[Fri Oct 21 16:29:21 2011] Detection parameters:
  Position = (977.4, 802.6) = 2 25 18.79 62 1 16.9
  Extent = 3.2" x 2.8", rotation angle = 112 degrees
  Source counts = 56.8 +/- 8.9
  Background counts = 23.2
  Rate = 0.001 +/- 0.0002

[Fri Oct 21 16:29:22 2011] Off-axis axis estimate = 8.70'
[Fri Oct 21 16:30:56 2011] Using EEF radius (= 3.35 ")to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:30:56 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 21 16:30:56 2011] Initial guess for spatial extent in simple fitting = 3.35"
[Fri Oct 21 16:30:56 2011] source mask rpix=6.8, npix_max = 213, mask sum = 225, frac = 1.054
[Fri Oct 21 16:30:56 2011] Giving source the simple spatial ID 19 for pass 0, mean size = 3.35"
[Fri Oct 21 16:30:57 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19.ximg exists
[Fri Oct 21 16:30:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19.csv
[Fri Oct 21 16:30:57 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19_1.ximg exists
[Fri Oct 21 16:30:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19.csv
[Fri Oct 21 16:30:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07356_pi14-548_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:30:58 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass0_tfrozen_src19.ximg exists
[Fri Oct 21 16:30:58 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass0_tfrozen_src19_1.ximg exists
[Fri Oct 21 16:30:58 2011] Fit fullrun_ccd0_acisf07356_pi14-548_cl_pass0_tfrozen_src19 appears to have run properly
[Fri Oct 21 16:31:15 2011] Spatial fit model total counts = 109.194000, observed total counts = 112.000000
[Fri Oct 21 16:31:15 2011] Offset between fit and detection position for source 30 = 2.338628 pixels
[Fri Oct 21 16:31:15 2011] 109.273300 total counts/ 70.724200 bgd. counts: snr = 4.583848
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 2.338628 pixels
  Position = (979.7, 802.9) = 2 25 18.66 62 1 16.8
  Extent = 1.4 (1.1-2.1)", rotation angle = 0
  Source counts = 38.5 +/- 10.5
  Background counts = 70.7
  Rate = 0.0008 +/- 0.0002
[Fri Oct 21 16:31:15 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:31:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:31:15 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:31:15 2011] Source does appear to be extended
[Fri Oct 21 16:31:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:31:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 21 16:31:57 2011] Initial guess for spatial extent in simple fitting = 1.43"
[Fri Oct 21 16:31:57 2011] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.056
[Fri Oct 21 16:31:57 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 1.43"
[Fri Oct 21 16:31:58 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17.ximg exists
[Fri Oct 21 16:31:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 16:31:59 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17_1.ximg exists
[Fri Oct 21 16:31:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17.csv
[Fri Oct 21 16:31:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07356_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 21 16:31:59 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Fri Oct 21 16:31:59 2011] fullrun_ccd0_acisf07356_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Oct 21 16:31:59 2011] Fit fullrun_ccd0_acisf07356_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Oct 21 16:32:14 2011] Spatial fit model total counts = 56.663200, observed total counts = 57.000000
[Fri Oct 21 16:32:14 2011] Offset between fit and detection position for source 30 = 0.572698 pixels
[Fri Oct 21 16:32:14 2011] 55.732400 total counts/ 22.337000 bgd. counts: snr = 7.066010
Spatial fit parameters:
  Offset between fit and detection position for source 30 = 0.572698 pixels
  Position = (980.1, 803.3) = 2 25 18.63 62 1 17.0
  Extent = 1.2 (0.9-1.7)", rotation angle = 0
  Source counts = 33.4 +/- 7.5
  Background counts = 22.3
  Rate = 0.0007 +/- 0.0002
[Fri Oct 21 16:32:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 21 16:32:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 21 16:32:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 21 16:32:14 2011] Source does appear to be extended
[Fri Oct 21 16:32:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 21 16:32:56 2011] Not overwriting source region fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.reg
[Fri Oct 21 16:32:56 2011] Extracting stamp from image fullrun_ccd0_acisf07356_pi14-548_cl_sm2.00.img.gz, (924, 748) - (1036, 859)
[Fri Oct 21 16:32:56 2011] Writing fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30.gif
[Fri Oct 21 16:33:43 2011] ../../acisf07356/products/events/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.evt and ../../acisf07356/products/events/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_bgd.evt exist, delete to re-create
[Fri Oct 21 16:33:43 2011] Size of ../../acisf07356/products/events/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.evt.gz[events] = 47 counts
[Fri Oct 21 16:33:43 2011] Mean chipx,y = (273.23, 396.30)
[Fri Oct 21 16:33:43 2011] Mean tdetx,y = (3457.30, 4858.77)
[Fri Oct 21 16:33:43 2011] chipx,y range = (252.00-295.00, 375.00-414.00)
[Fri Oct 21 16:33:43 2011] Size of ../../acisf07356/products/events/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_bgd.evt.gz[events] = 71 counts
[Fri Oct 21 16:33:43 2011] ../../acisf07356/products/images/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.img and ../../acisf07356/products/images/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_bgd.img exist, delete to re-create
[Fri Oct 21 16:33:43 2011] ../../acisf07356/products/spectra/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.pi and ../../acisf07356/products/spectra/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_bgd.pi exist, delete to re-create
[Fri Oct 21 16:33:43 2011] Not generating rmf since there are only 33 counts
[Fri Oct 21 16:33:46 2011] ../../acisf07356/products/lightcurves/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.lc and ../../acisf07356/products/lightcurves/fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_bgd.lc exist, delete to re-create
[Fri Oct 21 16:34:41 2011] 168.724
[Fri Oct 21 16:42:39 2011] Updating aperture counts using extracted products
[Fri Oct 21 16:42:39 2011] Error reading totcts from fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30_src.pi.gz
[Fri Oct 21 16:42:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 21 16:42:40 2011] Using photon index=1.80, rate=0.000676, arf fullrun_ccd0_acisf07356_pi14-548_pass1_cl_src30.arf
[Fri Oct 21 16:42:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 21 16:42:40 2011] Updating source flux to 1.1e-14
[Fri Oct 21 16:42:49 2011] Source 30 has fewer than 100.000000 counts, skipping spectral fitting