[Sun Oct 30 17:39:58 2011] Detection parameters:
  Position = (915.3, 605.1) = 20 15 20.97 -70 50 37.9
  Extent = 1.1" x 0.9", rotation angle = 167 degrees
  Source counts = 62.5 +/- 8.3
  Background counts = 6.5
  Rate = 0.002 +/- 0.0002

[Sun Oct 30 17:40:00 2011] Off-axis axis estimate = 6.92'
[Sun Oct 30 17:40:54 2011] Using EEF radius (= 2.13 ")to estimate initial spatial extent for simple fitting
[Sun Oct 30 17:40:54 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 17:40:54 2011] Initial guess for spatial extent in simple fitting = 2.13"
[Sun Oct 30 17:40:54 2011] source mask rpix=4.3, npix_max = 93, mask sum = 100, frac = 1.070
[Sun Oct 30 17:40:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.13"
[Sun Oct 30 17:40:55 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1.ximg exists
[Sun Oct 30 17:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 17:40:55 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1_1.ximg exists
[Sun Oct 30 17:40:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1.csv
[Sun Oct 30 17:40:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07248_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 17:40:55 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Sun Oct 30 17:40:55 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Oct 30 17:40:55 2011] Fit fullrun_ccd0_acisf07248_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Oct 30 17:41:04 2011] Spatial fit model total counts = 86.716800, observed total counts = 85.000000
[Sun Oct 30 17:41:04 2011] Offset between fit and detection position for source 1 = 1.250974 pixels
[Sun Oct 30 17:41:04 2011] 87.272300 total counts/ 28.491300 bgd. counts: snr = 11.012371
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.250974 pixels
  Position = (916.5, 605.6) = 20 15 20.91 -70 50 38.0
  Extent = 1.7 (1.3-2.1)", rotation angle = 0
  Source counts = 58.8 +/- 9.3
  Background counts = 28.5
  Rate = 0.002 +/- 0.0003
[Sun Oct 30 17:41:04 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 17:41:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 17:41:04 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 17:41:04 2011] Source does appear to be extended
[Sun Oct 30 17:41:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 17:41:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct 30 17:41:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct 30 17:41:28 2011] Initial guess for spatial extent in simple fitting = 1.67"
[Sun Oct 30 17:41:28 2011] source mask rpix=3.4, npix_max = 60, mask sum = 49, frac = 0.808
[Sun Oct 30 17:41:28 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.67"
[Sun Oct 30 17:41:29 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1.ximg exists
[Sun Oct 30 17:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 17:41:29 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1_1.ximg exists
[Sun Oct 30 17:41:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1.csv
[Sun Oct 30 17:41:29 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07248_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct 30 17:41:29 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Sun Oct 30 17:41:29 2011] fullrun_ccd0_acisf07248_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Oct 30 17:41:29 2011] Fit fullrun_ccd0_acisf07248_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Oct 30 17:41:37 2011] Spatial fit model total counts = 76.804200, observed total counts = 77.000000
[Sun Oct 30 17:41:37 2011] Offset between fit and detection position for source 1 = 0.310037 pixels
[Sun Oct 30 17:41:37 2011] 76.732600 total counts/ 17.497900 bgd. counts: snr = 14.160651
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.310037 pixels
  Position = (916.8, 605.5) = 20 15 20.87 -70 50 38.0
  Extent = 1.7 (1.3-2.1)", rotation angle = 0
  Source counts = 59.2 +/- 8.8
  Background counts = 17.5
  Rate = 0.002 +/- 0.0003
[Sun Oct 30 17:41:37 2011] Vigneting correction estimate = 1.000000
[Sun Oct 30 17:41:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct 30 17:41:37 2011] Assessing source extent using major axis lower bound
[Sun Oct 30 17:41:37 2011] Source does appear to be extended
[Sun Oct 30 17:41:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct 30 17:41:57 2011] Not overwriting source region fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.reg
[Sun Oct 30 17:41:57 2011] Extracting stamp from image fullrun_ccd0_acisf07248_pi14-548_cl_sm2.00.img.gz, (837, 526) - (997, 685)
[Sun Oct 30 17:41:57 2011] Writing fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1.gif
[Sun Oct 30 17:42:00 2011] ../../acisf07248/products/events/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.evt and ../../acisf07248/products/events/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sun Oct 30 17:42:00 2011] Size of ../../acisf07248/products/events/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.evt.gz[events] = 74 counts
[Sun Oct 30 17:42:00 2011] Mean chipx,y = (434.69, 284.89)
[Sun Oct 30 17:42:00 2011] Mean tdetx,y = (3345.89, 4697.31)
[Sun Oct 30 17:42:00 2011] chipx,y range = (410.00-457.00, 263.00-316.00)
[Sun Oct 30 17:42:00 2011] Size of ../../acisf07248/products/events/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 75 counts
[Sun Oct 30 17:42:00 2011] ../../acisf07248/products/images/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.img and ../../acisf07248/products/images/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Sun Oct 30 17:42:00 2011] Not generating rmf since there are only 59 counts
[Sun Oct 30 17:42:00 2011] arf not found, will run specextract
[Sun Oct 30 17:42:02 2011] ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_bkg.pi not found
[Sun Oct 30 17:42:02 2011] ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1.warf not found
[Sun Oct 30 17:42:02 2011] ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1.wrmf not found
[Sun Oct 30 17:42:02 2011] Removal of ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1.soff failed
[Sun Oct 30 17:42:02 2011] Failed to rename ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_grp.pi to ../../acisf07248/products/spectra/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.pi
[Sun Oct 30 17:42:07 2011] ../../acisf07248/products/lightcurves/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.lc and ../../acisf07248/products/lightcurves/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sun Oct 30 17:44:44 2011] No arf file found
[Sun Oct 30 17:48:58 2011] Updating aperture counts using extracted products
[Sun Oct 30 17:48:58 2011] Error reading totcts from fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_src.pi
[Sun Oct 30 17:48:59 2011] No arf file for this source, not re-computing flux
[Sun Oct 30 17:49:01 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Oct 30 17:49:02 2011] acisf07248/analysis//spectral/fullrun_ccd0_acisf07248_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete