[Tue Feb 28 15:18:37 2012] Detection parameters:
  Position = (567.9, 297.3) = 17 45 10.36 -29 20 26.0
  Extent = 0.6" x 0.5", rotation angle = 97 degrees
  Source counts = 15.3 +/- 4.1
  Background counts = 1.7
  Rate = 0.0004 +/- 0.0001

[Tue Feb 28 15:18:39 2012] Off-axis axis estimate = 3.99'
[Tue Feb 28 16:40:49 2012] Using EEF radius (= 0.83 ")to estimate initial spatial extent for simple fitting
[Tue Feb 28 16:40:49 2012] Initial guess for spatial extent in simple fitting = 0.83"
[Tue Feb 28 16:40:49 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Tue Feb 28 16:40:49 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 0.83"
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18.ximg exists
[Tue Feb 28 17:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18.csv
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18_1.ximg exists
[Tue Feb 28 17:10:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18.csv
[Tue Feb 28 17:10:00 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07040_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Tue Feb 28 17:10:00 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Feb 28 17:10:00 2012] Fit fullrun_ccd2_acisf07040_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Feb 28 19:42:35 2012] Spatial fit model total counts = 21.999200, observed total counts = 22.000000
[Tue Feb 28 19:42:35 2012] Offset between fit and detection position for source 12 = 0.648340 pixels
[Tue Feb 28 19:42:35 2012] 22.110420 total counts/ 7.472020 bgd. counts: snr = 5.355186
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.648340 pixels
  Position = (568.5, 297.6) = 17 45 10.36 -29 20 26.1
  Extent = 0.6 (0.4-1.0)", rotation angle = 0
  Source counts = 14.6 +/- 4.7
  Background counts = 7.5
  Rate = 0.0004 +/- 0.0001
[Tue Feb 28 19:42:35 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 19:42:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 19:42:35 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 19:42:35 2012] Source does appear to be extended
[Tue Feb 28 19:42:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 20:51:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Feb 28 20:51:00 2012] Initial guess for spatial extent in simple fitting = 0.62"
[Tue Feb 28 20:51:00 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.727
[Tue Feb 28 20:51:00 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 0.62"
[Tue Feb 28 21:14:16 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17.ximg exists
[Tue Feb 28 21:14:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17.csv
[Tue Feb 28 21:14:16 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17_1.ximg exists
[Tue Feb 28 21:14:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17.csv
[Tue Feb 28 21:14:16 2012] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07040_pi14-548_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Feb 28 21:14:17 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src17.ximg exists
[Tue Feb 28 21:14:17 2012] fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src17_1.ximg exists
[Tue Feb 28 21:14:17 2012] Fit fullrun_ccd2_acisf07040_pi14-548_cl_pass1_tfrozen_src17 appears to have run properly
[Tue Feb 28 22:37:25 2012] Spatial fit model total counts = 22.007600, observed total counts = 22.000000
[Tue Feb 28 22:37:25 2012] Offset between fit and detection position for source 12 = 0.059692 pixels
[Tue Feb 28 22:37:25 2012] 21.441350 total counts/ 6.289150 bgd. counts: snr = 6.041986
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.059692 pixels
  Position = (568.5, 297.6) = 17 45 10.36 -29 20 26.0
  Extent = 0.7 (0.4-1.0)", rotation angle = 0
  Source counts = 15.2 +/- 4.6
  Background counts = 6.3
  Rate = 0.0004 +/- 0.0001
[Tue Feb 28 22:37:25 2012] Vigneting correction estimate = 1.000000
[Tue Feb 28 22:37:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Feb 28 22:37:25 2012] Assessing source extent using major axis lower bound
[Tue Feb 28 22:37:25 2012] Source does appear to be extended
[Tue Feb 28 22:37:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Feb 28 23:06:27 2012] Writing source region out to fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12_src.reg
[Tue Feb 28 23:06:27 2012] Extracting stamp from image fullrun_ccd2_acisf07040_pi14-548_cl_sm2.00.img.gz, (539, 268) - (598, 327)
[Tue Feb 28 23:06:27 2012] Writing fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12.gif
[Tue Feb 28 23:16:37 2012] Size of ../../acisf07040/products/events/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12_src.evt.gz[events] = 18 counts
[Tue Feb 28 23:16:37 2012] Mean chipx,y = (479.72, 782.33)
[Tue Feb 28 23:16:37 2012] Mean tdetx,y = (3843.33, 3606.28)
[Tue Feb 28 23:16:37 2012] chipx,y range = (464.00-498.00, 766.00-801.00)
[Tue Feb 28 23:16:37 2012] Size of ../../acisf07040/products/events/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12_bgd.evt.gz[events] = 22 counts
[Tue Feb 28 23:16:38 2012] Not generating rmf since there are only 15 counts
[Tue Feb 28 23:16:38 2012] arf not found, will run specextract
[Tue Feb 28 23:17:06 2012] ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12.warf not found
[Tue Feb 28 23:17:06 2012] ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12.wrmf not found
[Tue Feb 28 23:17:06 2012] Removal of ../../acisf07040/products/spectra/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12.soff failed
[Tue Feb 28 23:24:09 2012] Spectrum 12 has only 15 counts, deleting rmf
[Tue Feb 28 23:24:09 2012] 185.069
[Tue Feb 28 23:47:45 2012] Updating aperture counts using extracted products
[Tue Feb 28 23:47:45 2012] Error reading totcts from fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12_src.pi.gz
[Tue Feb 28 23:47:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Feb 28 23:47:45 2012] Using photon index=1.80, rate=0.000413, arf fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12.arf
[Tue Feb 28 23:47:45 2012] Assuming count rate is from the 0.20-8.00 bandpass
[Tue Feb 28 23:47:45 2012] Updating source flux to 6.8e-15
[Tue Feb 28 23:48:01 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Feb 28 23:48:02 2012] acisf07040/analysis//spectral/fullrun_ccd2_acisf07040_pi14-548_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete