[Wed Oct 26 00:12:43 2011] Detection parameters:
  Position = (57.0, 834.6) = 20 46 19.71 30 58 38.0
  Extent = 0.5" x 0.5", rotation angle = 101 degrees
  Source counts = 15.6 +/- 4.9
  Background counts = 8.4
  Rate = 0.0005 +/- 0.0002

[Wed Oct 26 00:12:43 2011] Off-axis axis estimate = 0.43'
[Wed Oct 26 00:17:11 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:17:11 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Wed Oct 26 00:17:11 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.880
[Wed Oct 26 00:17:11 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.40"
[Wed Oct 26 00:17:11 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 00:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 00:17:11 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 00:17:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 00:17:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00733_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:17:11 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 00:17:11 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 00:17:11 2011] Fit fullrun_ccd3_acisf00733_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 00:17:19 2011] Spatial fit model total counts = 48.592400, observed total counts = 48.000000
[Wed Oct 26 00:17:19 2011] Offset between fit and detection position for source 2 = 0.579279 pixels
[Wed Oct 26 00:17:19 2011] 48.716000 total counts/ 32.785700 bgd. counts: snr = 2.782158
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.579279 pixels
  Position = (57.5, 834.8) = 20 46 19.71 30 58 37.9
  Extent = 0.3 (0.1-0.4)", rotation angle = 0
  Source counts = 15.9 +/- 7.0
  Background counts = 32.8
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 00:17:19 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 00:17:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 00:17:19 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 00:17:19 2011] Source does appear to be extended
[Wed Oct 26 00:17:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 00:17:39 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 00:17:39 2011] Initial guess for spatial extent in simple fitting = 0.29"
[Wed Oct 26 00:17:39 2011] source mask rpix=0.6, npix_max = 4, mask sum = 6, frac = 1.257
[Wed Oct 26 00:17:39 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.29"
[Wed Oct 26 00:17:39 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 00:17:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 00:17:39 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 00:17:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 00:17:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00733_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 00:17:39 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 00:17:39 2011] fullrun_ccd3_acisf00733_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 00:17:39 2011] Fit fullrun_ccd3_acisf00733_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 00:17:45 2011] Spatial fit model total counts = 50.432200, observed total counts = 50.000000
[Wed Oct 26 00:17:45 2011] Offset between fit and detection position for source 2 = 0.003130 pixels
[Wed Oct 26 00:17:45 2011] 50.234800 total counts/ 34.399300 bgd. counts: snr = 2.699958
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.003130 pixels
  Position = (57.5, 834.8) = 20 46 19.71 30 58 37.9
  Extent = 0.3 (0.1-0.4)", rotation angle = 0
  Source counts = 15.8 +/- 7.1
  Background counts = 34.4
  Rate = 0.0005 +/- 0.0002
[Wed Oct 26 00:17:45 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 00:17:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 00:17:45 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 00:17:45 2011] Source does appear to be extended
[Wed Oct 26 00:17:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 00:18:49 2011] Not overwriting source region fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.reg
[Wed Oct 26 00:18:49 2011] Extracting stamp from image fullrun_ccd3_acisf00733_pi14-548_cl_sm2.00.img.gz, (44, 822) - (71, 848)
[Wed Oct 26 00:18:49 2011] Writing fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2.gif
[Wed Oct 26 00:18:54 2011] ../../acisf00733/products/events/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.evt and ../../acisf00733/products/events/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Oct 26 00:18:54 2011] Size of ../../acisf00733/products/events/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.evt.gz[events] = 18 counts
[Wed Oct 26 00:18:54 2011] Mean chipx,y = (1005.33, 959.33)
[Wed Oct 26 00:18:54 2011] Mean tdetx,y = (4172.67, 4066.33)
[Wed Oct 26 00:18:54 2011] chipx,y range = (997.00-1022.00, 944.00-978.00)
[Wed Oct 26 00:18:54 2011] Size of ../../acisf00733/products/events/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 23 counts
[Wed Oct 26 00:18:54 2011] ../../acisf00733/products/images/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.img and ../../acisf00733/products/images/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Oct 26 00:18:54 2011] ../../acisf00733/products/spectra/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.pi and ../../acisf00733/products/spectra/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Oct 26 00:18:54 2011] Not generating rmf since there are only 15 counts
[Wed Oct 26 00:18:57 2011] ../../acisf00733/products/lightcurves/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.lc and ../../acisf00733/products/lightcurves/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Oct 26 00:18:57 2011] 209.202
[Wed Oct 26 00:19:30 2011] Updating aperture counts using extracted products
[Wed Oct 26 00:19:30 2011] Error reading totcts from fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Oct 26 00:19:30 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 00:19:30 2011] Using photon index=1.80, rate=0.00051, arf fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2.arf
[Wed Oct 26 00:19:30 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 00:19:30 2011] Updating source flux to 5.3e-15
[Wed Oct 26 00:19:38 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Oct 26 00:19:39 2011] acisf00733/analysis//spectral/fullrun_ccd3_acisf00733_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete