[Tue Feb 28 15:18:40 2012] Detection parameters:
  Position = (982.3, 534.4) = 17 44 50.56 -29 26 59.3
  Extent = 1.7" x 1.1", rotation angle = 55 degrees
  Source counts = 62.5 +/- 9.9
  Background counts = 35.5
  Rate = 0.002 +/- 0.0003

[Tue Feb 28 15:18:43 2012] Off-axis axis estimate = 8.47'
[Tue Feb 28 17:10:00 2012] Using EEF radius (= 3.17 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 17:10:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 17:10:00 2012] Initial guess for spatial extent in simple fitting = 3.17"
[Tue Feb 28 17:10:00 2012] source mask rpix=6.4, npix_max = 192, mask sum = 196, frac = 1.018
[Tue Feb 28 17:10:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 3.17"
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2.ximg exists
[Tue Feb 28 17:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2.csv
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2_1.ximg exists
[Tue Feb 28 17:35:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2.csv
[Tue Feb 28 17:35:08 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07040_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Tue Feb 28 17:35:08 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Feb 28 17:35:08 2012] Fit fullrun_ccd3_acisf07040_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Feb 28 19:42:38 2012] Spatial fit model total counts = 69.697700, observed total counts = 75.000000
[Tue Feb 28 19:42:38 2012] Offset between fit and detection position for source 1 = 0.668802 pixels
[Tue Feb 28 19:42:38 2012] 69.697400 total counts/ 33.383300 bgd. counts: snr = 6.285078
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.668802 pixels
  Position = (982.8, 534.8) = 17 44 50.56 -29 26 59.3
  Extent = 1.9 (1.7-2.4)", rotation angle = 0
  Source counts = 36.3 +/- 8.3
  Background counts = 33.4
  Rate = 0.001 +/- 0.0002
[Tue Feb 28 19:42:38 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 19:42:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 19:42:38 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 19:42:38 2012] Source does appear to be extended
[Tue Feb 28 19:42:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 21:14:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 21:14:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Feb 28 21:14:17 2012] Initial guess for spatial extent in simple fitting = 1.88"
[Tue Feb 28 21:14:17 2012] source mask rpix=3.8, npix_max = 74, mask sum = 81, frac = 1.082
[Tue Feb 28 21:14:17 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 1.88"
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2.ximg exists
[Tue Feb 28 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2.csv
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2_1.ximg exists
[Tue Feb 28 21:35:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2.csv
[Tue Feb 28 21:35:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07040_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Tue Feb 28 21:35:16 2012] fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Feb 28 21:35:16 2012] Fit fullrun_ccd3_acisf07040_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Feb 28 22:37:28 2012] Warning, spatial fit 2 centroid is now closest to src. 9
[Tue Feb 28 22:37:28 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 22:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 22:37:28 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 22:37:28 2012] Source does appear to be extended
[Tue Feb 28 22:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 23:24:10 2012] Writing source region out to fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1_src.reg
[Tue Feb 28 23:24:10 2012] Extracting stamp from image fullrun_ccd3_acisf07040_pi14-548_cl_sm2.00.img.gz, (897, 449) - (1069, 621)
[Tue Feb 28 23:24:10 2012] Writing fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1.gif
[Tue Feb 28 23:24:48 2012] Size of ../../acisf07040/products/events/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1_src.evt.gz[events] = 58 counts
[Tue Feb 28 23:24:48 2012] Mean chipx,y = (102.59, 428.90)
[Tue Feb 28 23:24:48 2012] Mean tdetx,y = (4703.10, 3163.59)
[Tue Feb 28 23:24:48 2012] chipx,y range = (80.00-127.00, 403.00-452.00)
[Tue Feb 28 23:24:48 2012] Size of ../../acisf07040/products/events/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 183 counts
[Tue Feb 28 23:24:49 2012] Not generating rmf since there are only 36 counts
[Tue Feb 28 23:24:49 2012] arf not found, will run specextract
[Tue Feb 28 23:25:12 2012] ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1.warf not found
[Tue Feb 28 23:25:12 2012] ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1.wrmf not found
[Tue Feb 28 23:25:12 2012] Removal of ../../acisf07040/products/spectra/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1.soff failed
[Tue Feb 28 23:45:42 2012] Spectrum 1 has only 36 counts, deleting rmf
[Tue Feb 28 23:45:42 2012] 164.573
[Tue Feb 28 23:47:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 23:47:45 2012] Error reading totcts from fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1_src.pi.gz
[Tue Feb 28 23:47:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 23:47:45 2012] Using photon index=1.80, rate=0.00099, arf fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1.arf
[Tue Feb 28 23:47:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 23:47:46 2012] Updating source flux to 1.8e-14
[Tue Feb 28 23:48:02 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 23:48:03 2012] acisf07040/analysis//spectral/fullrun_ccd3_acisf07040_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete