[Fri Oct 21 16:29:26 2011] Detection parameters:
  Position = (877.4, 890.0) = 2 26 17.28 61 56 6.9
  Extent = 0.9" x 0.6", rotation angle = 160 degrees
  Source counts = 246.1 +/- 15.9
  Background counts = 6.9
  Rate = 0.005 +/- 0.0003

[Fri Oct 21 16:29:30 2011] Off-axis axis estimate = 4.54'
[Fri Oct 21 16:31:00 2011] Using EEF radius (= 1.01 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:00 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Fri Oct 21 16:31:00 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.156
[Fri Oct 21 16:31:00 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.01"
[Fri Oct 21 16:31:01 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2.ximg exists
[Fri Oct 21 16:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 16:31:01 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2_1.ximg exists
[Fri Oct 21 16:31:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2.csv
[Fri Oct 21 16:31:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07356_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Fri Oct 21 16:31:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Oct 21 16:31:02 2011] Fit fullrun_ccd2_acisf07356_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Oct 21 16:31:27 2011] Spatial fit model total counts = 249.995000, observed total counts = 250.000000
[Fri Oct 21 16:31:27 2011] Offset between fit and detection position for source 1 = 0.646939 pixels
[Fri Oct 21 16:31:27 2011] 249.313600 total counts/ 21.649600 bgd. counts: snr = 48.929347
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.646939 pixels
  Position = (877.9, 890.5) = 2 26 17.28 61 56 6.8
  Extent = 1.0 (0.9-1.2)", rotation angle = 0
  Source counts = 227.7 +/- 15.8
  Background counts = 21.6
  Rate = 0.005 +/- 0.0003
[Fri Oct 21 16:31:27 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:27 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:27 2011] Source does appear to be extended
[Fri Oct 21 16:31:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:32:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:32:01 2011] Initial guess for spatial extent in simple fitting = 1.04"
[Fri Oct 21 16:32:01 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.096
[Fri Oct 21 16:32:01 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 1.04"
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2.ximg exists
[Fri Oct 21 16:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2_1.ximg exists
[Fri Oct 21 16:32:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2.csv
[Fri Oct 21 16:32:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07356_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Fri Oct 21 16:32:02 2011] fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Oct 21 16:32:02 2011] Fit fullrun_ccd2_acisf07356_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Oct 21 16:32:25 2011] Spatial fit model total counts = 251.965000, observed total counts = 252.000000
[Fri Oct 21 16:32:25 2011] Offset between fit and detection position for source 1 = 0.069595 pixels
[Fri Oct 21 16:32:25 2011] 251.756900 total counts/ 30.809900 bgd. counts: snr = 39.805489
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.069595 pixels
  Position = (877.9, 890.4) = 2 26 17.27 61 56 6.8
  Extent = 1.0 (0.9-1.1)", rotation angle = 0
  Source counts = 220.9 +/- 15.9
  Background counts = 30.8
  Rate = 0.004 +/- 0.0003
[Fri Oct 21 16:32:25 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:25 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:25 2011] Source does appear to be extended
[Fri Oct 21 16:32:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:37:09 2011] Not overwriting source region fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.reg
[Fri Oct 21 16:37:09 2011] Extracting stamp from image fullrun_ccd2_acisf07356_pi14-548_cl_sm2.00.img.gz, (832, 844) - (924, 936)
[Fri Oct 21 16:37:09 2011] Writing fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1.gif
[Fri Oct 21 16:37:14 2011] ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.evt and ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Fri Oct 21 16:37:14 2011] Size of ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.evt.gz[events] = 249 counts
[Fri Oct 21 16:37:14 2011] Mean chipx,y = (269.98, 525.16)
[Fri Oct 21 16:37:14 2011] Mean tdetx,y = (3586.16, 3816.02)
[Fri Oct 21 16:37:14 2011] chipx,y range = (249.00-290.00, 507.00-548.00)
[Fri Oct 21 16:37:14 2011] Size of ../../acisf07356/products/events/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 29 counts
[Fri Oct 21 16:37:14 2011] ../../acisf07356/products/images/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.img and ../../acisf07356/products/images/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Fri Oct 21 16:37:14 2011] ../../acisf07356/products/spectra/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.pi and ../../acisf07356/products/spectra/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Fri Oct 21 16:37:17 2011] ../../acisf07356/products/lightcurves/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Fri Oct 21 16:39:34 2011] Keeping rmf generated by specextract
[Fri Oct 21 16:39:34 2011] 190.903
[Fri Oct 21 16:42:41 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:41 2011] Error reading totcts from fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1_src.pi.gz
[Fri Oct 21 16:42:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:42 2011] Using photon index=1.80, rate=0.00447, arf fullrun_ccd2_acisf07356_pi14-548_pass1_cl_src1.arf
[Fri Oct 21 16:42:42 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:42 2011] Updating source flux to 6.4e-14