[Mon Oct 31 03:10:50 2011] Detection parameters:
  Position = (280.6, 947.1) = 12 30 47.13 12 24 16.0
  Extent = 0.5" x 0.5", rotation angle = 13 degrees
  Source counts = 142.4 +/- 15.0
  Background counts = 81.6
  Rate = 0.005 +/- 0.0005

[Mon Oct 31 03:10:53 2011] Off-axis axis estimate = 1.12'
[Mon Oct 31 03:15:29 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:15:29 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Oct 31 03:15:29 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Mon Oct 31 03:15:29 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 0.38"
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9.csv
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9_1.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9.csv
[Mon Oct 31 03:15:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src9.ximg exists
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Oct 31 03:15:31 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Oct 31 03:15:44 2011] Spatial fit model total counts = 489.000000, observed total counts = 489.000000
[Mon Oct 31 03:15:44 2011] Offset between fit and detection position for source 6 = 0.701182 pixels
[Mon Oct 31 03:15:44 2011] 490.085000 total counts/ 341.227000 bgd. counts: snr = 8.058431
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.701182 pixels
  Position = (281.2, 947.5) = 12 30 47.13 12 24 16.0
  Extent = 0.5 (0.4-0.5)", rotation angle = 0
  Source counts = 148.9 +/- 22.1
  Background counts = 341.2
  Rate = 0.005 +/- 0.0007
[Mon Oct 31 03:15:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:15:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:15:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:15:44 2011] Source does appear to be extended
[Mon Oct 31 03:15:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:16:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:16:01 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Mon Oct 31 03:16:01 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.123
[Mon Oct 31 03:16:01 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 0.45"
[Mon Oct 31 03:16:01 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8.ximg exists
[Mon Oct 31 03:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8.csv
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8_1.ximg exists
[Mon Oct 31 03:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8.csv
[Mon Oct 31 03:16:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src8.ximg exists
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src8_1.ximg exists
[Mon Oct 31 03:16:02 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src8 appears to have run properly
[Mon Oct 31 03:16:10 2011] Spatial fit model total counts = 488.000000, observed total counts = 488.000000
[Mon Oct 31 03:16:10 2011] Offset between fit and detection position for source 6 = 0.001761 pixels
[Mon Oct 31 03:16:10 2011] 489.513000 total counts/ 340.969000 bgd. counts: snr = 8.044474
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.001761 pixels
  Position = (281.2, 947.5) = 12 30 47.13 12 24 16.0
  Extent = 0.4 (0.4-0.5)", rotation angle = 0
  Source counts = 148.5 +/- 22.1
  Background counts = 341.0
  Rate = 0.005 +/- 0.0007
[Mon Oct 31 03:16:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:16:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:16:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:16:10 2011] Source does appear to be extended
[Mon Oct 31 03:16:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:17:26 2011] Not overwriting source region fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.reg
[Mon Oct 31 03:17:26 2011] Extracting stamp from image fullrun_ccd3_acisf07210_pi14-548_cl_sm2.00.img.gz, (261, 927) - (302, 968)
[Mon Oct 31 03:17:26 2011] Writing fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6.gif
[Mon Oct 31 03:17:41 2011] ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.evt and ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_bgd.evt exist, delete to re-create
[Mon Oct 31 03:17:41 2011] Size of ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.evt.gz[events] = 205 counts
[Mon Oct 31 03:17:41 2011] Mean chipx,y = (748.04, 955.20)
[Mon Oct 31 03:17:41 2011] Mean tdetx,y = (4176.80, 3809.04)
[Mon Oct 31 03:17:41 2011] chipx,y range = (730.00-767.00, 937.00-972.00)
[Mon Oct 31 03:17:41 2011] Size of ../../acisf07210/products/events/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_bgd.evt.gz[events] = 675 counts
[Mon Oct 31 03:17:41 2011] ../../acisf07210/products/images/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.img and ../../acisf07210/products/images/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_bgd.img exist, delete to re-create
[Mon Oct 31 03:17:41 2011] ../../acisf07210/products/spectra/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.pi and ../../acisf07210/products/spectra/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_bgd.pi exist, delete to re-create
[Mon Oct 31 03:17:44 2011] ../../acisf07210/products/lightcurves/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.lc and ../../acisf07210/products/lightcurves/fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_bgd.lc exist, delete to re-create
[Mon Oct 31 03:18:14 2011] Keeping rmf generated by specextract
[Mon Oct 31 03:18:14 2011] 201.523
[Mon Oct 31 03:18:16 2011] Updating aperture counts using extracted products
[Mon Oct 31 03:18:16 2011] Error reading totcts from fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6_src.pi.gz
[Mon Oct 31 03:18:17 2011] Calculating source flux in energy range 0.30-8.00
[Mon Oct 31 03:18:17 2011] Using photon index=1.80, rate=0.00484, arf fullrun_ccd3_acisf07210_pi14-548_pass1_cl_src6.arf
[Mon Oct 31 03:18:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Mon Oct 31 03:18:17 2011] Updating source flux to 5.5e-14