[Sun Oct  2 16:07:17 2011] Detection parameters:
  Position = (800.9, 630.5) = 17 33 11.20 43 52 53.1
  Extent = 0.8" x 0.5", rotation angle = 30 degrees
  Source counts = 11.2 +/- 3.9
  Background counts = 3.8
  Rate = 0.0003 +/- 0.0001

[Sun Oct  2 16:07:18 2011] Off-axis axis estimate = 6.81'
[Sun Oct  2 16:08:18 2011] Using EEF radius (= 2.07 ")to estimate initial spatial extent for simple fitting
[Sun Oct  2 16:08:18 2011] Initial guess for spatial extent in simple fitting = 2.07"
[Sun Oct  2 16:08:18 2011] source mask rpix=4.2, npix_max = 88, mask sum = 90, frac = 1.015
[Sun Oct  2 16:08:18 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 2.07"
[Sun Oct  2 16:08:18 2011] fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10.ximg exists
[Sun Oct  2 16:08:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 16:08:18 2011] fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10_1.ximg exists
[Sun Oct  2 16:08:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10.csv
[Sun Oct  2 16:08:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07321_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  2 16:08:19 2011] fullrun_ccd0_acisf07321_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Sun Oct  2 16:08:19 2011] fullrun_ccd0_acisf07321_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Oct  2 16:08:19 2011] Fit fullrun_ccd0_acisf07321_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Oct  2 16:08:28 2011] Spatial fit model total counts = 20.109900, observed total counts = 21.000000
[Sun Oct  2 16:08:28 2011] Offset between fit and detection position for source 16 = 0.096738 pixels
[Sun Oct  2 16:08:28 2011] 21.647810 total counts/ 16.711500 bgd. counts: snr = 1.207521
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.096738 pixels
  Position = (800.9, 630.6) = 17 33 11.22 43 52 52.9
  Extent = 0.7 (0.5-1.0)", rotation angle = 0
  Source counts = 4.9 +/- 4.7
  Background counts = 16.7
  Rate = 0.0001 +/- 0.0001
  Deleting source due to low Poisson probability