[Fri Oct 14 22:08:39 2011] Detection parameters:
  Position = (1114.5, 510.8) = 20 56 22.45 30 16 18.8
  Extent = 0.9" x 0.6", rotation angle = 116 degrees
  Source counts = 280.8 +/- 17.7
  Background counts = 32.2
  Rate = 0.006 +/- 0.0004

[Fri Oct 14 22:08:39 2011] Off-axis axis estimate = 3.13'
[Fri Oct 14 22:11:49 2011] Using EEF radius (= 0.61 ")to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:11:49 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:11:49 2011] Initial guess for spatial extent in simple fitting = 0.61"
[Fri Oct 14 22:11:49 2011] source mask rpix=1.2, npix_max = 12, mask sum = 12, frac = 0.997
[Fri Oct 14 22:11:49 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.61"
[Fri Oct 14 22:11:49 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1.ximg exists
[Fri Oct 14 22:11:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 22:11:49 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1_1.ximg exists
[Fri Oct 14 22:11:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1.csv
[Fri Oct 14 22:11:49 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00734_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:11:50 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Fri Oct 14 22:11:50 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Oct 14 22:11:50 2011] Fit fullrun_ccd3_acisf00734_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Oct 14 22:12:03 2011] Spatial fit model total counts = 327.000000, observed total counts = 327.000000
[Fri Oct 14 22:12:03 2011] Offset between fit and detection position for source 16 = 0.495224 pixels
[Fri Oct 14 22:12:03 2011] 329.171200 total counts/ 70.488200 bgd. counts: snr = 30.811276
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.495224 pixels
  Position = (1114.8, 511.1) = 20 56 22.46 30 16 18.7
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 258.7 +/- 18.1
  Background counts = 70.5
  Rate = 0.006 +/- 0.0004
[Fri Oct 14 22:12:03 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:12:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:12:03 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:12:03 2011] Source does appear to be extended
[Fri Oct 14 22:12:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:13:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 14 22:13:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Oct 14 22:13:29 2011] Initial guess for spatial extent in simple fitting = 0.62"
[Fri Oct 14 22:13:29 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.294
[Fri Oct 14 22:13:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.62"
[Fri Oct 14 22:13:31 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1.ximg exists
[Fri Oct 14 22:13:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 22:13:31 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1_1.ximg exists
[Fri Oct 14 22:13:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1.csv
[Fri Oct 14 22:13:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00734_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 14 22:13:36 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Fri Oct 14 22:13:36 2011] fullrun_ccd3_acisf00734_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Oct 14 22:13:36 2011] Fit fullrun_ccd3_acisf00734_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Oct 14 22:13:56 2011] Spatial fit model total counts = 332.350000, observed total counts = 333.000000
[Fri Oct 14 22:13:56 2011] Offset between fit and detection position for source 16 = 0.007850 pixels
[Fri Oct 14 22:13:56 2011] 333.962700 total counts/ 76.681700 bgd. counts: snr = 29.380680
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.007850 pixels
  Position = (1114.8, 511.1) = 20 56 22.46 30 16 18.7
  Extent = 0.6 (0.6-0.7)", rotation angle = 0
  Source counts = 257.3 +/- 18.3
  Background counts = 76.7
  Rate = 0.005 +/- 0.0004
[Fri Oct 14 22:13:56 2011] Vigneting correction estimate = 1.000000
[Fri Oct 14 22:13:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 14 22:13:56 2011] Assessing source extent using major axis lower bound
[Fri Oct 14 22:13:56 2011] Source does appear to be extended
[Fri Oct 14 22:13:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 14 22:16:28 2011] Not overwriting source region fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.reg
[Fri Oct 14 22:16:28 2011] Extracting stamp from image fullrun_ccd3_acisf00734_pi14-548_cl_sm2.00.img.gz, (1087, 483) - (1143, 539)
[Fri Oct 14 22:16:28 2011] Writing fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16.gif
[Fri Oct 14 22:16:29 2011] ../../acisf00734/products/events/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.evt and ../../acisf00734/products/events/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_bgd.evt exist, delete to re-create
[Fri Oct 14 22:16:30 2011] Size of ../../acisf00734/products/events/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.evt.gz[events] = 283 counts
[Fri Oct 14 22:16:30 2011] Mean chipx,y = (590.19, 969.02)
[Fri Oct 14 22:16:30 2011] Mean tdetx,y = (4162.98, 3651.19)
[Fri Oct 14 22:16:30 2011] chipx,y range = (570.00-609.00, 951.00-989.00)
[Fri Oct 14 22:16:30 2011] Size of ../../acisf00734/products/events/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_bgd.evt.gz[events] = 194 counts
[Fri Oct 14 22:16:30 2011] ../../acisf00734/products/images/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.img and ../../acisf00734/products/images/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_bgd.img exist, delete to re-create
[Fri Oct 14 22:16:30 2011] ../../acisf00734/products/spectra/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.pi and ../../acisf00734/products/spectra/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_bgd.pi exist, delete to re-create
[Fri Oct 14 22:16:33 2011] ../../acisf00734/products/lightcurves/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.lc and ../../acisf00734/products/lightcurves/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_bgd.lc exist, delete to re-create
[Fri Oct 14 22:17:12 2011] Keeping rmf generated by specextract
[Fri Oct 14 22:17:12 2011] 196.28
[Fri Oct 14 22:17:33 2011] Updating aperture counts using extracted products
[Fri Oct 14 22:17:33 2011] Error reading totcts from fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_src.pi.gz
[Fri Oct 14 22:17:33 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:17:33 2011] Using photon index=1.80, rate=0.0055, arf fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16.arf
[Fri Oct 14 22:17:33 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:17:33 2011] Updating source flux to 5.8e-14
[Fri Oct 14 22:18:12 2011] Reading fit data from acisf00734/analysis//spectral/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_pl.csv
[Fri Oct 14 22:18:12 2011] Spectral fit parameter nH value = 5.41084e+15
[Fri Oct 14 22:18:12 2011] Spectral fit parameter PhoIndex value = 1.71615
[Fri Oct 14 22:18:12 2011] Failed to get F(0.3-8.0) from acisf00734/analysis//spectral/fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16_pl.csv, possibly due to different flux energy range selected
[Fri Oct 14 22:18:12 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 14 22:18:12 2011] Using Nh = 5.4e+15, photon index=1.72, rate=0.0055, arf fullrun_ccd3_acisf00734_pi14-548_pass1_cl_src16.arf
[Fri Oct 14 22:18:12 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 14 22:18:12 2011] Updating source flux to 6.1e-14