2011] 456.718900 total counts/ 33.714900 bgd. counts: snr = 72.850668
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.022739 pixels
  Position = (1372.8, 711.3) = 2 26 34.44 62 0 42.3
  Extent = 0.6 (0.5-0.6)", rotation angle = 0
  Source counts = 423.0 +/- 21.4
  Background counts = 33.7
  Rate = 0.009 +/- 0.0004
[Fri Oct 21 16:32:29 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:29 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:29 2011] Source does appear to be extended
[Fri Oct 21 16:32:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:39:35 2011] Not overwriting source region fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.reg
[Fri Oct 21 16:39:35 2011] Extracting stamp from image fullrun_ccd3_acisf07356_pi14-548_cl_sm2.00.img.gz, (1347, 685) - (1399, 737)
[Fri Oct 21 16:39:35 2011] Writing fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3.gif
[Fri Oct 21 16:39:37 2011] ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.evt and ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Fri Oct 21 16:39:37 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.evt.gz[events] = 440 counts
[Fri Oct 21 16:39:37 2011] Mean chipx,y = (971.10, 970.37)
[Fri Oct 21 16:39:37 2011] Mean tdetx,y = (4161.63, 4032.10)
[Fri Oct 21 16:39:37 2011] chipx,y range = (950.00-990.00, 951.00-988.00)
[Fri Oct 21 16:39:37 2011] Size of ../../acisf07356/products/events/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 19 counts
[Fri Oct 21 16:39:37 2011] ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.img and ../../acisf07356/products/images/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Fri Oct 21 16:39:37 2011] ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.pi and ../../acisf07356/products/spectra/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Fri Oct 21 16:39:40 2011] ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Fri Oct 21 16:42:27 2011] Keeping rmf generated by specextract
[Fri Oct 21 16:42:27 2011] 203.627
[Fri Oct 21 16:42:42 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:42 2011] Error reading totcts from fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_src.pi.gz
[Fri Oct 21 16:42:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:43 2011] Using photon index=1.80, rate=0.00856, arf fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 16:42:43 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:43 2011] Updating source flux to 1.2e-13
[Fri Oct 21 16:43:41 2011] Reading fit data from acisf07356/analysis//spectral/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_pl.csv
[Fri Oct 21 16:43:41 2011] Spectral fit parameter nH value = 5.95639e+20
[Fri Oct 21 16:43:41 2011] Spectral fit parameter PhoIndex value = 2.71309
[Fri Oct 21 16:43:41 2011] Failed to get F(0.3-8.0) from acisf07356/analysis//spectral/fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 16:43:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:43:41 2011] Using Nh = 6e+20, photon index=2.71, rate=0.00856, arf fullrun_ccd3_acisf07356_pi14-548_pass1_cl_src3.arf
[Fri Oct 21 16:43:41 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:43:41 2011] Updating source flux to 8.5e-14