[Tue Feb 28 15:18:40 2012] Detection parameters:
  Position = (135.4, 721.0) = 17 45 22.46 -29 25 27.8
  Extent = 0.6" x 0.5", rotation angle = 126 degrees
  Source counts = 22.3 +/- 4.9
  Background counts = 1.7
  Rate = 0.0006 +/- 0.0001

[Tue Feb 28 15:18:43 2012] Off-axis axis estimate = 2.59'
[Tue Feb 28 17:10:00 2012] Using EEF radius (= 0.51 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 17:10:00 2012] Initial guess for spatial extent in simple fitting = 0.51"
[Tue Feb 28 17:10:00 2012] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.963
[Tue Feb 28 17:10:00 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 0.51"
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11.ximg exists
[Tue Feb 28 17:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11.csv
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11_1.ximg exists
[Tue Feb 28 17:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11.csv
[Tue Feb 28 17:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src11.ximg exists
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src11_1.ximg exists
[Tue Feb 28 17:35:08 2012] Fit fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src11 appears to have run properly
[Tue Feb 28 19:42:38 2012] Spatial fit model total counts = 24.088300, observed total counts = 25.000000
[Tue Feb 28 19:42:38 2012] Offset between fit and detection position for source 5 = 0.760918 pixels
[Tue Feb 28 19:42:38 2012] 24.112120 total counts/ 3.596820 bgd. counts: snr = 10.817291
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.760918 pixels
  Position = (135.8, 721.6) = 17 45 22.46 -29 25 27.7
  Extent = 0.5 (0.3-0.6)", rotation angle = 0
  Source counts = 20.5 +/- 4.9
  Background counts = 3.6
  Rate = 0.0006 +/- 0.0001
[Tue Feb 28 19:42:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 19:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 19:42:38 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 19:42:38 2012] Source does appear to be extended
[Tue Feb 28 19:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 21:14:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 21:14:17 2012] Initial guess for spatial extent in simple fitting = 0.47"
[Tue Feb 28 21:14:17 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.051
[Tue Feb 28 21:14:17 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 0.47"
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11.ximg exists
[Tue Feb 28 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11.csv
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11_1.ximg exists
[Tue Feb 28 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11.csv
[Tue Feb 28 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src11.ximg exists
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src11_1.ximg exists
[Tue Feb 28 21:35:16 2012] Fit fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src11 appears to have run properly
[Tue Feb 28 22:37:28 2012] Spatial fit model total counts = 24.359300, observed total counts = 25.000000
[Tue Feb 28 22:37:28 2012] Offset between fit and detection position for source 5 = 0.109617 pixels
[Tue Feb 28 22:37:28 2012] 24.235080 total counts/ 1.837980 bgd. counts: snr = 16.520432
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.109617 pixels
  Position = (135.8, 721.7) = 17 45 22.47 -29 25 27.6
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 22.4 +/- 4.9
  Background counts = 1.8
  Rate = 0.0006 +/- 0.0001
[Tue Feb 28 22:37:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 22:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 22:37:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 22:37:28 2012] Source does appear to be extended
[Tue Feb 28 22:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 23:24:10 2012] Writing source region out to fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5_src.reg
[Tue Feb 28 23:24:10 2012] Extracting stamp from image fullrun_ccd3_acisf07040_pi14-548_cl_sm2.00.img.gz, (111, 697) - (161, 747)
[Tue Feb 28 23:24:10 2012] Writing fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5.gif
[Tue Feb 28 23:30:16 2012] Size of ../../acisf07040/products/events/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5_src.evt.gz[events] = 23 counts
[Tue Feb 28 23:30:16 2012] Mean chipx,y = (926.83, 706.26)
[Tue Feb 28 23:30:16 2012] Mean tdetx,y = (4425.74, 3987.83)
[Tue Feb 28 23:30:16 2012] chipx,y range = (913.00-945.00, 691.00-726.00)
[Tue Feb 28 23:30:16 2012] Size of ../../acisf07040/products/events/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5_bgd.evt.gz[events] = 18 counts
[Tue Feb 28 23:30:17 2012] Not generating rmf since there are only 22 counts
[Tue Feb 28 23:30:17 2012] arf not found, will run specextract
[Tue Feb 28 23:30:43 2012] ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5.warf not found
[Tue Feb 28 23:30:43 2012] ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5.wrmf not found
[Tue Feb 28 23:30:43 2012] Removal of ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5.soff failed
[Tue Feb 28 23:45:42 2012] Spectrum 5 has only 22 counts, deleting rmf
[Tue Feb 28 23:45:42 2012] 200.579
[Tue Feb 28 23:47:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 23:47:45 2012] Error reading totcts from fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5_src.pi.gz
[Tue Feb 28 23:47:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 23:47:46 2012] Using photon index=1.80, rate=0.000611, arf fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5.arf
[Tue Feb 28 23:47:46 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 23:47:46 2012] Updating source flux to 9.4e-15
[Tue Feb 28 23:48:02 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 23:48:03 2012] acisf07040/analysis//spectral/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete