[Fri Oct  7 05:14:42 2011] Detection parameters:
  Position = (853.4, 393.6) = 17 46 36.62 -28 34 6.9
  Extent = 0.7" x 0.5", rotation angle = 150 degrees
  Source counts = 13.1 +/- 3.9
  Background counts = 1.9
  Rate = 0.0003 +/- 0.0001

[Fri Oct  7 05:14:47 2011] Off-axis axis estimate = 3.01'
[Fri Oct  7 05:17:05 2011] Using EEF radius (= 0.58 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:17:05 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct  7 05:17:05 2011] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.795
[Fri Oct  7 05:17:05 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 0.58"
[Fri Oct  7 05:17:08 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14.ximg exists
[Fri Oct  7 05:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14.csv
[Fri Oct  7 05:17:09 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14_1.ximg exists
[Fri Oct  7 05:17:09 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14.csv
[Fri Oct  7 05:17:09 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07044_pi14-548_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:17:09 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass0_tfrozen_src14.ximg exists
[Fri Oct  7 05:17:10 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass0_tfrozen_src14_1.ximg exists
[Fri Oct  7 05:17:10 2011] Fit fullrun_ccd3_acisf07044_pi14-548_cl_pass0_tfrozen_src14 appears to have run properly
[Fri Oct  7 05:17:45 2011] Spatial fit model total counts = 23.996100, observed total counts = 24.000000
[Fri Oct  7 05:17:45 2011] Offset between fit and detection position for source 14 = 0.935568 pixels
[Fri Oct  7 05:17:45 2011] 24.596800 total counts/ 13.584900 bgd. counts: snr = 2.987680
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.935568 pixels
  Position = (853.2, 394.5) = 17 46 36.64 -28 34 6.7
  Extent = 0.5 (0.2-0.9)", rotation angle = 0
  Source counts = 11.0 +/- 5.0
  Background counts = 13.6
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 05:17:45 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:17:45 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:17:45 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:17:45 2011] Source does appear to be extended
[Fri Oct  7 05:17:45 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:18:28 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:18:28 2011] Initial guess for spatial extent in simple fitting = 0.52"
[Fri Oct  7 05:18:28 2011] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.929
[Fri Oct  7 05:18:28 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 0.52"
[Fri Oct  7 05:18:31 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14.ximg exists
[Fri Oct  7 05:18:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14.csv
[Fri Oct  7 05:18:31 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14_1.ximg exists
[Fri Oct  7 05:18:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14.csv
[Fri Oct  7 05:18:31 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07044_pi14-548_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:18:32 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass1_tfrozen_src14.ximg exists
[Fri Oct  7 05:18:32 2011] fullrun_ccd3_acisf07044_pi14-548_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Oct  7 05:18:32 2011] Fit fullrun_ccd3_acisf07044_pi14-548_cl_pass1_tfrozen_src14 appears to have run properly
[Fri Oct  7 05:19:02 2011] Spatial fit model total counts = 23.873100, observed total counts = 24.000000
[Fri Oct  7 05:19:02 2011] Offset between fit and detection position for source 14 = 0.010789 pixels
[Fri Oct  7 05:19:02 2011] 24.471900 total counts/ 13.579100 bgd. counts: snr = 2.955997
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.010789 pixels
  Position = (853.2, 394.5) = 17 46 36.64 -28 34 6.7
  Extent = 0.5 (0.2-0.9)", rotation angle = 0
  Source counts = 10.9 +/- 4.9
  Background counts = 13.6
  Rate = 0.0003 +/- 0.0001
[Fri Oct  7 05:19:02 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:19:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:19:02 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:19:02 2011] Source does appear to be extended
[Fri Oct  7 05:19:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:26:25 2011] Not overwriting source region fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.reg
[Fri Oct  7 05:26:25 2011] Extracting stamp from image fullrun_ccd3_acisf07044_pi14-548_cl_sm2.00.img.gz, (830, 371) - (877, 418)
[Fri Oct  7 05:26:25 2011] Writing fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14.gif
[Fri Oct  7 05:27:22 2011] ../../acisf07044/products/events/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.evt and ../../acisf07044/products/events/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_bgd.evt exist, delete to re-create
[Fri Oct  7 05:27:22 2011] Size of ../../acisf07044/products/events/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.evt.gz[events] = 13 counts
[Fri Oct  7 05:27:22 2011] Mean chipx,y = (823.85, 676.69)
[Fri Oct  7 05:27:22 2011] Mean tdetx,y = (4455.31, 3884.85)
[Fri Oct  7 05:27:22 2011] chipx,y range = (808.00-839.00, 655.00-687.00)
[Fri Oct  7 05:27:22 2011] Size of ../../acisf07044/products/events/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_bgd.evt.gz[events] = 20 counts
[Fri Oct  7 05:27:22 2011] ../../acisf07044/products/images/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.img and ../../acisf07044/products/images/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_bgd.img exist, delete to re-create
[Fri Oct  7 05:27:22 2011] ../../acisf07044/products/spectra/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.pi and ../../acisf07044/products/spectra/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_bgd.pi exist, delete to re-create
[Fri Oct  7 05:27:22 2011] Not generating rmf since there are only 10 counts
[Fri Oct  7 05:27:25 2011] ../../acisf07044/products/lightcurves/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.lc and ../../acisf07044/products/lightcurves/fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_bgd.lc exist, delete to re-create
[Fri Oct  7 05:29:44 2011] 195.266
[Fri Oct  7 05:29:56 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:29:56 2011] Error reading totcts from fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14_src.pi.gz
[Fri Oct  7 05:29:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:29:56 2011] Using photon index=1.80, rate=0.000288, arf fullrun_ccd3_acisf07044_pi14-548_pass1_cl_src14.arf
[Fri Oct  7 05:29:56 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:29:56 2011] Updating source flux to 4.5e-15
[Fri Oct  7 05:30:16 2011] Source 14 has fewer than 100.000000 counts, skipping spectral fitting