[Wed Oct  5 00:53:31 2011] Detection parameters:
  Position = (637.4, 790.6) = 17 44 41.72 -29 3 21.9
  Extent = 1.2" x 0.6", rotation angle = 89 degrees
  Source counts = 95.6 +/- 9.9
  Background counts = 3.4
  Rate = 0.005 +/- 0.0005

[Wed Oct  5 00:53:36 2011] Off-axis axis estimate = 4.83'
[Wed Oct  5 00:57:05 2011] Using EEF radius (= 1.11 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 00:57:05 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 00:57:05 2011] Initial guess for spatial extent in simple fitting = 1.11"
[Wed Oct  5 00:57:05 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.818
[Wed Oct  5 00:57:05 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 1.11"
[Wed Oct  5 00:57:06 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2.ximg exists
[Wed Oct  5 00:57:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 00:57:06 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2_1.ximg exists
[Wed Oct  5 00:57:06 2011] Warning: model total counts is not > 0 in csv/fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2.csv
[Wed Oct  5 00:57:06 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07036_pi14-548_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 00:57:06 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass0_tfrozen_src2.ximg exists
[Wed Oct  5 00:57:06 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Oct  5 00:57:06 2011] Fit fullrun_ccd2_acisf07036_pi14-548_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Oct  5 00:57:25 2011] Spatial fit model total counts = 98.385000, observed total counts = 99.000000
[Wed Oct  5 00:57:25 2011] Offset between fit and detection position for source 1 = 0.604157 pixels
[Wed Oct  5 00:57:25 2011] 100.049500 total counts/ 20.787100 bgd. counts: snr = 17.384823
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.604157 pixels
  Position = (637.8, 791.1) = 17 44 41.73 -29 3 21.9
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 79.3 +/- 10.0
  Background counts = 20.8
  Rate = 0.004 +/- 0.0005
[Wed Oct  5 00:57:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 00:57:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 00:57:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 00:57:25 2011] Source does appear to be extended
[Wed Oct  5 00:57:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 00:58:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 00:58:07 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 00:58:07 2011] Initial guess for spatial extent in simple fitting = 0.99"
[Wed Oct  5 00:58:07 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.986
[Wed Oct  5 00:58:07 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 0.99"
[Wed Oct  5 00:58:08 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2.ximg exists
[Wed Oct  5 00:58:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 00:58:08 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2_1.ximg exists
[Wed Oct  5 00:58:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2.csv
[Wed Oct  5 00:58:08 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07036_pi14-548_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 00:58:09 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass1_tfrozen_src2.ximg exists
[Wed Oct  5 00:58:09 2011] fullrun_ccd2_acisf07036_pi14-548_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Oct  5 00:58:09 2011] Fit fullrun_ccd2_acisf07036_pi14-548_cl_pass1_tfrozen_src2 appears to have run properly
[Wed Oct  5 00:58:25 2011] Spatial fit model total counts = 98.910000, observed total counts = 99.000000
[Wed Oct  5 00:58:25 2011] Offset between fit and detection position for source 1 = 0.019673 pixels
[Wed Oct  5 00:58:25 2011] 100.301400 total counts/ 18.239100 bgd. counts: snr = 19.215071
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.019673 pixels
  Position = (637.8, 791.1) = 17 44 41.72 -29 3 21.9
  Extent = 1.0 (0.8-1.2)", rotation angle = 0
  Source counts = 82.1 +/- 10.0
  Background counts = 18.2
  Rate = 0.004 +/- 0.0005
[Wed Oct  5 00:58:25 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 00:58:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 00:58:25 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 00:58:25 2011] Source does appear to be extended
[Wed Oct  5 00:58:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 01:24:04 2011] Not overwriting source region fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.reg
[Wed Oct  5 01:24:04 2011] Extracting stamp from image fullrun_ccd2_acisf07036_pi14-548_cl_sm2.00.img.gz, (591, 744) - (684, 838)
[Wed Oct  5 01:24:04 2011] Writing fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1.gif
[Wed Oct  5 01:25:24 2011] ../../acisf07036/products/events/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.evt and ../../acisf07036/products/events/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Oct  5 01:25:24 2011] Size of ../../acisf07036/products/events/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.evt.gz[events] = 97 counts
[Wed Oct  5 01:25:24 2011] Mean chipx,y = (528.09, 677.43)
[Wed Oct  5 01:25:24 2011] Mean tdetx,y = (3738.43, 3557.91)
[Wed Oct  5 01:25:24 2011] chipx,y range = (510.00-544.00, 658.00-701.00)
[Wed Oct  5 01:25:24 2011] Size of ../../acisf07036/products/events/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_bgd.evt.gz[events] = 30 counts
[Wed Oct  5 01:25:24 2011] ../../acisf07036/products/images/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.img and ../../acisf07036/products/images/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Oct  5 01:25:24 2011] ../../acisf07036/products/spectra/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.pi and ../../acisf07036/products/spectra/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Oct  5 01:25:24 2011] Not generating rmf since there are only 82 counts
[Wed Oct  5 01:26:32 2011] ../../acisf07036/products/lightcurves/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.lc and ../../acisf07036/products/lightcurves/fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Oct  5 01:58:52 2011] 163.79
[Wed Oct  5 02:37:58 2011] Updating aperture counts using extracted products
[Wed Oct  5 02:37:59 2011] Error reading totcts from fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1_src.pi.gz
[Wed Oct  5 02:38:00 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 02:38:00 2011] Using photon index=1.80, rate=0.00412, arf fullrun_ccd2_acisf07036_pi14-548_pass1_cl_src1.arf
[Wed Oct  5 02:38:00 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Oct  5 02:38:00 2011] Updating source flux to 7.6e-14
[Wed Oct  5 02:38:11 2011] Source 1 has fewer than 100.000000 counts, skipping spectral fitting