[Wed Oct 26 14:39:38 2011] Detection parameters:
  Position = (743.8, 687.2) = 2 5 33.61 64 49 34.0
  Extent = 1.1" x 0.7", rotation angle = 55 degrees
  Source counts = 82.7 +/- 13.0
  Background counts = 85.3
  Rate = 0.002 +/- 0.0003

[Wed Oct 26 14:39:40 2011] Off-axis axis estimate = 0.75'
[Wed Oct 26 14:40:24 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:40:24 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Oct 26 14:40:24 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.611
[Wed Oct 26 14:40:24 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 0.38"
[Wed Oct 26 14:40:25 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3.ximg exists
[Wed Oct 26 14:40:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 14:40:25 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Oct 26 14:40:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3.csv
[Wed Oct 26 14:40:25 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00728_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:40:26 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct 26 14:40:26 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct 26 14:40:26 2011] Fit fullrun_ccd7_acisf00728_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct 26 14:40:34 2011] Spatial fit model total counts = 512.537000, observed total counts = 513.000000
[Wed Oct 26 14:40:34 2011] Offset between fit and detection position for source 10 = 0.348598 pixels
[Wed Oct 26 14:40:34 2011] 504.787800 total counts/ 462.045000 bgd. counts: snr = 1.988478
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.348598 pixels
  Position = (743.9, 687.5) = 2 5 33.64 64 49 33.9
  Extent = 0.8 (0.2-1.5)", rotation angle = 0
  Source counts = 42.7 +/- 22.5
  Background counts = 462.0
  Rate = 0.0009 +/- 0.0004
[Wed Oct 26 14:40:34 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 14:40:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 14:40:34 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 14:40:34 2011] Source does appear to be extended
[Wed Oct 26 14:40:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 14:40:34 2011] Source is confused with source 11
[Wed Oct 26 14:40:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct 26 14:40:43 2011] Initial guess for spatial extent in simple fitting = 0.83"
[Wed Oct 26 14:40:43 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.043
[Wed Oct 26 14:40:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 0.83"
[Wed Oct 26 14:40:43 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3.ximg exists
[Wed Oct 26 14:40:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 14:40:43 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Oct 26 14:40:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3.csv
[Wed Oct 26 14:40:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd7_acisf00728_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct 26 14:40:43 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct 26 14:40:43 2011] fullrun_ccd7_acisf00728_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct 26 14:40:43 2011] Fit fullrun_ccd7_acisf00728_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct 26 14:40:52 2011] Spatial fit model total counts = 522.047000, observed total counts = 523.000000
[Wed Oct 26 14:40:52 2011] Offset between fit and detection position for source 10 = 0.146381 pixels
[Wed Oct 26 14:40:52 2011] 517.991000 total counts/ 478.031000 bgd. counts: snr = 1.827669
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.146381 pixels
  Position = (743.8, 687.4) = 2 5 33.65 64 49 33.8
  Extent = 0.8 (0.2-1.5)", rotation angle = 0
  Source counts = 40.0 +/- 22.8
  Background counts = 478.0
  Rate = 0.0008 +/- 0.0005
[Wed Oct 26 14:40:52 2011] Vigneting correction estimate = 1.000000
[Wed Oct 26 14:40:52 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct 26 14:40:52 2011] Assessing source extent using major axis lower bound
[Wed Oct 26 14:40:52 2011] Source does appear to be extended
[Wed Oct 26 14:40:52 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct 26 14:41:36 2011] Not overwriting source region fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.reg
[Wed Oct 26 14:41:36 2011] Extracting stamp from image fullrun_ccd7_acisf00728_pi14-548_cl_sm2.00.img.gz, (709, 652) - (779, 722)
[Wed Oct 26 14:41:36 2011] Writing fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10.gif
[Wed Oct 26 14:41:43 2011] ../../acisf00728/products/events/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.evt and ../../acisf00728/products/events/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Oct 26 14:41:43 2011] Size of ../../acisf00728/products/events/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.evt.gz[events] = 263 counts
[Wed Oct 26 14:41:43 2011] Mean chipx,y = (281.20, 456.24)
[Wed Oct 26 14:41:43 2011] Mean tdetx,y = (4198.20, 2158.24)
[Wed Oct 26 14:41:43 2011] chipx,y range = (260.00-303.00, 432.00-478.00)
[Wed Oct 26 14:41:43 2011] Size of ../../acisf00728/products/events/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_bgd.evt.gz[events] = 5 counts
[Wed Oct 26 14:41:43 2011] ../../acisf00728/products/images/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.img and ../../acisf00728/products/images/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Oct 26 14:41:43 2011] ../../acisf00728/products/spectra/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.pi and ../../acisf00728/products/spectra/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Oct 26 14:41:43 2011] Not generating rmf since there are only 39 counts
[Wed Oct 26 14:41:46 2011] ../../acisf00728/products/lightcurves/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.lc and ../../acisf00728/products/lightcurves/fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Oct 26 14:42:08 2011] 248.409
[Wed Oct 26 14:42:09 2011] Updating aperture counts using extracted products
[Wed Oct 26 14:42:09 2011] Error reading totcts from fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10_src.pi.gz
[Wed Oct 26 14:42:09 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct 26 14:42:09 2011] Using photon index=1.80, rate=0.0008, arf fullrun_ccd7_acisf00728_pi14-548_pass1_cl_src10.arf
[Wed Oct 26 14:42:09 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct 26 14:42:09 2011] Updating source flux to 7.5e-15
[Wed Oct 26 14:42:19 2011] Flag c found in src. 10 procflags, skipping spectral fitting
[Wed Oct 26 14:42:19 2011] Source 10 has fewer than 100.000000 counts, skipping spectral fitting