[Wed Sep 21 20:17:25 2011] Detection parameters:
  Position = (901.5, 835.4) = 17 43 19.44 -29 13 59.6
  Extent = 1.8" x 1.5", rotation angle = 163 degrees
  Source counts = 357.2 +/- 19.7
  Background counts = 29.8
  Rate = 0.009 +/- 0.0005

[Wed Sep 21 20:17:31 2011] Off-axis axis estimate = 7.59'
[Wed Sep 21 20:19:36 2011] Using EEF radius (= 2.55 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:19:36 2011] Initial guess for spatial extent in simple fitting = 2.55"
[Wed Sep 21 20:19:36 2011] source mask rpix=5.2, npix_max = 129, mask sum = 121, frac = 0.937
[Wed Sep 21 20:19:36 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 2.55"
[Wed Sep 21 20:19:36 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3.ximg exists
[Wed Sep 21 20:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 20:19:37 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3_1.ximg exists
[Wed Sep 21 20:19:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3.csv
[Wed Sep 21 20:19:37 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07039_pi14-548_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:19:41 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass0_tfrozen_src3.ximg exists
[Wed Sep 21 20:19:42 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Sep 21 20:19:42 2011] Fit fullrun_ccd0_acisf07039_pi14-548_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Sep 21 20:20:03 2011] Spatial fit model total counts = 388.730000, observed total counts = 391.000000
[Wed Sep 21 20:20:03 2011] Offset between fit and detection position for source 3 = 0.743056 pixels
[Wed Sep 21 20:20:03 2011] 388.857400 total counts/ 13.275400 bgd. counts: snr = 103.081555
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.743056 pixels
  Position = (901.9, 836.1) = 17 43 19.44 -29 13 59.6
  Extent = 2.5 (2.3-2.7)", rotation angle = 0
  Source counts = 375.6 +/- 19.7
  Background counts = 13.3
  Rate = 0.01 +/- 0.0005
[Wed Sep 21 20:20:03 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:20:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:20:03 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:20:03 2011] Source does appear to be extended
[Wed Sep 21 20:20:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:20:43 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 20:20:43 2011] Initial guess for spatial extent in simple fitting = 2.48"
[Wed Sep 21 20:20:43 2011] source mask rpix=5.0, npix_max = 123, mask sum = 121, frac = 0.983
[Wed Sep 21 20:20:43 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 2.48"
[Wed Sep 21 20:20:43 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3.ximg exists
[Wed Sep 21 20:20:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 20:20:43 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3_1.ximg exists
[Wed Sep 21 20:20:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3.csv
[Wed Sep 21 20:20:43 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_ccd0_acisf07039_pi14-548_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 20:20:44 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass1_tfrozen_src3.ximg exists
[Wed Sep 21 20:20:44 2011] fullrun_ccd0_acisf07039_pi14-548_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Sep 21 20:20:44 2011] Fit fullrun_ccd0_acisf07039_pi14-548_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Sep 21 20:21:04 2011] Spatial fit model total counts = 390.802000, observed total counts = 391.000000
[Wed Sep 21 20:21:04 2011] Offset between fit and detection position for source 3 = 0.026030 pixels
[Wed Sep 21 20:21:04 2011] 390.824300 total counts/ 20.097300 bgd. counts: snr = 82.696163
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.026030 pixels
  Position = (901.9, 836.1) = 17 43 19.44 -29 13 59.6
  Extent = 2.4 (2.2-2.7)", rotation angle = 0
  Source counts = 370.7 +/- 19.8
  Background counts = 20.1
  Rate = 0.01 +/- 0.0005
[Wed Sep 21 20:21:04 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 20:21:04 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 20:21:04 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 20:21:04 2011] Source does appear to be extended
[Wed Sep 21 20:21:04 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 20:21:41 2011] Not overwriting source region fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.reg
[Wed Sep 21 20:21:41 2011] Extracting stamp from image fullrun_ccd0_acisf07039_pi14-548_cl_sm2.00.img.gz, (790, 725) - (1013, 947)
[Wed Sep 21 20:21:41 2011] Writing fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3.gif
[Wed Sep 21 20:21:49 2011] ../../acisf07039/products/events/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.evt and ../../acisf07039/products/events/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_bgd.evt exist, delete to re-create
[Wed Sep 21 20:21:50 2011] Size of ../../acisf07039/products/events/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.evt.gz[events] = 404 counts
[Wed Sep 21 20:21:50 2011] Mean chipx,y = (213.11, 813.72)
[Wed Sep 21 20:21:50 2011] Mean tdetx,y = (3874.72, 4918.89)
[Wed Sep 21 20:21:50 2011] chipx,y range = (180.00-241.00, 782.00-844.00)
[Wed Sep 21 20:21:50 2011] Size of ../../acisf07039/products/events/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_bgd.evt.gz[events] = 279 counts
[Wed Sep 21 20:21:50 2011] ../../acisf07039/products/images/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.img and ../../acisf07039/products/images/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_bgd.img exist, delete to re-create
[Wed Sep 21 20:21:50 2011] ../../acisf07039/products/spectra/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.pi and ../../acisf07039/products/spectra/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_bgd.pi exist, delete to re-create
[Wed Sep 21 20:21:53 2011] ../../acisf07039/products/lightcurves/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.lc and ../../acisf07039/products/lightcurves/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_bgd.lc exist, delete to re-create
[Wed Sep 21 20:23:39 2011] Keeping rmf generated by specextract
[Wed Sep 21 20:23:39 2011] 174.434
[Wed Sep 21 20:32:05 2011] Updating aperture counts using extracted products
[Wed Sep 21 20:32:05 2011] Error reading totcts from fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_src.pi.gz
[Wed Sep 21 20:32:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:32:06 2011] Using photon index=1.80, rate=0.00981, arf fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3.arf
[Wed Sep 21 20:32:06 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:32:06 2011] Updating source flux to 1.7e-13
[Wed Sep 21 20:32:20 2011] Reading fit data from acisf07039/analysis//spectral/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_pl.csv
[Wed Sep 21 20:32:20 2011] Spectral fit parameter nH value = 1.52477e+22
[Wed Sep 21 20:32:20 2011] Spectral fit parameter PhoIndex value = 3.13275
[Wed Sep 21 20:32:20 2011] Failed to get F(0.3-8.0) from acisf07039/analysis//spectral/fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Sep 21 20:32:20 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 20:32:20 2011] Using Nh = 1.5e+22, photon index=3.13, rate=0.00981, arf fullrun_ccd0_acisf07039_pi14-548_pass1_cl_src3.arf
[Wed Sep 21 20:32:20 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 20:32:20 2011] Updating source flux to 1.1e-13