[Wed Sep 21 20:17:41 2011] Detection parameters:
  Position = (921.1, 609.4) = 17 43 53.58 -29 6 29.2
  Extent = 0.6" x 0.5", rotation angle = 50 degrees
  Source counts = 30.4 +/- 5.7
  Background counts = 2.6
  Rate = 0.0008 +/- 0.0002

[Wed Sep 21 20:17:57 2011] Off-axis axis estimate = 4.76'
[Wed Sep 21 20:19:46 2011] Using EEF radius (= 1.09 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:19:46 2011] Initial guess for spatial extent in simple fitting = 1.09"
[Wed Sep 21 20:19:46 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.023
[Wed Sep 21 20:19:46 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 1.09"
[Wed Sep 21 20:19:50 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6.ximg exists
[Wed Sep 21 20:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6.csv
[Wed Sep 21 20:19:50 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6_1.ximg exists
[Wed Sep 21 20:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6.csv
[Wed Sep 21 20:19:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:19:51 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep 21 20:19:51 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep 21 20:19:51 2011] Fit fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Sep 21 20:20:13 2011] Spatial fit model total counts = 33.150000, observed total counts = 36.000000
[Wed Sep 21 20:20:13 2011] Offset between fit and detection position for source 4 = 0.986805 pixels
[Wed Sep 21 20:20:13 2011] 33.325310 total counts/ 1.131310 bgd. counts: snr = 30.268028
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.986805 pixels
  Position = (921.7, 610.2) = 17 43 53.57 -29 6 29.1
  Extent = 1.0 (0.5-1.2)", rotation angle = 0
  Source counts = 32.2 +/- 5.8
  Background counts = 1.1
  Rate = 0.0009 +/- 0.0002
[Wed Sep 21 20:20:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:20:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:20:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:20:13 2011] Source does appear to be extended
[Wed Sep 21 20:20:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:20:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:20:51 2011] Initial guess for spatial extent in simple fitting = 0.97"
[Wed Sep 21 20:20:51 2011] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.027
[Wed Sep 21 20:20:51 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 0.97"
[Wed Sep 21 20:20:53 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6.ximg exists
[Wed Sep 21 20:20:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6.csv
[Wed Sep 21 20:20:53 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6_1.ximg exists
[Wed Sep 21 20:20:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6.csv
[Wed Sep 21 20:20:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:20:54 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep 21 20:20:54 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep 21 20:20:54 2011] Fit fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Sep 21 20:21:12 2011] Spatial fit model total counts = 35.888600, observed total counts = 36.000000
[Wed Sep 21 20:21:12 2011] Offset between fit and detection position for source 4 = 0.499671 pixels
[Wed Sep 21 20:21:12 2011] 36.854100 total counts/ 11.089900 bgd. counts: snr = 7.736648
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.499671 pixels
  Position = (921.4, 609.8) = 17 43 53.58 -29 6 29.3
  Extent = 0.7 (0.5-1.1)", rotation angle = 0
  Source counts = 25.8 +/- 6.1
  Background counts = 11.1
  Rate = 0.0007 +/- 0.0002
[Wed Sep 21 20:21:12 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:21:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:21:12 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:21:12 2011] Source does appear to be extended
[Wed Sep 21 20:21:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:29:04 2011] Not overwriting source region fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.reg
[Wed Sep 21 20:29:04 2011] Extracting stamp from image fullrun_ccd3_acisf07039_pi14-548_cl_sm2.00.img.gz, (889, 577) - (954, 643)
[Wed Sep 21 20:29:04 2011] Writing fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4.gif
[Wed Sep 21 20:29:25 2011] ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.evt and ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Sep 21 20:29:25 2011] Size of ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.evt.gz[events] = 31 counts
[Wed Sep 21 20:29:25 2011] Mean chipx,y = (854.68, 436.74)
[Wed Sep 21 20:29:25 2011] Mean tdetx,y = (4695.26, 3915.68)
[Wed Sep 21 20:29:25 2011] chipx,y range = (837.00-873.00, 421.00-456.00)
[Wed Sep 21 20:29:25 2011] Size of ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_bgd.evt.gz[events] = 20 counts
[Wed Sep 21 20:29:25 2011] ../../acisf07039/products/images/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.img and ../../acisf07039/products/images/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Sep 21 20:29:25 2011] ../../acisf07039/products/spectra/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.pi and ../../acisf07039/products/spectra/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Sep 21 20:29:25 2011] Not generating rmf since there are only 25 counts
[Wed Sep 21 20:29:28 2011] ../../acisf07039/products/lightcurves/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.lc and ../../acisf07039/products/lightcurves/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Sep 21 20:31:57 2011] 186.838
[Wed Sep 21 20:32:08 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:32:08 2011] Error reading totcts from fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_src.pi.gz
[Wed Sep 21 20:32:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:32:08 2011] Using photon index=1.80, rate=0.000682, arf fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4.arf
[Wed Sep 21 20:32:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:32:08 2011] Updating source flux to 1.1e-14
[Wed Sep 21 20:32:22 2011] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 21 20:32:23 2011] acisf07039/analysis//spectral/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete