[Thu Sep 22 21:27:40 2011] Detection parameters:
  Position = (267.0, 1150.3) = 15 3 4.30 -41 44 46.6
  Extent = 4.1" x 3.2", rotation angle = 8 degrees
  Source counts = 148.6 +/- 16.7
  Background counts = 130.4
  Rate = 0.002 +/- 0.0002

[Thu Sep 22 21:27:41 2011] Off-axis axis estimate = 10.95'
[Thu Sep 22 21:33:35 2011] Using EEF radius (= 5.33 ")to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:33:35 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 21:33:35 2011] Initial guess for spatial extent in simple fitting = 5.33"
[Thu Sep 22 21:33:35 2011] source mask rpix=10.8, npix_max = 514, mask sum = 506, frac = 0.983
[Thu Sep 22 21:33:35 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 5.33"
[Thu Sep 22 21:33:36 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 22 21:33:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 21:33:36 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 22 21:33:36 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1.csv
[Thu Sep 22 21:33:36 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00732_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:33:36 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 22 21:33:36 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 22 21:33:36 2011] Fit fullrun_ccd3_acisf00732_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 22 21:34:13 2011] Spatial fit model total counts = 639.786000, observed total counts = 590.000000
[Thu Sep 22 21:34:13 2011] Offset between fit and detection position for source 1 = 1.863592 pixels
[Thu Sep 22 21:34:13 2011] 639.122000 total counts/ 479.808000 bgd. counts: snr = 7.273111
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.863592 pixels
  Position = (266.1, 1152.0) = 15 3 4.36 -41 44 46.0
  Extent = 3.8 (2.9-4.5)", rotation angle = 0
  Source counts = 159.3 +/- 25.3
  Background counts = 479.8
  Rate = 0.002 +/- 0.0004
[Thu Sep 22 21:34:13 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:34:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:34:13 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:34:13 2011] Source does appear to be extended
[Thu Sep 22 21:34:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 21:35:22 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 22 21:35:22 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 22 21:35:22 2011] Initial guess for spatial extent in simple fitting = 3.78"
[Thu Sep 22 21:35:22 2011] source mask rpix=7.7, npix_max = 268, mask sum = 256, frac = 0.955
[Thu Sep 22 21:35:22 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 3.78"
[Thu Sep 22 21:35:22 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 22 21:35:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 21:35:23 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 22 21:35:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1.csv
[Thu Sep 22 21:35:23 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf00732_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 22 21:35:23 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 22 21:35:23 2011] fullrun_ccd3_acisf00732_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 22 21:35:23 2011] Fit fullrun_ccd3_acisf00732_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 22 21:36:02 2011] Spatial fit model total counts = 396.618000, observed total counts = 393.000000
[Thu Sep 22 21:36:02 2011] Offset between fit and detection position for source 1 = 0.324650 pixels
[Thu Sep 22 21:36:02 2011] 395.421000 total counts/ 238.466000 bgd. counts: snr = 10.163936
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.324650 pixels
  Position = (266.2, 1152.3) = 15 3 4.36 -41 44 45.9
  Extent = 3.7 (2.8-4.7)", rotation angle = 0
  Source counts = 157.0 +/- 19.9
  Background counts = 238.5
  Rate = 0.002 +/- 0.0003
[Thu Sep 22 21:36:02 2011] Vigneting correction estimate = 1.000000
[Thu Sep 22 21:36:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 22 21:36:02 2011] Assessing source extent using major axis lower bound
[Thu Sep 22 21:36:02 2011] Source does appear to be extended
[Thu Sep 22 21:36:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 22 21:37:30 2011] Not overwriting source region fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.reg
[Thu Sep 22 21:37:30 2011] Extracting stamp from image fullrun_ccd3_acisf00732_pi14-548_cl_sm2.00.img.gz, (97, 983) - (436, 1203)
[Thu Sep 22 21:37:30 2011] Writing fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1.gif
[Thu Sep 22 21:37:30 2011] ../../acisf00732/products/events/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.evt and ../../acisf00732/products/events/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Thu Sep 22 21:37:30 2011] Size of ../../acisf00732/products/events/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.evt.gz[events] = 342 counts
[Thu Sep 22 21:37:30 2011] Mean chipx,y = (82.94, 30.25)
[Thu Sep 22 21:37:30 2011] Mean tdetx,y = (5101.75, 3143.94)
[Thu Sep 22 21:37:30 2011] chipx,y range = (41.00-125.00, 5.00-68.00)
[Thu Sep 22 21:37:30 2011] Size of ../../acisf00732/products/events/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 843 counts
[Thu Sep 22 21:37:30 2011] ../../acisf00732/products/images/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.img and ../../acisf00732/products/images/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Thu Sep 22 21:37:30 2011] ../../acisf00732/products/spectra/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.pi and ../../acisf00732/products/spectra/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Thu Sep 22 21:37:33 2011] ../../acisf00732/products/lightcurves/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.lc and ../../acisf00732/products/lightcurves/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Thu Sep 22 21:37:40 2011] Keeping rmf generated by specextract
[Thu Sep 22 21:37:40 2011] 161.554
[Thu Sep 22 21:48:40 2011] Updating aperture counts using extracted products
[Thu Sep 22 21:48:40 2011] Error reading totcts from fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_src.pi.gz
[Thu Sep 22 21:48:40 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 21:48:40 2011] Using photon index=1.80, rate=0.00231, arf fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 21:48:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 21:48:40 2011] Updating source flux to 2.9e-14
[Thu Sep 22 21:49:46 2011] Reading fit data from acisf00732/analysis//spectral/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_pl.csv
[Thu Sep 22 21:49:46 2011] Spectral fit parameter nH value = 1.98117e+13
[Thu Sep 22 21:49:46 2011] Spectral fit parameter PhoIndex value = 2.09477
[Thu Sep 22 21:49:46 2011] Failed to get F(0.3-8.0) from acisf00732/analysis//spectral/fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Sep 22 21:49:46 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 22 21:49:46 2011] Using Nh = 2e+13, photon index=2.09, rate=0.00231, arf fullrun_ccd3_acisf00732_pi14-548_pass1_cl_src1.arf
[Thu Sep 22 21:49:46 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 22 21:49:46 2011] Updating source flux to 3e-14