[Wed Sep 21 21:17:33 2011] Detection parameters:
  Position = (483.7, 1320.7) = 23 25 13.27 -11 55 54.5
  Extent = 3.7" x 2.4", rotation angle = 153 degrees
  Source counts = 95.5 +/- 11.6
  Background counts = 38.5
  Rate = 0.002 +/- 0.0002

[Wed Sep 21 21:17:34 2011] Off-axis axis estimate = 10.46'
[Wed Sep 21 21:19:55 2011] Using EEF radius (= 4.85 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:19:55 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:19:55 2011] Initial guess for spatial extent in simple fitting = 4.85"
[Wed Sep 21 21:19:55 2011] source mask rpix=9.9, npix_max = 429, mask sum = 434, frac = 1.010
[Wed Sep 21 21:19:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.85"
[Wed Sep 21 21:19:55 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 21:19:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:19:55 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 21:19:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:19:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07329_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:19:56 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 21:19:56 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:19:56 2011] Fit fullrun_ccd6_acisf07329_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:20:06 2011] Spatial fit model total counts = 284.600000, observed total counts = 266.000000
[Wed Sep 21 21:20:06 2011] Offset between fit and detection position for source 1 = 6.071591 pixels
[Wed Sep 21 21:20:06 2011] 285.539000 total counts/ 118.369000 bgd. counts: snr = 15.365240
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 6.071591 pixels
  Position = (484.5, 1326.7) = 23 25 13.25 -11 55 51.8
  Extent = 4.9 (4.1-6.1)", rotation angle = 0
  Source counts = 167.2 +/- 16.9
  Background counts = 118.4
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 21:20:06 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:20:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:20:06 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:20:06 2011] Source does appear to be extended
[Wed Sep 21 21:20:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:20:06 2011] Source is confused with source 14
[Wed Sep 21 21:20:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:20:29 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:20:29 2011] Initial guess for spatial extent in simple fitting = 4.91"
[Wed Sep 21 21:20:29 2011] source mask rpix=10.0, npix_max = 440, mask sum = 394, frac = 0.895
[Wed Sep 21 21:20:29 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 4.91"
[Wed Sep 21 21:20:29 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 21:20:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:20:29 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 21:20:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:20:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd6_acisf07329_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:20:29 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 21:20:29 2011] fullrun_ccd6_acisf07329_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:20:29 2011] Fit fullrun_ccd6_acisf07329_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:20:36 2011] Spatial fit model total counts = 289.209000, observed total counts = 265.000000
[Wed Sep 21 21:20:36 2011] Offset between fit and detection position for source 1 = 0.186954 pixels
[Wed Sep 21 21:20:36 2011] 289.992000 total counts/ 118.005000 bgd. counts: snr = 15.832351
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.186954 pixels
  Position = (484.7, 1326.9) = 23 25 13.25 -11 55 51.7
  Extent = 5.0 (4.3-6.1)", rotation angle = 0
  Source counts = 172.0 +/- 17.0
  Background counts = 118.0
  Rate = 0.003 +/- 0.0003
[Wed Sep 21 21:20:36 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:20:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:20:36 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:20:36 2011] Source does appear to be extended
[Wed Sep 21 21:20:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:21:43 2011] Not overwriting source region fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 21:21:43 2011] Extracting stamp from image fullrun_ccd6_acisf07329_pi14-548_cl_sm2.00.img.gz, (255, 1098) - (714, 1399)
[Wed Sep 21 21:21:43 2011] Writing fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 21:21:44 2011] ../../acisf07329/products/events/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.evt and ../../acisf07329/products/events/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 21:21:44 2011] Size of ../../acisf07329/products/events/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.evt.gz[events] = 250 counts
[Wed Sep 21 21:21:44 2011] Mean chipx,y = (61.82, 998.90)
[Wed Sep 21 21:21:44 2011] Mean tdetx,y = (2936.82, 2700.90)
[Wed Sep 21 21:21:44 2011] chipx,y range = (11.00-115.00, 950.00-1022.00)
[Wed Sep 21 21:21:44 2011] Size of ../../acisf07329/products/events/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 444 counts
[Wed Sep 21 21:21:44 2011] ../../acisf07329/products/images/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.img and ../../acisf07329/products/images/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 21:21:44 2011] ../../acisf07329/products/spectra/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.pi and ../../acisf07329/products/spectra/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 21:21:48 2011] ../../acisf07329/products/lightcurves/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.lc and ../../acisf07329/products/lightcurves/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 21:22:18 2011] Keeping rmf generated by specextract
[Wed Sep 21 21:22:19 2011] 162.342
[Wed Sep 21 21:22:48 2011] Updating aperture counts using extracted products
[Wed Sep 21 21:22:48 2011] Error reading totcts from fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 21:22:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:22:48 2011] Using photon index=1.80, rate=0.00286, arf fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 21:22:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:22:48 2011] Updating source flux to 3.9e-14
[Wed Sep 21 21:22:57 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Wed Sep 21 21:23:02 2011] Reading fit data from acisf07329/analysis//spectral/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_pl.csv
[Wed Sep 21 21:23:02 2011] Spectral fit parameter nH value = 9.83675e+20
[Wed Sep 21 21:23:02 2011] Spectral fit parameter PhoIndex value = 1.53155
[Wed Sep 21 21:23:02 2011] Failed to get F(0.3-8.0) from acisf07329/analysis//spectral/fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 21:23:02 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:23:02 2011] Using Nh = 9.8e+20, photon index=1.53, rate=0.00286, arf fullrun_ccd6_acisf07329_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 21:23:02 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:23:02 2011] Updating source flux to 4.1e-14