[Fri Oct  7 05:14:31 2011] Detection parameters:
  Position = (748.5, 788.9) = 17 46 39.46 -28 39 22.6
  Extent = 0.5" x 0.5", rotation angle = 117 degrees
  Source counts = 15.5 +/- 4.1
  Background counts = 1.5
  Rate = 0.0004 +/- 0.0001

[Fri Oct  7 05:14:38 2011] Off-axis axis estimate = 3.08'
[Fri Oct  7 05:16:53 2011] Using EEF radius (= 0.60 ")to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:16:53 2011] Initial guess for spatial extent in simple fitting = 0.60"
[Fri Oct  7 05:16:53 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.026
[Fri Oct  7 05:16:53 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 0.60"
[Fri Oct  7 05:16:56 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16.ximg exists
[Fri Oct  7 05:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16.csv
[Fri Oct  7 05:16:57 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16_1.ximg exists
[Fri Oct  7 05:16:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16.csv
[Fri Oct  7 05:16:57 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07044_pi14-548_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:17:03 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass0_tfrozen_src16.ximg exists
[Fri Oct  7 05:17:03 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Oct  7 05:17:03 2011] Fit fullrun_ccd2_acisf07044_pi14-548_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Oct  7 05:17:41 2011] Spatial fit model total counts = 24.993600, observed total counts = 25.000000
[Fri Oct  7 05:17:41 2011] Offset between fit and detection position for source 8 = 0.671861 pixels
[Fri Oct  7 05:17:41 2011] 25.724800 total counts/ 10.699600 bgd. counts: snr = 4.593424
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.671861 pixels
  Position = (748.9, 789.4) = 17 46 39.46 -28 39 22.6
  Extent = 0.6 (0.4-0.9)", rotation angle = 0
  Source counts = 15.0 +/- 5.1
  Background counts = 10.7
  Rate = 0.0004 +/- 0.0001
[Fri Oct  7 05:17:41 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:17:41 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:17:41 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:17:41 2011] Source does appear to be extended
[Fri Oct  7 05:17:41 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:18:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct  7 05:18:25 2011] Initial guess for spatial extent in simple fitting = 0.58"
[Fri Oct  7 05:18:25 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.053
[Fri Oct  7 05:18:25 2011] Giving source the simple spatial ID 16 for pass 1, mean size = 0.58"
[Fri Oct  7 05:18:27 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16.ximg exists
[Fri Oct  7 05:18:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16.csv
[Fri Oct  7 05:18:27 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16_1.ximg exists
[Fri Oct  7 05:18:27 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16.csv
[Fri Oct  7 05:18:27 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07044_pi14-548_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:18:28 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16.ximg exists
[Fri Oct  7 05:18:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16.csv
[Fri Oct  7 05:18:28 2011] fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Oct  7 05:18:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16.csv
[Fri Oct  7 05:18:28 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07044_pi14-548_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct  7 05:18:59 2011] Spatial fit model total counts = 16.625400, observed total counts = 26.000000
[Fri Oct  7 05:18:59 2011] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Oct  7 05:18:59 2011] Vigneting correction estimate = 1.000000
[Fri Oct  7 05:18:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct  7 05:18:59 2011] Assessing source extent using major axis lower bound
[Fri Oct  7 05:18:59 2011] Source does appear to be extended
[Fri Oct  7 05:18:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct  7 05:22:36 2011] Not overwriting source region fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.reg
[Fri Oct  7 05:22:36 2011] Extracting stamp from image fullrun_ccd2_acisf07044_pi14-548_cl_sm2.00.img.gz, (722, 763) - (776, 816)
[Fri Oct  7 05:22:36 2011] Writing fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8.gif
[Fri Oct  7 05:24:05 2011] ../../acisf07044/products/events/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.evt and ../../acisf07044/products/events/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_bgd.evt exist, delete to re-create
[Fri Oct  7 05:24:06 2011] Size of ../../acisf07044/products/events/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.evt.gz[events] = 17 counts
[Fri Oct  7 05:24:06 2011] Mean chipx,y = (295.76, 761.71)
[Fri Oct  7 05:24:06 2011] Mean tdetx,y = (3822.71, 3790.24)
[Fri Oct  7 05:24:06 2011] chipx,y range = (283.00-314.00, 741.00-779.00)
[Fri Oct  7 05:24:06 2011] Size of ../../acisf07044/products/events/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_bgd.evt.gz[events] = 18 counts
[Fri Oct  7 05:24:06 2011] ../../acisf07044/products/images/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.img and ../../acisf07044/products/images/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_bgd.img exist, delete to re-create
[Fri Oct  7 05:24:06 2011] ../../acisf07044/products/spectra/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.pi and ../../acisf07044/products/spectra/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_bgd.pi exist, delete to re-create
[Fri Oct  7 05:24:06 2011] Not generating rmf since there are only 15 counts
[Fri Oct  7 05:24:11 2011] ../../acisf07044/products/lightcurves/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.lc and ../../acisf07044/products/lightcurves/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_bgd.lc exist, delete to re-create
[Fri Oct  7 05:26:23 2011] 192.938
[Fri Oct  7 05:29:55 2011] Updating aperture counts using extracted products
[Fri Oct  7 05:29:55 2011] Error reading totcts from fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_src.pi.gz
[Fri Oct  7 05:29:55 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct  7 05:29:55 2011] Using photon index=1.80, rate=0.000397, arf fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8.arf
[Fri Oct  7 05:29:55 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct  7 05:29:55 2011] Updating source flux to 6.3e-15
[Fri Oct  7 05:30:15 2011] Flag p found in src. 8 procflags, skipping spectral fitting
[Fri Oct  7 05:30:15 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Oct  7 05:30:16 2011] acisf07044/analysis//spectral/fullrun_ccd2_acisf07044_pi14-548_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete