[Fri Oct 21 16:29:27 2011] Detection parameters:
  Position = (413.3, 883.4) = 2 26 49.64 61 56 3.6
  Extent = 1.1" x 0.7", rotation angle = 136 degrees
  Source counts = 806.8 +/- 28.7
  Background counts = 15.2
  Rate = 0.02 +/- 0.0006

[Fri Oct 21 16:29:30 2011] Off-axis axis estimate = 4.68'
[Fri Oct 21 16:31:00 2011] Using EEF radius (= 1.06 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:00 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:31:00 2011] Initial guess for spatial extent in simple fitting = 1.06"
[Fri Oct 21 16:31:00 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.889
[Fri Oct 21 16:31:00 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 1.06"
[Fri Oct 21 16:31:01 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 21 16:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:31:01 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 21 16:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1.csv
[Fri Oct 21 16:31:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 21 16:31:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 21 16:31:02 2011] Fit fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 21 16:31:27 2011] Spatial fit model total counts = 789.914000, observed total counts = 801.000000
[Fri Oct 21 16:31:27 2011] Offset between fit and detection position for source 6 = 0.549023 pixels
[Fri Oct 21 16:31:27 2011] 798.827100 total counts/ 71.853100 bgd. counts: snr = 85.762242
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.549023 pixels
  Position = (413.7, 883.7) = 2 26 49.64 61 56 3.5
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 727.0 +/- 28.3
  Background counts = 71.9
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 16:31:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:27 2011] Source does appear to be extended
[Fri Oct 21 16:31:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:32:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:32:01 2011] Initial guess for spatial extent in simple fitting = 0.98"
[Fri Oct 21 16:32:01 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.010
[Fri Oct 21 16:32:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.98"
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 21 16:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 21 16:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1.csv
[Fri Oct 21 16:32:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 21 16:32:02 2011] Fit fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 21 16:32:25 2011] Spatial fit model total counts = 796.436000, observed total counts = 799.000000
[Fri Oct 21 16:32:25 2011] Offset between fit and detection position for source 6 = 0.026022 pixels
[Fri Oct 21 16:32:25 2011] 804.686700 total counts/ 78.940700 bgd. counts: snr = 81.683467
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.026022 pixels
  Position = (413.7, 883.7) = 2 26 49.64 61 56 3.5
  Extent = 1.0 (0.9-1.0)", rotation angle = 0
  Source counts = 725.7 +/- 28.4
  Background counts = 78.9
  Rate = 0.01 +/- 0.0006
[Fri Oct 21 16:32:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:25 2011] Source does appear to be extended
[Fri Oct 21 16:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:37:09 2011] Not overwriting source region fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.reg
[Fri Oct 21 16:37:09 2011] Extracting stamp from image fullrun_ccd2_acisf07356_pi14-548_cl_sm2.00.img.gz, (369, 839) - (458, 928)
[Fri Oct 21 16:37:09 2011] Writing fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6.gif
[Fri Oct 21 16:37:11 2011] ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.evt and ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Fri Oct 21 16:37:11 2011] Size of ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.evt.gz[events] = 798 counts
[Fri Oct 21 16:37:11 2011] Mean chipx,y = (607.19, 843.98)
[Fri Oct 21 16:37:11 2011] Mean tdetx,y = (3904.98, 3478.81)
[Fri Oct 21 16:37:11 2011] chipx,y range = (585.00-628.00, 822.00-868.00)
[Fri Oct 21 16:37:11 2011] Size of ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 57 counts
[Fri Oct 21 16:37:11 2011] ../../acisf07356/products/images/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.img and ../../acisf07356/products/images/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Fri Oct 21 16:37:11 2011] ../../acisf07356/products/spectra/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.pi and ../../acisf07356/products/spectra/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Fri Oct 21 16:37:14 2011] ../../acisf07356/products/lightcurves/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Fri Oct 21 16:39:34 2011] Keeping rmf generated by specextract
[Fri Oct 21 16:39:34 2011] 184.606
[Fri Oct 21 16:42:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:41 2011] Error reading totcts from fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_src.pi.gz
[Fri Oct 21 16:42:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:42 2011] Using photon index=1.80, rate=0.0147, arf fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6.arf
[Fri Oct 21 16:42:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:42 2011] Updating source flux to 2.2e-13
[Fri Oct 21 16:43:33 2011] Reading fit data from acisf07356/analysis//spectral/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_pl.csv
[Fri Oct 21 16:43:33 2011] Spectral fit parameter nH value = 1.38302e+21
[Fri Oct 21 16:43:33 2011] Spectral fit parameter PhoIndex value = 2.58136
[Fri Oct 21 16:43:33 2011] Failed to get F(0.3-8.0) from acisf07356/analysis//spectral/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6_pl.csv, possibly due to different flux energy range selected
[Fri Oct 21 16:43:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:43:33 2011] Using Nh = 1.4e+21, photon index=2.58, rate=0.0147, arf fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src6.arf
[Fri Oct 21 16:43:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:43:33 2011] Updating source flux to 1.4e-13