[Sat Oct 22 13:50:21 2011] Detection parameters:
  Position = (775.8, 668.8) = 0 53 53.46 -72 31 9.3
  Extent = 0.5" x 0.5", rotation angle = 97 degrees
  Source counts = 14.7 +/- 4.0
  Background counts = 1.3
  Rate = 0.0003 +/- 8e-05

[Sat Oct 22 13:50:23 2011] Off-axis axis estimate = 4.91'
[Sat Oct 22 13:51:27 2011] Using EEF radius (= 1.14 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:51:27 2011] Initial guess for spatial extent in simple fitting = 1.14"
[Sat Oct 22 13:51:27 2011] source mask rpix=2.3, npix_max = 31, mask sum = 35, frac = 1.098
[Sat Oct 22 13:51:27 2011] Giving source the simple spatial ID 15 for pass 0, mean size = 1.14"
[Sat Oct 22 13:51:27 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15.ximg exists
[Sat Oct 22 13:51:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15.csv
[Sat Oct 22 13:51:27 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15_1.ximg exists
[Sat Oct 22 13:51:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15.csv
[Sat Oct 22 13:51:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:51:28 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15.ximg exists
[Sat Oct 22 13:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15.csv
[Sat Oct 22 13:51:28 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15_1.ximg exists
[Sat Oct 22 13:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15.csv
[Sat Oct 22 13:51:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:51:43 2011] Spatial fit model total counts = 16.367300, observed total counts = 18.000000
[Sat Oct 22 13:51:43 2011] Offset between fit and detection position for source 2 = 0.999210 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.999210 pixels
  Position = (776.6, 669.3) = 0 53 53.42 -72 31 9.3
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 15.7 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Sat Oct 22 13:51:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:51:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:51:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:51:43 2011] Source does appear to be extended
[Sat Oct 22 13:51:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 13:52:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:52:09 2011] Initial guess for spatial extent in simple fitting = 0.80"
[Sat Oct 22 13:52:09 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.110
[Sat Oct 22 13:52:09 2011] Giving source the simple spatial ID 15 for pass 1, mean size = 0.80"
[Sat Oct 22 13:52:10 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15.ximg exists
[Sat Oct 22 13:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15.csv
[Sat Oct 22 13:52:10 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15_1.ximg exists
[Sat Oct 22 13:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15.csv
[Sat Oct 22 13:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:52:11 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src15.ximg exists
[Sat Oct 22 13:52:11 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Oct 22 13:52:11 2011] Fit fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Oct 22 13:52:26 2011] Spatial fit model total counts = 16.146400, observed total counts = 17.000000
[Sat Oct 22 13:52:26 2011] Offset between fit and detection position for source 2 = 0.083516 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.083516 pixels
  Position = (776.6, 669.4) = 0 53 53.42 -72 31 9.3
  Extent = 0.8 (0.6-1.0)", rotation angle = 0
  Source counts = 15.8 +/- 4.0
  Background counts = 0.0
  Rate = 0.0003 +/- 8e-05
[Sat Oct 22 13:52:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:52:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:52:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:52:26 2011] Source does appear to be extended
[Sat Oct 22 13:52:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:00:44 2011] Not overwriting source region fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.reg
[Sat Oct 22 14:00:44 2011] Extracting stamp from image fullrun_ccd3_acisf07327_pi14-548_cl_sm2.00.img.gz, (740, 633) - (813, 706)
[Sat Oct 22 14:00:44 2011] Writing fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2.gif
[Sat Oct 22 14:02:32 2011] ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.evt and ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Sat Oct 22 14:02:32 2011] Size of ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.evt.gz[events] = 17 counts
[Sat Oct 22 14:02:32 2011] Mean chipx,y = (490.71, 642.82)
[Sat Oct 22 14:02:32 2011] Mean tdetx,y = (4489.18, 3551.71)
[Sat Oct 22 14:02:32 2011] chipx,y range = (472.00-506.00, 623.00-658.00)
[Sat Oct 22 14:02:32 2011] Size of ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 12 counts
[Sat Oct 22 14:02:32 2011] ../../acisf07327/products/images/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.img and ../../acisf07327/products/images/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Sat Oct 22 14:02:32 2011] Not generating rmf since there are only 15 counts
[Sat Oct 22 14:02:32 2011] arf not found, will run specextract
[Sat Oct 22 14:02:33 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_bkg.pi not found
[Sat Oct 22 14:02:33 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2.warf not found
[Sat Oct 22 14:02:33 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2.wrmf not found
[Sat Oct 22 14:02:33 2011] Removal of ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2.soff failed
[Sat Oct 22 14:02:33 2011] Failed to rename ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_grp.pi to ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.pi
[Sat Oct 22 14:02:39 2011] ../../acisf07327/products/lightcurves/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.lc and ../../acisf07327/products/lightcurves/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Sat Oct 22 14:05:26 2011] No arf file found
[Sat Oct 22 14:05:39 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:05:39 2011] Error reading totcts from fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_src.pi
[Sat Oct 22 14:05:39 2011] No arf file for this source, not re-computing flux
[Sat Oct 22 14:05:46 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 14:05:47 2011] acisf07327/analysis//spectral/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete