[Sat Oct 22 13:50:22 2011] Detection parameters:
  Position = (906.1, 1110.2) = 0 53 39.20 -72 27 32.2
  Extent = 0.5" x 0.5", rotation angle = 78 degrees
  Source counts = 11.4 +/- 3.5
  Background counts = 0.6
  Rate = 0.0002 +/- 7e-05

[Sat Oct 22 13:50:23 2011] Off-axis axis estimate = 1.15'
[Sat Oct 22 13:51:27 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:51:27 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Sat Oct 22 13:51:27 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.923
[Sat Oct 22 13:51:27 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 0.38"
[Sat Oct 22 13:51:27 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22.ximg exists
[Sat Oct 22 13:51:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22.csv
[Sat Oct 22 13:51:27 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22_1.ximg exists
[Sat Oct 22 13:51:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22.csv
[Sat Oct 22 13:51:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:51:28 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22.ximg exists
[Sat Oct 22 13:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22.csv
[Sat Oct 22 13:51:28 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22_1.ximg exists
[Sat Oct 22 13:51:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22.csv
[Sat Oct 22 13:51:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:51:43 2011] Spatial fit model total counts = 14.980700, observed total counts = 16.000000
[Sat Oct 22 13:51:43 2011] Offset between fit and detection position for source 14 = 0.677199 pixels
[Sat Oct 22 13:51:43 2011] 15.627580 total counts/ 4.498780 bgd. counts: snr = 5.246878
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.677199 pixels
  Position = (906.6, 1110.7) = 0 53 39.20 -72 27 32.2
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 11.1 +/- 4.0
  Background counts = 4.5
  Rate = 0.0002 +/- 8e-05
[Sat Oct 22 13:51:43 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:51:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:51:43 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:51:43 2011] Source does appear to be extended
[Sat Oct 22 13:51:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 13:52:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Oct 22 13:52:09 2011] Initial guess for spatial extent in simple fitting = 0.30"
[Sat Oct 22 13:52:09 2011] source mask rpix=0.6, npix_max = 4, mask sum = 6, frac = 1.205
[Sat Oct 22 13:52:09 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 0.30"
[Sat Oct 22 13:52:10 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22.ximg exists
[Sat Oct 22 13:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22.csv
[Sat Oct 22 13:52:10 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22_1.ximg exists
[Sat Oct 22 13:52:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22.csv
[Sat Oct 22 13:52:10 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07327_pi14-548_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Oct 22 13:52:11 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src22.ximg exists
[Sat Oct 22 13:52:11 2011] fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src22_1.ximg exists
[Sat Oct 22 13:52:11 2011] Fit fullrun_ccd3_acisf07327_pi14-548_cl_pass1_tfrozen_src22 appears to have run properly
[Sat Oct 22 13:52:26 2011] Spatial fit model total counts = 16.409500, observed total counts = 16.000000
[Sat Oct 22 13:52:26 2011] Offset between fit and detection position for source 14 = 0.076871 pixels
[Sat Oct 22 13:52:26 2011] 16.988020 total counts/ 4.153320 bgd. counts: snr = 6.297788
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.076871 pixels
  Position = (906.6, 1110.8) = 0 53 39.20 -72 27 32.2
  Extent = 0.3 (0.2-0.4)", rotation angle = 0
  Source counts = 12.8 +/- 4.1
  Background counts = 4.2
  Rate = 0.0003 +/- 9e-05
[Sat Oct 22 13:52:26 2011] Vigneting correction estimate = 1.000000
[Sat Oct 22 13:52:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Oct 22 13:52:26 2011] Assessing source extent using major axis lower bound
[Sat Oct 22 13:52:26 2011] Source does appear to be extended
[Sat Oct 22 13:52:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Oct 22 14:00:44 2011] Not overwriting source region fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.reg
[Sat Oct 22 14:00:44 2011] Extracting stamp from image fullrun_ccd3_acisf07327_pi14-548_cl_sm2.00.img.gz, (893, 1098) - (920, 1124)
[Sat Oct 22 14:00:44 2011] Writing fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14.gif
[Sat Oct 22 14:03:23 2011] ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.evt and ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Sat Oct 22 14:03:23 2011] Size of ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.evt.gz[events] = 12 counts
[Sat Oct 22 14:03:23 2011] Mean chipx,y = (865.75, 907.25)
[Sat Oct 22 14:03:23 2011] Mean tdetx,y = (4224.75, 3926.75)
[Sat Oct 22 14:03:23 2011] chipx,y range = (850.00-884.00, 889.00-922.00)
[Sat Oct 22 14:03:23 2011] Size of ../../acisf07327/products/events/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 4 counts
[Sat Oct 22 14:03:23 2011] ../../acisf07327/products/images/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.img and ../../acisf07327/products/images/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Sat Oct 22 14:03:23 2011] Not generating rmf since there are only 12 counts
[Sat Oct 22 14:03:23 2011] arf not found, will run specextract
[Sat Oct 22 14:03:25 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_bkg.pi not found
[Sat Oct 22 14:03:25 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14.warf not found
[Sat Oct 22 14:03:25 2011] ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14.wrmf not found
[Sat Oct 22 14:03:25 2011] Removal of ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14.soff failed
[Sat Oct 22 14:03:25 2011] Failed to rename ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_grp.pi to ../../acisf07327/products/spectra/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.pi
[Sat Oct 22 14:03:30 2011] ../../acisf07327/products/lightcurves/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.lc and ../../acisf07327/products/lightcurves/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Sat Oct 22 14:05:26 2011] No arf file found
[Sat Oct 22 14:05:39 2011] Updating aperture counts using extracted products
[Sat Oct 22 14:05:39 2011] Error reading totcts from fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_src.pi
[Sat Oct 22 14:05:39 2011] No arf file for this source, not re-computing flux
[Sat Oct 22 14:05:46 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Oct 22 14:05:47 2011] acisf07327/analysis//spectral/fullrun_ccd3_acisf07327_pi14-548_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete