[Fri Oct 28 05:47:14 2011] Detection parameters:
  Position = (696.6, 119.5) = 17 44 25.47 -28 49 19.5
  Extent = 1.1" x 0.7", rotation angle = 90 degrees
  Source counts = 17.2 +/- 4.5
  Background counts = 2.8
  Rate = 0.0004 +/- 0.0001

[Fri Oct 28 05:47:17 2011] Off-axis axis estimate = 5.11'
[Fri Oct 28 05:48:47 2011] Using EEF radius (= 1.22 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:48:47 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Fri Oct 28 05:48:47 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.007
[Fri Oct 28 05:48:47 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 1.22"
[Fri Oct 28 05:48:48 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18.ximg exists
[Fri Oct 28 05:48:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18.csv
[Fri Oct 28 05:48:48 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18_1.ximg exists
[Fri Oct 28 05:48:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18.csv
[Fri Oct 28 05:48:48 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07034_pi14-548_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:48:49 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass0_tfrozen_src18.ximg exists
[Fri Oct 28 05:48:49 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Oct 28 05:48:49 2011] Fit fullrun_ccd2_acisf07034_pi14-548_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Oct 28 05:49:18 2011] Spatial fit model total counts = 20.603400, observed total counts = 21.000000
[Fri Oct 28 05:49:18 2011] Offset between fit and detection position for source 22 = 1.168715 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 1.168715 pixels
  Position = (697.2, 120.6) = 17 44 25.46 -28 49 19.2
  Extent = 1.2 (0.6-1.7)", rotation angle = 0
  Source counts = 19.9 +/- 4.5
  Background counts = 0.0
  Rate = 0.0005 +/- 0.0001
[Fri Oct 28 05:49:18 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:49:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:49:18 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:49:18 2011] Source does appear to be extended
[Fri Oct 28 05:49:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:49:57 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:49:57 2011] Initial guess for spatial extent in simple fitting = 1.22"
[Fri Oct 28 05:49:57 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Fri Oct 28 05:49:57 2011] Giving source the simple spatial ID 18 for pass 1, mean size = 1.22"
[Fri Oct 28 05:49:59 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18.ximg exists
[Fri Oct 28 05:49:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18.csv
[Fri Oct 28 05:49:59 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18_1.ximg exists
[Fri Oct 28 05:49:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18.csv
[Fri Oct 28 05:49:59 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_ccd2_acisf07034_pi14-548_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:50:00 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass1_tfrozen_src18.ximg exists
[Fri Oct 28 05:50:00 2011] fullrun_ccd2_acisf07034_pi14-548_cl_pass1_tfrozen_src18_1.ximg exists
[Fri Oct 28 05:50:00 2011] Fit fullrun_ccd2_acisf07034_pi14-548_cl_pass1_tfrozen_src18 appears to have run properly
[Fri Oct 28 05:50:24 2011] Spatial fit model total counts = 21.509100, observed total counts = 22.000000
[Fri Oct 28 05:50:24 2011] Offset between fit and detection position for source 22 = 0.490954 pixels
[Fri Oct 28 05:50:24 2011] 20.441200 total counts/ 5.317300 bgd. counts: snr = 6.558707
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.490954 pixels
  Position = (697.7, 120.7) = 17 44 25.45 -28 49 19.1
  Extent = 0.9 (0.5-1.5)", rotation angle = 0
  Source counts = 15.1 +/- 4.5
  Background counts = 5.3
  Rate = 0.0004 +/- 0.0001
[Fri Oct 28 05:50:24 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:50:24 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:50:24 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:50:24 2011] Source does appear to be extended
[Fri Oct 28 05:50:24 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:55:12 2011] Not overwriting source region fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.reg
[Fri Oct 28 05:55:12 2011] Extracting stamp from image fullrun_ccd2_acisf07034_pi14-548_cl_sm2.00.img.gz, (655, 78) - (741, 164)
[Fri Oct 28 05:55:13 2011] Writing fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22.gif
[Fri Oct 28 05:56:06 2011] ../../acisf07034/products/events/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.evt and ../../acisf07034/products/events/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_bgd.evt exist, delete to re-create
[Fri Oct 28 05:56:06 2011] Size of ../../acisf07034/products/events/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.evt.gz[events] = 20 counts
[Fri Oct 28 05:56:06 2011] Mean chipx,y = (682.00, 925.35)
[Fri Oct 28 05:56:06 2011] Mean tdetx,y = (3986.35, 3404.00)
[Fri Oct 28 05:56:06 2011] chipx,y range = (667.00-701.00, 909.00-946.00)
[Fri Oct 28 05:56:06 2011] Size of ../../acisf07034/products/events/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_bgd.evt.gz[events] = 38 counts
[Fri Oct 28 05:56:06 2011] ../../acisf07034/products/images/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.img and ../../acisf07034/products/images/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_bgd.img exist, delete to re-create
[Fri Oct 28 05:56:06 2011] ../../acisf07034/products/spectra/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.pi and ../../acisf07034/products/spectra/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_bgd.pi exist, delete to re-create
[Fri Oct 28 05:56:06 2011] Not generating rmf since there are only 15 counts
[Fri Oct 28 05:56:09 2011] ../../acisf07034/products/lightcurves/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.lc and ../../acisf07034/products/lightcurves/fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_bgd.lc exist, delete to re-create
[Fri Oct 28 05:57:28 2011] 162.788
[Fri Oct 28 06:00:17 2011] Updating aperture counts using extracted products
[Fri Oct 28 06:00:17 2011] Error reading totcts from fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22_src.pi.gz
[Fri Oct 28 06:00:17 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 06:00:17 2011] Using photon index=1.80, rate=0.000382, arf fullrun_ccd2_acisf07034_pi14-548_pass1_cl_src22.arf
[Fri Oct 28 06:00:17 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 06:00:17 2011] Updating source flux to 7e-15
[Fri Oct 28 06:00:55 2011] Source 22 has fewer than 100.000000 counts, skipping spectral fitting