[Wed Sep 21 21:17:30 2011] Detection parameters:
  Position = (925.3, 523.0) = 23 25 58.19 -12 5 56.9
  Extent = 3.8" x 3.6", rotation angle = 133 degrees
  Source counts = 150.8 +/- 14.3
  Background counts = 53.2
  Rate = 0.003 +/- 0.0002

[Wed Sep 21 21:17:32 2011] Off-axis axis estimate = 9.93'
[Wed Sep 21 21:19:53 2011] Using EEF radius (= 4.36 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:19:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:19:53 2011] Initial guess for spatial extent in simple fitting = 4.36"
[Wed Sep 21 21:19:53 2011] source mask rpix=8.9, npix_max = 351, mask sum = 342, frac = 0.974
[Wed Sep 21 21:19:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 4.36"
[Wed Sep 21 21:19:54 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 21:19:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:19:54 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 21:19:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 21:19:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07329_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:19:54 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 21:19:54 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:19:54 2011] Fit fullrun_ccd3_acisf07329_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:20:05 2011] Spatial fit model total counts = 255.650000, observed total counts = 255.000000
[Wed Sep 21 21:20:05 2011] Offset between fit and detection position for source 4 = 0.483412 pixels
[Wed Sep 21 21:20:05 2011] 254.575000 total counts/ 112.429000 bgd. counts: snr = 13.405884
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.483412 pixels
  Position = (925.5, 522.5) = 23 25 58.20 -12 5 57.4
  Extent = 3.4 (2.8-3.9)", rotation angle = 0
  Source counts = 142.1 +/- 16.0
  Background counts = 112.4
  Rate = 0.002 +/- 0.0003
[Wed Sep 21 21:20:05 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:20:05 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:20:05 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:20:05 2011] Source does appear to be extended
[Wed Sep 21 21:20:05 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:20:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 21:20:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 21:20:27 2011] Initial guess for spatial extent in simple fitting = 3.38"
[Wed Sep 21 21:20:27 2011] source mask rpix=6.9, npix_max = 217, mask sum = 225, frac = 1.035
[Wed Sep 21 21:20:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.38"
[Wed Sep 21 21:20:28 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 21:20:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:20:28 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 21:20:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 21:20:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07329_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 21:20:28 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 21:20:28 2011] fullrun_ccd3_acisf07329_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 21:20:28 2011] Fit fullrun_ccd3_acisf07329_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 21:20:35 2011] Spatial fit model total counts = 218.395000, observed total counts = 218.000000
[Wed Sep 21 21:20:35 2011] Offset between fit and detection position for source 4 = 0.222294 pixels
[Wed Sep 21 21:20:35 2011] 218.236000 total counts/ 89.200000 bgd. counts: snr = 13.662446
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.222294 pixels
  Position = (925.4, 522.3) = 23 25 58.21 -12 5 57.5
  Extent = 3.1 (2.4-3.7)", rotation angle = 0
  Source counts = 129.0 +/- 14.8
  Background counts = 89.2
  Rate = 0.002 +/- 0.0002
[Wed Sep 21 21:20:35 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 21:20:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 21:20:35 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 21:20:35 2011] Source does appear to be extended
[Wed Sep 21 21:20:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 21:21:16 2011] Not overwriting source region fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 21 21:21:16 2011] Extracting stamp from image fullrun_ccd3_acisf07329_pi14-548_cl_sm2.00.img.gz, (785, 382) - (1066, 663)
[Wed Sep 21 21:21:16 2011] Writing fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4.gif
[Wed Sep 21 21:21:17 2011] ../../acisf07329/products/events/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.evt and ../../acisf07329/products/events/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 21 21:21:17 2011] Size of ../../acisf07329/products/events/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.evt.gz[events] = 190 counts
[Wed Sep 21 21:21:17 2011] Mean chipx,y = (226.93, 466.09)
[Wed Sep 21 21:21:17 2011] Mean tdetx,y = (4665.91, 3287.93)
[Wed Sep 21 21:21:17 2011] chipx,y range = (190.00-260.00, 436.00-503.00)
[Wed Sep 21 21:21:17 2011] Size of ../../acisf07329/products/events/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 413 counts
[Wed Sep 21 21:21:17 2011] ../../acisf07329/products/images/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.img and ../../acisf07329/products/images/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 21 21:21:17 2011] ../../acisf07329/products/spectra/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.pi and ../../acisf07329/products/spectra/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Sep 21 21:21:20 2011] ../../acisf07329/products/lightcurves/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.lc and ../../acisf07329/products/lightcurves/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 21 21:21:39 2011] Keeping rmf generated by specextract
[Wed Sep 21 21:21:39 2011] 162.761
[Wed Sep 21 21:22:48 2011] Updating aperture counts using extracted products
[Wed Sep 21 21:22:48 2011] Error reading totcts from fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 21 21:22:48 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:22:48 2011] Using photon index=1.80, rate=0.00215, arf fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4.arf
[Wed Sep 21 21:22:48 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:22:48 2011] Updating source flux to 3e-14
[Wed Sep 21 21:22:56 2011] Reading fit data from acisf07329/analysis//spectral/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_pl.csv
[Wed Sep 21 21:22:56 2011] Spectral fit parameter nH value = 2.65955e+15
[Wed Sep 21 21:22:56 2011] Spectral fit parameter PhoIndex value = 1.77537
[Wed Sep 21 21:22:56 2011] Failed to get F(0.3-8.0) from acisf07329/analysis//spectral/fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 21:22:56 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 21:22:56 2011] Using Nh = 2.7e+15, photon index=1.78, rate=0.00215, arf fullrun_ccd3_acisf07329_pi14-548_pass1_cl_src4.arf
[Wed Sep 21 21:22:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 21:22:56 2011] Updating source flux to 3.1e-14