[Tue Feb 28 15:18:38 2012] Detection parameters:
  Position = (423.3, 667.0) = 17 45 15.81 -29 17 24.1
  Extent = 1.1" x 0.7", rotation angle = 135 degrees
  Source counts = 29.8 +/- 5.7
  Background counts = 3.2
  Rate = 0.0008 +/- 0.0002

[Tue Feb 28 15:18:39 2012] Off-axis axis estimate = 5.85'
[Tue Feb 28 16:40:49 2012] Using EEF radius (= 1.55 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 16:40:49 2012] Initial guess for spatial extent in simple fitting = 1.55"
[Tue Feb 28 16:40:49 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.045
[Tue Feb 28 16:40:49 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 1.55"
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10.ximg exists
[Tue Feb 28 17:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10.csv
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10_1.ximg exists
[Tue Feb 28 17:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10.csv
[Tue Feb 28 17:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Feb 28 17:10:00 2012] Fit fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Feb 28 19:42:35 2012] Spatial fit model total counts = 48.935500, observed total counts = 49.000000
[Tue Feb 28 19:42:35 2012] Offset between fit and detection position for source 27 = 0.577754 pixels
[Tue Feb 28 19:42:35 2012] 49.837600 total counts/ 25.290300 bgd. counts: snr = 4.881202
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.577754 pixels
  Position = (423.3, 667.6) = 17 45 15.83 -29 17 24.0
  Extent = 1.1 (0.4-1.9)", rotation angle = 0
  Source counts = 24.5 +/- 7.1
  Background counts = 25.3
  Rate = 0.0007 +/- 0.0002
[Tue Feb 28 19:42:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 19:42:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 19:42:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 19:42:35 2012] Source does appear to be extended
[Tue Feb 28 19:42:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 20:51:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 20:51:00 2012] Initial guess for spatial extent in simple fitting = 1.08"
[Tue Feb 28 20:51:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.860
[Tue Feb 28 20:51:00 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 1.08"
[Tue Feb 28 21:14:16 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10.ximg exists
[Tue Feb 28 21:14:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10.csv
[Tue Feb 28 21:14:16 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10_1.ximg exists
[Tue Feb 28 21:14:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10.csv
[Tue Feb 28 21:14:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 21:14:17 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Tue Feb 28 21:14:17 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Tue Feb 28 21:14:17 2012] Fit fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Feb 28 22:37:25 2012] Spatial fit model total counts = 45.980500, observed total counts = 46.000000
[Tue Feb 28 22:37:25 2012] Offset between fit and detection position for source 27 = 0.403332 pixels
[Tue Feb 28 22:37:25 2012] 46.980700 total counts/ 21.384100 bgd. counts: snr = 5.535244
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.403332 pixels
  Position = (423.6, 667.3) = 17 45 15.82 -29 17 24.2
  Extent = 1.1 (0.3-1.6)", rotation angle = 0
  Source counts = 25.6 +/- 6.9
  Background counts = 21.4
  Rate = 0.0007 +/- 0.0002
[Tue Feb 28 22:37:25 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 22:37:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 22:37:25 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 22:37:25 2012] Source does appear to be extended
[Tue Feb 28 22:37:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 23:06:27 2012] Writing source region out to fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27_src.reg
[Tue Feb 28 23:06:27 2012] Extracting stamp from image fullrun_ccd2_acisf07040_pi14-548_cl_sm2.00.img.gz, (372, 616) - (475, 719)
[Tue Feb 28 23:06:27 2012] Writing fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27.gif
[Tue Feb 28 23:12:28 2012] Size of ../../acisf07040/products/events/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27_src.evt.gz[events] = 45 counts
[Tue Feb 28 23:12:28 2012] Mean chipx,y = (375.22, 402.07)
[Tue Feb 28 23:12:28 2012] Mean tdetx,y = (3463.07, 3710.78)
[Tue Feb 28 23:12:28 2012] chipx,y range = (358.00-393.00, 377.00-419.00)
[Tue Feb 28 23:12:28 2012] Size of ../../acisf07040/products/events/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27_bgd.evt.gz[events] = 79 counts
[Tue Feb 28 23:12:30 2012] Not generating rmf since there are only 25 counts
[Tue Feb 28 23:12:30 2012] arf not found, will run specextract
[Tue Feb 28 23:12:55 2012] ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27.warf not found
[Tue Feb 28 23:12:55 2012] ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27.wrmf not found
[Tue Feb 28 23:12:55 2012] Removal of ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27.soff failed
[Tue Feb 28 23:24:09 2012] Spectrum 27 has only 26 counts, deleting rmf
[Tue Feb 28 23:24:09 2012] 178.723
[Tue Feb 28 23:47:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 23:47:45 2012] Error reading totcts from fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27_src.pi.gz
[Tue Feb 28 23:47:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 23:47:45 2012] Using photon index=1.80, rate=0.000698, arf fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27.arf
[Tue Feb 28 23:47:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 23:47:45 2012] Updating source flux to 1.2e-14
[Tue Feb 28 23:48:01 2012] Source 27 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 23:48:02 2012] acisf07040/analysis//spectral/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete