[Wed Sep 21 20:17:32 2011] Detection parameters:
  Position = (843.2, 507.0) = 17 43 17.15 -29 8 12.4
  Extent = 1.2" x 1.0", rotation angle = 169 degrees
  Source counts = 35.0 +/- 6.6
  Background counts = 8.0
  Rate = 0.0009 +/- 0.0002

[Wed Sep 21 20:17:36 2011] Off-axis axis estimate = 8.15'
[Wed Sep 21 20:19:42 2011] Using EEF radius (= 2.94 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:19:42 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:19:42 2011] Initial guess for spatial extent in simple fitting = 2.94"
[Wed Sep 21 20:19:42 2011] source mask rpix=6.0, npix_max = 167, mask sum = 169, frac = 1.010
[Wed Sep 21 20:19:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 2.94"
[Wed Sep 21 20:19:43 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1.ximg exists
[Wed Sep 21 20:19:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 20:19:43 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1_1.ximg exists
[Wed Sep 21 20:19:43 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1.csv
[Wed Sep 21 20:19:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07039_pi14-548_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:19:44 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep 21 20:19:44 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep 21 20:19:44 2011] Fit fullrun_ccd1_acisf07039_pi14-548_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep 21 20:20:05 2011] Spatial fit model total counts = 80.053100, observed total counts = 80.000000
[Wed Sep 21 20:20:05 2011] Offset between fit and detection position for source 1 = 0.527053 pixels
[Wed Sep 21 20:20:05 2011] 80.455700 total counts/ 46.247500 bgd. counts: snr = 5.030210
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.527053 pixels
  Position = (843.6, 507.4) = 17 43 17.15 -29 8 12.5
  Extent = 1.7 (1.2-2.6)", rotation angle = 0
  Source counts = 34.2 +/- 9.0
  Background counts = 46.2
  Rate = 0.0009 +/- 0.0002
[Wed Sep 21 20:20:06 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:20:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:20:06 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:20:06 2011] Source does appear to be extended
[Wed Sep 21 20:20:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:20:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:20:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Sep 21 20:20:44 2011] Initial guess for spatial extent in simple fitting = 1.74"
[Wed Sep 21 20:20:44 2011] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.979
[Wed Sep 21 20:20:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 1.74"
[Wed Sep 21 20:20:48 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1.ximg exists
[Wed Sep 21 20:20:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 20:20:48 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1_1.ximg exists
[Wed Sep 21 20:20:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1.csv
[Wed Sep 21 20:20:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07039_pi14-548_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:20:50 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep 21 20:20:50 2011] fullrun_ccd1_acisf07039_pi14-548_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep 21 20:20:50 2011] Fit fullrun_ccd1_acisf07039_pi14-548_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep 21 20:21:06 2011] Spatial fit model total counts = 52.987600, observed total counts = 53.000000
[Wed Sep 21 20:21:06 2011] Offset between fit and detection position for source 1 = 0.346514 pixels
[Wed Sep 21 20:21:06 2011] 52.687900 total counts/ 21.859100 bgd. counts: snr = 6.593872
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.346514 pixels
  Position = (843.5, 507.8) = 17 43 17.16 -29 8 12.3
  Extent = 1.6 (1.2-2.7)", rotation angle = 0
  Source counts = 30.8 +/- 7.3
  Background counts = 21.9
  Rate = 0.0008 +/- 0.0002
[Wed Sep 21 20:21:06 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:21:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:21:06 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:21:06 2011] Source does appear to be extended
[Wed Sep 21 20:21:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:23:47 2011] Not overwriting source region fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.reg
[Wed Sep 21 20:23:47 2011] Extracting stamp from image fullrun_ccd1_acisf07039_pi14-548_cl_sm2.00.img.gz, (771, 436) - (916, 580)
[Wed Sep 21 20:23:47 2011] Writing fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1.gif
[Wed Sep 21 20:23:57 2011] ../../acisf07039/products/events/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.evt and ../../acisf07039/products/events/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Sep 21 20:23:57 2011] Size of ../../acisf07039/products/events/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.evt.gz[events] = 48 counts
[Wed Sep 21 20:23:57 2011] Mean chipx,y = (795.17, 542.23)
[Wed Sep 21 20:23:57 2011] Mean tdetx,y = (4589.77, 4902.17)
[Wed Sep 21 20:23:57 2011] chipx,y range = (777.00-819.00, 525.00-564.00)
[Wed Sep 21 20:23:57 2011] Size of ../../acisf07039/products/events/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 107 counts
[Wed Sep 21 20:23:57 2011] ../../acisf07039/products/images/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.img and ../../acisf07039/products/images/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Sep 21 20:23:57 2011] ../../acisf07039/products/spectra/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.pi and ../../acisf07039/products/spectra/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Sep 21 20:23:57 2011] Not generating rmf since there are only 30 counts
[Wed Sep 21 20:24:01 2011] ../../acisf07039/products/lightcurves/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.lc and ../../acisf07039/products/lightcurves/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Sep 21 20:26:47 2011] 171.537
[Wed Sep 21 20:32:06 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:32:06 2011] Error reading totcts from fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Sep 21 20:32:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:32:06 2011] Using photon index=1.80, rate=0.000816, arf fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1.arf
[Wed Sep 21 20:32:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:32:06 2011] Updating source flux to 1.4e-14
[Wed Sep 21 20:32:20 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Sep 21 20:32:21 2011] acisf07039/analysis//spectral/fullrun_ccd1_acisf07039_pi14-548_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete