[Sun Oct 30 17:40:01 2011] Detection parameters:
  Position = (1219.4, 719.5) = 20 16 0.97 -70 43 10.3
  Extent = 0.5" x 0.5", rotation angle = 44 degrees
  Source counts = 23.6 +/- 5.0
  Background counts = 1.4
  Rate = 0.0007 +/- 0.0001

[Sun Oct 30 17:40:02 2011] Off-axis axis estimate = 5.44'
[Sun Oct 30 17:40:55 2011] Using EEF radius (= 1.37 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 17:40:55 2011] Initial guess for spatial extent in simple fitting = 1.37"
[Sun Oct 30 17:40:55 2011] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.140
[Sun Oct 30 17:40:55 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 1.37"
[Sun Oct 30 17:40:56 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12.ximg exists
[Sun Oct 30 17:40:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 17:40:56 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12_1.ximg exists
[Sun Oct 30 17:40:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12.csv
[Sun Oct 30 17:40:56 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07248_pi14-548_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 17:40:56 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass0_tfrozen_src12.ximg exists
[Sun Oct 30 17:40:56 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Oct 30 17:40:56 2011] Fit fullrun_ccd1_acisf07248_pi14-548_cl_pass0_tfrozen_src12 appears to have run properly
[Sun Oct 30 17:41:07 2011] Spatial fit model total counts = 24.875000, observed total counts = 26.000000
[Sun Oct 30 17:41:07 2011] Offset between fit and detection position for source 12 = 0.757005 pixels
[Sun Oct 30 17:41:07 2011] 25.393130 total counts/ 7.262430 bgd. counts: snr = 6.727808
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.757005 pixels
  Position = (1220.1, 719.8) = 20 16 0.95 -70 43 10.4
  Extent = 0.9 (0.5-1.5)", rotation angle = 0
  Source counts = 18.1 +/- 5.0
  Background counts = 7.3
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 17:41:07 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 17:41:07 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 17:41:07 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 17:41:07 2011] Source does appear to be extended
[Sun Oct 30 17:41:07 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 17:41:29 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 17:41:29 2011] Initial guess for spatial extent in simple fitting = 0.88"
[Sun Oct 30 17:41:29 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.760
[Sun Oct 30 17:41:29 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 0.88"
[Sun Oct 30 17:41:30 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12.ximg exists
[Sun Oct 30 17:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 17:41:30 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12_1.ximg exists
[Sun Oct 30 17:41:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12.csv
[Sun Oct 30 17:41:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07248_pi14-548_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 17:41:31 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass1_tfrozen_src12.ximg exists
[Sun Oct 30 17:41:31 2011] fullrun_ccd1_acisf07248_pi14-548_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Oct 30 17:41:31 2011] Fit fullrun_ccd1_acisf07248_pi14-548_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Oct 30 17:41:39 2011] Spatial fit model total counts = 25.951300, observed total counts = 27.000000
[Sun Oct 30 17:41:39 2011] Offset between fit and detection position for source 12 = 0.094705 pixels
[Sun Oct 30 17:41:39 2011] 26.329700 total counts/ 8.098500 bgd. counts: snr = 6.406384
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.094705 pixels
  Position = (1220.2, 719.9) = 20 16 0.94 -70 43 10.4
  Extent = 0.8 (0.5-1.5)", rotation angle = 0
  Source counts = 18.2 +/- 5.1
  Background counts = 8.1
  Rate = 0.0005 +/- 0.0001
[Sun Oct 30 17:41:39 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 17:41:39 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 17:41:39 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 17:41:39 2011] Source does appear to be extended
[Sun Oct 30 17:41:39 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 17:44:44 2011] Not overwriting source region fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.reg
[Sun Oct 30 17:44:44 2011] Extracting stamp from image fullrun_ccd1_acisf07248_pi14-548_cl_sm2.00.img.gz, (1182, 681) - (1259, 759)
[Sun Oct 30 17:44:44 2011] Writing fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12.gif
[Sun Oct 30 17:46:01 2011] ../../acisf07248/products/events/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.evt and ../../acisf07248/products/events/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Sun Oct 30 17:46:01 2011] Size of ../../acisf07248/products/events/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.evt.gz[events] = 27 counts
[Sun Oct 30 17:46:01 2011] Mean chipx,y = (889.56, 834.04)
[Sun Oct 30 17:46:01 2011] Mean tdetx,y = (4297.96, 4996.56)
[Sun Oct 30 17:46:01 2011] chipx,y range = (871.00-908.00, 817.00-852.00)
[Sun Oct 30 17:46:01 2011] Size of ../../acisf07248/products/events/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 14 counts
[Sun Oct 30 17:46:01 2011] ../../acisf07248/products/images/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.img and ../../acisf07248/products/images/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Sun Oct 30 17:46:01 2011] Not generating rmf since there are only 18 counts
[Sun Oct 30 17:46:01 2011] arf not found, will run specextract
[Sun Oct 30 17:46:03 2011] ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_bkg.pi not found
[Sun Oct 30 17:46:03 2011] ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12.warf not found
[Sun Oct 30 17:46:03 2011] ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12.wrmf not found
[Sun Oct 30 17:46:03 2011] Removal of ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12.soff failed
[Sun Oct 30 17:46:03 2011] Failed to rename ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_grp.pi to ../../acisf07248/products/spectra/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.pi
[Sun Oct 30 17:46:08 2011] ../../acisf07248/products/lightcurves/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.lc and ../../acisf07248/products/lightcurves/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Sun Oct 30 17:47:25 2011] No arf file found
[Sun Oct 30 17:48:59 2011] Updating aperture counts using extracted products
[Sun Oct 30 17:48:59 2011] Error reading totcts from fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_src.pi
[Sun Oct 30 17:48:59 2011] No arf file for this source, not re-computing flux
[Sun Oct 30 17:49:02 2011] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 17:49:03 2011] acisf07248/analysis//spectral/fullrun_ccd1_acisf07248_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete