[Mon Feb 13 07:16:02 2012] Detection parameters:
  Position = (849.2, 93.5) = 0 42 43.85 41 16 4.0
  Extent = 0.6" x 0.5", rotation angle = 158 degrees
  Source counts = 26.1 +/- 5.4
  Background counts = 2.9
  Rate = 0.007 +/- 0.001

[Mon Feb 13 07:16:03 2012] Off-axis axis estimate = 0.72'
[Mon Feb 13 08:10:13 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 08:10:13 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 13 08:10:13 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.915
[Mon Feb 13 08:10:13 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 0.38"
[Mon Feb 13 08:41:47 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23.ximg exists
[Mon Feb 13 08:41:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23.csv
[Mon Feb 13 08:41:48 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23_1.ximg exists
[Mon Feb 13 08:41:48 2012] Warning: model total counts is not > 0 in csv/fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23.csv
[Mon Feb 13 08:41:48 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07136_pi14-548_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 08:41:48 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass0_tfrozen_src23.ximg exists
[Mon Feb 13 08:41:48 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass0_tfrozen_src23_1.ximg exists
[Mon Feb 13 08:41:48 2012] Fit fullrun_ccd3_acisf07136_pi14-548_cl_pass0_tfrozen_src23 appears to have run properly
[Mon Feb 13 08:57:21 2012] Source 11 is offset by -0.801926 and -0.465332 pixels which is larger than
2 X fitted extent = 0.390240 x 0.390240, not incorporating fit results
[Mon Feb 13 08:57:21 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 08:57:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 08:57:21 2012] Assessing source extent using major
[Mon Feb 13 08:57:21 2012] Source does appear to be extended
[Mon Feb 13 08:57:21 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Mon Feb 13 09:30:19 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Mon Feb 13 09:30:19 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Mon Feb 13 09:30:19 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.915
[Mon Feb 13 09:30:19 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 0.38"
[Mon Feb 13 09:53:24 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16.ximg exists
[Mon Feb 13 09:53:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16.csv
[Mon Feb 13 09:53:24 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16_1.ximg exists
[Mon Feb 13 09:53:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16.csv
[Mon Feb 13 09:53:24 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07136_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 13 09:53:24 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Mon Feb 13 09:53:24 2012] fullrun_ccd3_acisf07136_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Mon Feb 13 09:53:24 2012] Fit fullrun_ccd3_acisf07136_pi14-548_cl_pass1_tfrozen_src16 appears to have run properly
[Mon Feb 13 10:09:54 2012] Source 11 is offset by -0.801926 and -0.465332 pixels which is larger than
2 X fitted extent = 0.390240 x 0.390240, not incorporating fit results
[Mon Feb 13 10:09:54 2012] Vigneting correction estimate = 1.000000
[Mon Feb 13 10:09:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 13 10:09:54 2012] Assessing source extent using major
[Mon Feb 13 10:09:54 2012] Source does appear to be extended
[Mon Feb 13 10:09:54 2012] Computing asymmetry using major and minor axis, asym = 1.12
[Mon Feb 13 10:17:50 2012] Writing source region out to fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11_src.reg
[Mon Feb 13 10:17:50 2012] Extracting stamp from image fullrun_ccd3_acisf07136_pi14-548_cl_sm2.00.img.gz, (824, 68) - (875, 119)
[Mon Feb 13 10:17:50 2012] Writing fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11.gif
[Mon Feb 13 10:21:25 2012] Size of ../../acisf07136/products/events/fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11_src.evt.gz[events] = 1 counts
[Mon Feb 13 10:21:25 2012] Mean chipx,y = (949.00, 936.00)
[Mon Feb 13 10:21:25 2012] Mean tdetx,y = (4196.00, 4010.00)
[Mon Feb 13 10:21:25 2012] chipx,y range = (949.00-949.00, 936.00-936.00)
[Mon Feb 13 10:21:25 2012] ../../acisf07136/products/events/fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11_bgd.evt.gz[events] does not have any counts, not extracting spectra.
[Mon Feb 13 10:25:28 2012] No arf file found
[Mon Feb 13 10:26:19 2012] Updating aperture counts using extracted products
[Mon Feb 13 10:26:19 2012] Error reading totcts from fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11_src.pi
[Mon Feb 13 10:26:19 2012] No arf file for this source, not re-computing flux
[Mon Feb 13 10:26:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Feb 13 10:26:26 2012] acisf07136/analysis//spectral/fullrun_ccd3_acisf07136_pi14-548_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete