[Thu Sep 29 15:05:08 2011] Detection parameters:
  Position = (95.5, 521.6) = 14 16 22.75 52 19 16.5
  Extent = 0.5" x 0.5", rotation angle = 127 degrees
  Source counts = 261.7 +/- 16.2
  Background counts = 1.3
  Rate = 0.01 +/- 0.0008

[Thu Sep 29 15:05:08 2011] Off-axis axis estimate = 0.99'
[Thu Sep 29 15:05:59 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:05:59 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Thu Sep 29 15:05:59 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.390
[Thu Sep 29 15:05:59 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Thu Sep 29 15:06:00 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1.ximg exists
[Thu Sep 29 15:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:06:00 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1_1.ximg exists
[Thu Sep 29 15:06:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1.csv
[Thu Sep 29 15:06:00 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07236_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:06:00 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 15:06:00 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:06:00 2011] Fit fullrun_ccd3_acisf07236_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:06:10 2011] Spatial fit model total counts = 263.005000, observed total counts = 264.000000
[Thu Sep 29 15:06:10 2011] Offset between fit and detection position for source 12 = 0.765717 pixels
[Thu Sep 29 15:06:10 2011] 262.306960 total counts/ 8.901960 bgd. counts: snr = 84.932197
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.765717 pixels
  Position = (96.0, 522.2) = 14 16 22.75 52 19 16.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 253.4 +/- 16.2
  Background counts = 8.9
  Rate = 0.01 +/- 0.0008
[Thu Sep 29 15:06:10 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:06:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:06:10 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:06:10 2011] Source does appear to be extended
[Thu Sep 29 15:06:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:06:40 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:06:40 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Thu Sep 29 15:06:40 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.858
[Thu Sep 29 15:06:40 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 0.40"
[Thu Sep 29 15:06:40 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1.ximg exists
[Thu Sep 29 15:06:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:06:40 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1_1.ximg exists
[Thu Sep 29 15:06:40 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1.csv
[Thu Sep 29 15:06:40 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07236_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:06:40 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 15:06:40 2011] fullrun_ccd3_acisf07236_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:06:40 2011] Fit fullrun_ccd3_acisf07236_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 15:06:53 2011] Spatial fit model total counts = 261.187000, observed total counts = 264.000000
[Thu Sep 29 15:06:53 2011] Offset between fit and detection position for source 12 = 0.004598 pixels
[Thu Sep 29 15:06:53 2011] 259.891560 total counts/ 7.665560 bgd. counts: snr = 91.099902
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.004598 pixels
  Position = (96.0, 522.2) = 14 16 22.75 52 19 16.6
  Extent = 0.4 (0.4-0.4)", rotation angle = 0
  Source counts = 252.2 +/- 16.1
  Background counts = 7.7
  Rate = 0.01 +/- 0.0008
[Thu Sep 29 15:06:53 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 15:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 15:06:53 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 15:06:53 2011] Source does appear to be extended
[Thu Sep 29 15:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 15:09:52 2011] Not overwriting source region fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.reg
[Thu Sep 29 15:09:52 2011] Extracting stamp from image fullrun_ccd3_acisf07236_pi14-548_cl_sm2.00.img.gz, (78, 504) - (114, 541)
[Thu Sep 29 15:09:52 2011] Writing fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12.gif
[Thu Sep 29 15:09:53 2011] ../../acisf07236/products/events/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.evt and ../../acisf07236/products/events/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_bgd.evt exist, delete to re-create
[Thu Sep 29 15:09:53 2011] Size of ../../acisf07236/products/events/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.evt.gz[events] = 256 counts
[Thu Sep 29 15:09:53 2011] Mean chipx,y = (1003.98, 896.46)
[Thu Sep 29 15:09:53 2011] Mean tdetx,y = (4235.54, 4064.98)
[Thu Sep 29 15:09:53 2011] chipx,y range = (987.00-1023.00, 881.00-917.00)
[Thu Sep 29 15:09:53 2011] Size of ../../acisf07236/products/events/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 6 counts
[Thu Sep 29 15:09:53 2011] ../../acisf07236/products/images/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.img and ../../acisf07236/products/images/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_bgd.img exist, delete to re-create
[Thu Sep 29 15:09:53 2011] ../../acisf07236/products/spectra/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.pi and ../../acisf07236/products/spectra/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_bgd.pi exist, delete to re-create
[Thu Sep 29 15:09:56 2011] ../../acisf07236/products/lightcurves/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.lc and ../../acisf07236/products/lightcurves/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_bgd.lc exist, delete to re-create
[Thu Sep 29 15:10:34 2011] Keeping rmf generated by specextract
[Thu Sep 29 15:10:35 2011] 204.179
[Thu Sep 29 15:10:39 2011] Updating aperture counts using extracted products
[Thu Sep 29 15:10:39 2011] Error reading totcts from fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_src.pi.gz
[Thu Sep 29 15:10:39 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:10:39 2011] Using photon index=1.80, rate=0.0124, arf fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12.arf
[Thu Sep 29 15:10:39 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:10:39 2011] Updating source flux to 1.4e-13
[Thu Sep 29 15:10:59 2011] Reading fit data from acisf07236/analysis//spectral/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_pl.csv
[Thu Sep 29 15:10:59 2011] Spectral fit parameter nH value = 1.91104e+21
[Thu Sep 29 15:10:59 2011] Spectral fit parameter PhoIndex value = 1.91411
[Thu Sep 29 15:10:59 2011] Failed to get F(0.3-8.0) from acisf07236/analysis//spectral/fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Thu Sep 29 15:10:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Sep 29 15:10:59 2011] Using Nh = 1.9e+21, photon index=1.91, rate=0.0124, arf fullrun_ccd3_acisf07236_pi14-548_pass1_cl_src12.arf
[Thu Sep 29 15:10:59 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Thu Sep 29 15:10:59 2011] Updating source flux to 1.3e-13