[Mon Oct 31 03:10:51 2011] Detection parameters:
  Position = (214.2, 850.4) = 12 30 49.36 12 23 28.4
  Extent = 0.9" x 0.7", rotation angle = 24 degrees
  Source counts = 9907.2 +/- 110.4
  Background counts = 2273.8
  Rate = 0.3 +/- 0.004

[Mon Oct 31 03:10:53 2011] Off-axis axis estimate = 0.78'
[Mon Oct 31 03:15:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:15:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 31 03:15:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.379
[Mon Oct 31 03:15:29 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 0.38"
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1_1.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1.csv
[Mon Oct 31 03:15:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Oct 31 03:15:31 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Oct 31 03:15:44 2011] Spatial fit model total counts = 11175.700000, observed total counts = 11178.000000
[Mon Oct 31 03:15:44 2011] Offset between fit and detection position for source 9 = 0.447162 pixels
[Mon Oct 31 03:15:44 2011] 11282.350000 total counts/ 3359.110000 bgd. counts: snr = 136.706983
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.447162 pixels
  Position = (214.5, 850.8) = 12 30 49.37 12 23 28.4
  Extent = 1.0 (1.0-1.0)", rotation angle = 0
  Source counts = 7923.2 +/- 106.2
  Background counts = 3359.1
  Rate = 0.3 +/- 0.003
[Mon Oct 31 03:15:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:15:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:15:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:15:44 2011] Source does appear to be extended
[Mon Oct 31 03:15:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:15:44 2011] Source is confused with source 1
[Mon Oct 31 03:16:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:16:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 03:16:01 2011] Initial guess for spatial extent in simple fitting = 1.01"
[Mon Oct 31 03:16:01 2011] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.955
[Mon Oct 31 03:16:01 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.01"
[Mon Oct 31 03:16:01 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1.ximg exists
[Mon Oct 31 03:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 03:16:01 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1_1.ximg exists
[Mon Oct 31 03:16:01 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1.csv
[Mon Oct 31 03:16:01 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Oct 31 03:16:02 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Oct 31 03:16:10 2011] Spatial fit model total counts = 11136.100000, observed total counts = 11178.000000
[Mon Oct 31 03:16:10 2011] Offset between fit and detection position for source 9 = 0.055193 pixels
[Mon Oct 31 03:16:10 2011] 11063.440000 total counts/ 2760.440000 bgd. counts: snr = 158.032308
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.055193 pixels
  Position = (214.5, 850.8) = 12 30 49.37 12 23 28.4
  Extent = 1.1 (1.1-1.1)", rotation angle = 0
  Source counts = 8303.0 +/- 105.2
  Background counts = 2760.4
  Rate = 0.3 +/- 0.003
[Mon Oct 31 03:16:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:16:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:16:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:16:10 2011] Source does appear to be extended
[Mon Oct 31 03:16:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:17:26 2011] Not overwriting source region fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.reg
[Mon Oct 31 03:17:26 2011] Extracting stamp from image fullrun_ccd3_acisf07210_pi14-548_cl_sm2.00.img.gz, (164, 801) - (265, 901)
[Mon Oct 31 03:17:26 2011] Writing fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9.gif
[Mon Oct 31 03:17:27 2011] ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.evt and ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_bgd.evt exist, delete to re-create
[Mon Oct 31 03:17:27 2011] Size of ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.evt.gz[events] = 11419 counts
[Mon Oct 31 03:17:27 2011] Mean chipx,y = (859.54, 912.84)
[Mon Oct 31 03:17:27 2011] Mean tdetx,y = (4219.16, 3920.54)
[Mon Oct 31 03:17:27 2011] chipx,y range = (828.00-885.00, 888.00-938.00)
[Mon Oct 31 03:17:27 2011] Size of ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_bgd.evt.gz[events] = 6215 counts
[Mon Oct 31 03:17:27 2011] ../../acisf07210/products/images/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.img and ../../acisf07210/products/images/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_bgd.img exist, delete to re-create
[Mon Oct 31 03:17:27 2011] ../../acisf07210/products/spectra/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.pi and ../../acisf07210/products/spectra/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_bgd.pi exist, delete to re-create
[Mon Oct 31 03:17:30 2011] ../../acisf07210/products/lightcurves/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.lc and ../../acisf07210/products/lightcurves/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_bgd.lc exist, delete to re-create
[Mon Oct 31 03:18:14 2011] Keeping rmf generated by specextract
[Mon Oct 31 03:18:14 2011] 203.039
[Mon Oct 31 03:18:16 2011] Updating aperture counts using extracted products
[Mon Oct 31 03:18:16 2011] Error reading totcts from fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_src.pi.gz
[Mon Oct 31 03:18:16 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 03:18:16 2011] Using photon index=1.80, rate=0.27, arf fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9.arf
[Mon Oct 31 03:18:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 03:18:16 2011] Updating source flux to 3e-12
[Mon Oct 31 03:18:43 2011] Flag c found in src. 9 procflags, skipping spectral fitting
[Mon Oct 31 03:19:40 2011] Reading fit data from acisf07210/analysis//spectral/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_pl.csv
[Mon Oct 31 03:19:40 2011] Spectral fit parameter nH value = 2.0226e+13
[Mon Oct 31 03:19:40 2011] Spectral fit parameter PhoIndex value = 1.28413
[Mon Oct 31 03:19:40 2011] Failed to get F(0.3-8.0) from acisf07210/analysis//spectral/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9_pl.csv, possibly due to different flux energy range selected
[Mon Oct 31 03:19:40 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 03:19:40 2011] Using Nh = 2e+13, photon index=1.28, rate=0.27, arf fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src9.arf
[Mon Oct 31 03:19:40 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 03:19:40 2011] Updating source flux to 3.6e-12