[Wed Feb 15 10:19:55 2012] Detection parameters:
  Position = (890.1, 30.7) = 0 42 47.88 41 15 33.4
  Extent = 0.5" x 0.5", rotation angle = 164 degrees
  Source counts = 12.8 +/- 3.6
  Background counts = 0.2
  Rate = 0.01 +/- 0.004

[Wed Feb 15 10:19:55 2012] Off-axis axis estimate = 0.78'
[Wed Feb 15 10:47:28 2012] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Wed Feb 15 10:47:28 2012] Initial guess for spatial extent in simple fitting = 0.38"
[Wed Feb 15 10:47:28 2012] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.919
[Wed Feb 15 10:47:28 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.38"
[Wed Feb 15 11:00:25 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11.ximg exists
[Wed Feb 15 11:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11.csv
[Wed Feb 15 11:00:25 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11_1.ximg exists
[Wed Feb 15 11:00:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11.csv
[Wed Feb 15 11:00:25 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07064_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 11:00:25 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Wed Feb 15 11:00:25 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Feb 15 11:00:25 2012] Fit fullrun_ccd3_acisf07064_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Feb 15 11:18:24 2012] Spatial fit model total counts = 13.307200, observed total counts = 14.000000
[Wed Feb 15 11:18:24 2012] Offset between fit and detection position for source 29 = 0.686134 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.686134 pixels
  Position = (890.6, 31.2) = 0 42 47.89 41 15 33.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 13.0 +/- 3.6
  Background counts = 0.0
  Rate = 0.01 +/- 0.004
[Wed Feb 15 11:18:24 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 11:18:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 11:18:24 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 11:18:24 2012] Source does appear to be extended
[Wed Feb 15 11:18:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 11:40:48 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 15 11:40:48 2012] Initial guess for spatial extent in simple fitting = 0.39"
[Wed Feb 15 11:40:48 2012] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.329
[Wed Feb 15 11:40:48 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.39"
[Wed Feb 15 11:56:20 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass1_src11.ximg exists
[Wed Feb 15 11:56:20 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass1_src11_1.ximg exists
[Wed Feb 15 11:56:20 2012] Fit fullrun_ccd3_acisf07064_pi14-548_cl_pass1_src11 appears to have run properly
[Wed Feb 15 11:56:20 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Wed Feb 15 11:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed Feb 15 11:56:20 2012] fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Feb 15 11:56:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11.csv
[Wed Feb 15 11:56:20 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07064_pi14-548_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 15 12:18:40 2012] Spatial fit model total counts = 12.176700, observed total counts = 14.000000
[Wed Feb 15 12:18:40 2012] Offset between fit and detection position for source 29 = 0.021668 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.021668 pixels
  Position = (890.6, 31.2) = 0 42 47.89 41 15 33.4
  Extent = 0.4 (0.3-0.5)", rotation angle = 0
  Source counts = 11.9 +/- 3.5
  Background counts = 0.0
  Rate = 0.01 +/- 0.004
[Wed Feb 15 12:18:40 2012] Vigneting correction estimate = 1.000000
[Wed Feb 15 12:18:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 15 12:18:40 2012] Assessing source extent using major axis lower bound
[Wed Feb 15 12:18:40 2012] Source does appear to be extended
[Wed Feb 15 12:18:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 15 12:37:17 2012] Writing source region out to fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29_src.reg
[Wed Feb 15 12:37:17 2012] Extracting stamp from image fullrun_ccd3_acisf07064_pi14-548_cl_sm2.00.img.gz, (872, 13) - (909, 50)
[Wed Feb 15 12:37:17 2012] Writing fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29.gif
[Wed Feb 15 12:43:46 2012] Size of ../../acisf07064/products/events/fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29_src.evt.gz[events] = 13 counts
[Wed Feb 15 12:43:46 2012] Mean chipx,y = (861.85, 1011.15)
[Wed Feb 15 12:43:46 2012] Mean tdetx,y = (4120.85, 3922.85)
[Wed Feb 15 12:43:46 2012] chipx,y range = (849.00-879.00, 995.00-1022.00)
[Wed Feb 15 12:43:46 2012] Size of ../../acisf07064/products/events/fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29_bgd.evt.gz[events] = 3 counts
[Wed Feb 15 12:43:47 2012] Not generating rmf since there are only 11 counts
[Wed Feb 15 12:43:47 2012] arf not found, will run specextract
[Wed Feb 15 12:44:22 2012] ../../acisf07064/products/spectra/fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29.warf not found
[Wed Feb 15 12:44:22 2012] ../../acisf07064/products/spectra/fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29.wrmf not found
[Wed Feb 15 12:44:22 2012] Removal of ../../acisf07064/products/spectra/fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29.soff failed
[Wed Feb 15 12:52:29 2012] Spectrum 29 has only 12 counts, deleting rmf
[Wed Feb 15 12:52:29 2012] 145.331
[Wed Feb 15 12:52:51 2012] Updating aperture counts using extracted products
[Wed Feb 15 12:52:51 2012] Error reading totcts from fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29_src.pi.gz
[Wed Feb 15 12:52:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 15 12:52:52 2012] Using photon index=1.80, rate=0.0138, arf fullrun_ccd3_acisf07064_pi14-548_pass1_cl_src29.arf
[Wed Feb 15 12:52:52 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Feb 15 12:52:52 2012] Updating source flux to 2.1e-13
[Wed Feb 15 12:53:01 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting