[Mon Oct 17 02:59:37 2011] Detection parameters:
  Position = (193.8, 476.6) = 1 33 42.54 30 42 52.7
  Extent = 2.3" x 1.2", rotation angle = 79 degrees
  Source counts = 43.0 +/- 6.9
  Background counts = 5.0
  Rate = 0.002 +/- 0.0003

[Mon Oct 17 02:59:39 2011] Off-axis axis estimate = 7.86'
[Mon Oct 17 03:51:08 2011] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 03:51:08 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Mon Oct 17 03:51:08 2011] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.981
[Mon Oct 17 03:51:08 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 2.73"
[Mon Oct 17 04:11:18 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5.ximg exists
[Mon Oct 17 04:11:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 04:11:18 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5_1.ximg exists
[Mon Oct 17 04:11:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5.csv
[Mon Oct 17 04:11:18 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07226_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 04:11:18 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Mon Oct 17 04:11:18 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Mon Oct 17 04:11:18 2011] Fit fullrun_ccd3_acisf07226_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Mon Oct 17 04:43:02 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 31.889864 pixels away
[Mon Oct 17 04:43:02 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 04:43:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 04:43:02 2011] Assessing source extent using major
[Mon Oct 17 04:43:02 2011] Source does appear to be extended
[Mon Oct 17 04:43:02 2011] Computing asymmetry using major and minor axis, asym = 1.96
[Mon Oct 17 04:43:02 2011] Source is asymmetric
[Mon Oct 17 05:30:00 2011] Using EEF radius (= 2.73 ")to estimate initial spatial extent for simple fitting
[Mon Oct 17 05:30:00 2011] Initial guess for spatial extent in simple fitting = 2.73"
[Mon Oct 17 05:30:00 2011] source mask rpix=5.6, npix_max = 146, mask sum = 144, frac = 0.981
[Mon Oct 17 05:30:00 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 2.73"
[Mon Oct 17 05:45:41 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5.ximg exists
[Mon Oct 17 05:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 05:45:41 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5_1.ximg exists
[Mon Oct 17 05:45:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5.csv
[Mon Oct 17 05:45:41 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07226_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 17 05:45:41 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Mon Oct 17 05:45:41 2011] fullrun_ccd3_acisf07226_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Oct 17 05:45:41 2011] Fit fullrun_ccd3_acisf07226_pi14-548_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Oct 17 06:14:19 2011] Spatial fit model total counts = 54.997700, observed total counts = 55.000000
[Mon Oct 17 06:14:19 2011] Offset between fit and detection position for source 3 = 0.971419 pixels
[Mon Oct 17 06:14:19 2011] 55.398500 total counts/ 20.528200 bgd. counts: snr = 7.696269
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.971419 pixels
  Position = (193.8, 477.6) = 1 33 42.55 30 42 52.9
  Extent = 1.7 (1.2-2.5)", rotation angle = 0
  Source counts = 34.9 +/- 7.4
  Background counts = 20.5
  Rate = 0.001 +/- 0.0003
[Mon Oct 17 06:14:19 2011] Vigneting correction estimate = 1.000000
[Mon Oct 17 06:14:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 17 06:14:19 2011] Assessing source extent using major axis lower bound
[Mon Oct 17 06:14:19 2011] Source does appear to be extended
[Mon Oct 17 06:14:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 17 06:20:03 2011] Writing source region out to fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_src.reg
[Mon Oct 17 06:20:03 2011] Extracting stamp from image fullrun_ccd3_acisf07226_pi14-548_cl_sm2.00.img.gz, (117, 401) - (271, 555)
[Mon Oct 17 06:20:03 2011] Writing fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3.gif
[Mon Oct 17 06:20:48 2011] Size of ../../acisf07226/products/events/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_src.evt.gz[events] = 46 counts
[Mon Oct 17 06:20:48 2011] Mean chipx,y = (111.67, 554.54)
[Mon Oct 17 06:20:48 2011] Mean tdetx,y = (4577.46, 3172.67)
[Mon Oct 17 06:20:48 2011] chipx,y range = (91.00-135.00, 526.00-576.00)
[Mon Oct 17 06:20:48 2011] Size of ../../acisf07226/products/events/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 48 counts
[Mon Oct 17 06:20:49 2011] Not generating rmf since there are only 34 counts
[Mon Oct 17 06:20:49 2011] arf not found, will run specextract
[Mon Oct 17 06:20:50 2011] ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_bkg.pi not found
[Mon Oct 17 06:20:50 2011] ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3.warf not found
[Mon Oct 17 06:20:50 2011] ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3.wrmf not found
[Mon Oct 17 06:20:50 2011] Removal of ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3.soff failed
[Mon Oct 17 06:20:50 2011] Failed to rename ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_grp.pi to ../../acisf07226/products/spectra/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_src.pi
[Mon Oct 17 06:22:13 2011] No arf file found
[Mon Oct 17 06:22:38 2011] Updating aperture counts using extracted products
[Mon Oct 17 06:22:38 2011] Error reading totcts from fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_src.pi
[Mon Oct 17 06:22:38 2011] No arf file for this source, not re-computing flux
[Mon Oct 17 06:22:43 2011] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Mon Oct 17 06:22:44 2011] acisf07226/analysis//spectral/fullrun_ccd3_acisf07226_pi14-548_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete