[Mon Oct 31 03:10:52 2011] Detection parameters:
  Position = (925.7, 806.2) = 12 30 25.47 12 23 6.6
  Extent = 2.5" x 1.2", rotation angle = 87 degrees
  Source counts = 61.0 +/- 11.6
  Background counts = 74.0
  Rate = 0.002 +/- 0.0004

[Mon Oct 31 03:10:53 2011] Off-axis axis estimate = 6.45'
[Mon Oct 31 03:15:29 2011] Using EEF radius (= 1.87 ")to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:15:29 2011] Initial guess for spatial extent in simple fitting = 1.87"
[Mon Oct 31 03:15:29 2011] source mask rpix=3.8, npix_max = 73, mask sum = 72, frac = 0.977
[Mon Oct 31 03:15:29 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 1.87"
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20.csv
[Mon Oct 31 03:15:30 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20_1.ximg exists
[Mon Oct 31 03:15:30 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20.csv
[Mon Oct 31 03:15:30 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src20.ximg exists
[Mon Oct 31 03:15:31 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src20_1.ximg exists
[Mon Oct 31 03:15:31 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass0_tfrozen_src20 appears to have run properly
[Mon Oct 31 03:15:44 2011] Spatial fit model total counts = 159.987000, observed total counts = 161.000000
[Mon Oct 31 03:15:44 2011] Offset between fit and detection position for source 29 = 4.319591 pixels
[Mon Oct 31 03:15:44 2011] 152.169300 total counts/ 25.747300 bgd. counts: snr = 24.914766
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.319591 pixels
  Position = (927.2, 810.2) = 12 30 25.44 12 23 8.3
  Extent = 2.9 (1.9-3.7)", rotation angle = 0
  Source counts = 126.4 +/- 12.3
  Background counts = 25.7
  Rate = 0.004 +/- 0.0004
[Mon Oct 31 03:15:44 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:15:44 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:15:44 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:15:44 2011] Source does appear to be extended
[Mon Oct 31 03:15:44 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:16:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Oct 31 03:16:01 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Oct 31 03:16:01 2011] Initial guess for spatial extent in simple fitting = 2.87"
[Mon Oct 31 03:16:01 2011] source mask rpix=5.8, npix_max = 160, mask sum = 169, frac = 1.054
[Mon Oct 31 03:16:01 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 2.87"
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19.ximg exists
[Mon Oct 31 03:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19.csv
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19_1.ximg exists
[Mon Oct 31 03:16:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19.csv
[Mon Oct 31 03:16:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07210_pi14-548_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src19.ximg exists
[Mon Oct 31 03:16:02 2011] fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Oct 31 03:16:02 2011] Fit fullrun_ccd3_acisf07210_pi14-548_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Oct 31 03:16:10 2011] Spatial fit model total counts = 295.976000, observed total counts = 296.000000
[Mon Oct 31 03:16:10 2011] Offset between fit and detection position for source 29 = 4.498422 pixels
[Mon Oct 31 03:16:10 2011] 295.601800 total counts/ 242.621000 bgd. counts: snr = 3.401373
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 4.498422 pixels
  Position = (926.3, 805.8) = 12 30 25.47 12 23 6.2
  Extent = 1.6 (1.0-3.0)", rotation angle = 0
  Source counts = 53.0 +/- 17.2
  Background counts = 242.6
  Rate = 0.002 +/- 0.0006
[Mon Oct 31 03:16:10 2011] Vigneting correction estimate = 1.000000
[Mon Oct 31 03:16:10 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Oct 31 03:16:10 2011] Assessing source extent using major axis lower bound
[Mon Oct 31 03:16:10 2011] Source does appear to be extended
[Mon Oct 31 03:16:10 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Oct 31 03:16:10 2011] Deleting source due to low Poisson probability 0.9