[Wed Sep 21 20:17:41 2011] Detection parameters:
  Position = (891.4, 285.1) = 17 43 54.69 -29 9 8.8
  Extent = 0.5" x 0.5", rotation angle = 25 degrees
  Source counts = 37.1 +/- 6.2
  Background counts = 1.9
  Rate = 0.001 +/- 0.0002

[Wed Sep 21 20:17:57 2011] Off-axis axis estimate = 2.18'
[Wed Sep 21 20:19:46 2011] Using EEF radius (= 0.45 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:19:46 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Wed Sep 21 20:19:46 2011] source mask rpix=0.9, npix_max = 7, mask sum = 9, frac = 1.127
[Wed Sep 21 20:19:46 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 0.45"
[Wed Sep 21 20:19:50 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5.ximg exists
[Wed Sep 21 20:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5.csv
[Wed Sep 21 20:19:50 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5_1.ximg exists
[Wed Sep 21 20:19:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5.csv
[Wed Sep 21 20:19:50 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07039_pi14-548_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:19:51 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src5.ximg exists
[Wed Sep 21 20:19:51 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src5_1.ximg exists
[Wed Sep 21 20:19:51 2011] Fit fullrun_ccd3_acisf07039_pi14-548_cl_pass0_tfrozen_src5 appears to have run properly
[Wed Sep 21 20:20:13 2011] Spatial fit model total counts = 44.918000, observed total counts = 45.000000
[Wed Sep 21 20:20:13 2011] Offset between fit and detection position for source 2 = 0.529702 pixels
[Wed Sep 21 20:20:13 2011] 45.633810 total counts/ 9.316410 bgd. counts: snr = 11.898452
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.529702 pixels
  Position = (891.8, 285.5) = 17 43 54.70 -29 9 8.8
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 36.3 +/- 6.8
  Background counts = 9.3
  Rate = 0.001 +/- 0.0002
[Wed Sep 21 20:20:13 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:20:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:20:13 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:20:13 2011] Source does appear to be extended
[Wed Sep 21 20:20:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:20:51 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:20:51 2011] Initial guess for spatial extent in simple fitting = 0.47"
[Wed Sep 21 20:20:51 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.073
[Wed Sep 21 20:20:51 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 0.47"
[Wed Sep 21 20:20:53 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5.ximg exists
[Wed Sep 21 20:20:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5.csv
[Wed Sep 21 20:20:53 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5_1.ximg exists
[Wed Sep 21 20:20:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5.csv
[Wed Sep 21 20:20:53 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07039_pi14-548_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:20:54 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5.ximg exists
[Wed Sep 21 20:20:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Sep 21 20:20:54 2011] fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Sep 21 20:20:54 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5.csv
[Wed Sep 21 20:20:54 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07039_pi14-548_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:21:12 2011] Spatial fit model total counts = 36.619200, observed total counts = 45.000000
[Wed Sep 21 20:21:12 2011] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep 21 20:21:12 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:21:12 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:21:12 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:21:12 2011] Source does appear to be extended
[Wed Sep 21 20:21:12 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:29:04 2011] Not overwriting source region fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.reg
[Wed Sep 21 20:29:04 2011] Extracting stamp from image fullrun_ccd3_acisf07039_pi14-548_cl_sm2.00.img.gz, (870, 264) - (913, 307)
[Wed Sep 21 20:29:04 2011] Writing fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2.gif
[Wed Sep 21 20:29:23 2011] ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.evt and ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Sep 21 20:29:23 2011] Size of ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.evt.gz[events] = 38 counts
[Wed Sep 21 20:29:23 2011] Mean chipx,y = (860.66, 766.39)
[Wed Sep 21 20:29:23 2011] Mean tdetx,y = (4365.61, 3921.66)
[Wed Sep 21 20:29:23 2011] chipx,y range = (842.00-875.00, 748.00-783.00)
[Wed Sep 21 20:29:23 2011] Size of ../../acisf07039/products/events/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_bgd.evt.gz[events] = 11 counts
[Wed Sep 21 20:29:23 2011] ../../acisf07039/products/images/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.img and ../../acisf07039/products/images/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Sep 21 20:29:23 2011] ../../acisf07039/products/spectra/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.pi and ../../acisf07039/products/spectra/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Sep 21 20:29:23 2011] Not generating rmf since there are only 36 counts
[Wed Sep 21 20:29:25 2011] ../../acisf07039/products/lightcurves/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.lc and ../../acisf07039/products/lightcurves/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Sep 21 20:31:57 2011] 199.055
[Wed Sep 21 20:32:08 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:32:08 2011] Error reading totcts from fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_src.pi.gz
[Wed Sep 21 20:32:08 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:32:08 2011] Using photon index=1.80, rate=0.000962, arf fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2.arf
[Wed Sep 21 20:32:08 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:32:08 2011] Updating source flux to 1.5e-14
[Wed Sep 21 20:32:22 2011] Flag p found in src. 2 procflags, skipping spectral fitting
[Wed Sep 21 20:32:22 2011] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 21 20:32:23 2011] acisf07039/analysis//spectral/fullrun_ccd3_acisf07039_pi14-548_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete