[Fri Oct 28 05:47:11 2011] Detection parameters:
  Position = (1019.7, 976.1) = 17 44 53.17 -28 50 42.0
  Extent = 0.5" x 0.5", rotation angle = 52 degrees
  Source counts = 38.2 +/- 6.3
  Background counts = 1.8
  Rate = 0.001 +/- 0.0002

[Fri Oct 28 05:47:13 2011] Off-axis axis estimate = 1.13'
[Fri Oct 28 05:48:43 2011] Using EEF radius (= 0.38 ")to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:48:43 2011] Initial guess for spatial extent in simple fitting = 0.38"
[Fri Oct 28 05:48:43 2011] source mask rpix=0.8, npix_max = 6, mask sum = 6, frac = 0.924
[Fri Oct 28 05:48:43 2011] Giving source the simple spatial ID 10 for pass 0, mean size = 0.38"
[Fri Oct 28 05:48:45 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10.ximg exists
[Fri Oct 28 05:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10.csv
[Fri Oct 28 05:48:45 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10_1.ximg exists
[Fri Oct 28 05:48:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10.csv
[Fri Oct 28 05:48:45 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07034_pi14-548_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:48:46 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass0_tfrozen_src10.ximg exists
[Fri Oct 28 05:48:46 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass0_tfrozen_src10_1.ximg exists
[Fri Oct 28 05:48:46 2011] Fit fullrun_ccd1_acisf07034_pi14-548_cl_pass0_tfrozen_src10 appears to have run properly
[Fri Oct 28 05:49:14 2011] Spatial fit model total counts = 42.865400, observed total counts = 43.000000
[Fri Oct 28 05:49:14 2011] Offset between fit and detection position for source 49 = 0.630145 pixels
[Fri Oct 28 05:49:14 2011] 43.156910 total counts/ 4.087410 bgd. counts: snr = 19.324744
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.630145 pixels
  Position = (1020.1, 976.6) = 17 44 53.17 -28 50 42.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 39.1 +/- 6.6
  Background counts = 4.1
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 05:49:14 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:49:14 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:49:14 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:49:14 2011] Source does appear to be extended
[Fri Oct 28 05:49:14 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:49:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Oct 28 05:49:53 2011] Initial guess for spatial extent in simple fitting = 0.55"
[Fri Oct 28 05:49:53 2011] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.160
[Fri Oct 28 05:49:53 2011] Giving source the simple spatial ID 10 for pass 1, mean size = 0.55"
[Fri Oct 28 05:49:55 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10.ximg exists
[Fri Oct 28 05:49:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 05:49:55 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10_1.ximg exists
[Fri Oct 28 05:49:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10.csv
[Fri Oct 28 05:49:55 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_ccd1_acisf07034_pi14-548_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Oct 28 05:49:56 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass1_tfrozen_src10.ximg exists
[Fri Oct 28 05:49:56 2011] fullrun_ccd1_acisf07034_pi14-548_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Oct 28 05:49:56 2011] Fit fullrun_ccd1_acisf07034_pi14-548_cl_pass1_tfrozen_src10 appears to have run properly
[Fri Oct 28 05:50:20 2011] Spatial fit model total counts = 42.961400, observed total counts = 43.000000
[Fri Oct 28 05:50:20 2011] Offset between fit and detection position for source 49 = 0.003895 pixels
[Fri Oct 28 05:50:20 2011] 43.185220 total counts/ 4.061520 bgd. counts: snr = 19.413133
Spatial fit parameters:
  Offset between fit and detection position for source 49 = 0.003895 pixels
  Position = (1020.1, 976.6) = 17 44 53.17 -28 50 42.0
  Extent = 0.5 (0.4-0.6)", rotation angle = 0
  Source counts = 39.1 +/- 6.6
  Background counts = 4.1
  Rate = 0.001 +/- 0.0002
[Fri Oct 28 05:50:20 2011] Vigneting correction estimate = 1.000000
[Fri Oct 28 05:50:20 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Oct 28 05:50:20 2011] Assessing source extent using major axis lower bound
[Fri Oct 28 05:50:20 2011] Source does appear to be extended
[Fri Oct 28 05:50:20 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Oct 28 05:52:27 2011] Not overwriting source region fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.reg
[Fri Oct 28 05:52:27 2011] Extracting stamp from image fullrun_ccd1_acisf07034_pi14-548_cl_sm2.00.img.gz, (995, 952) - (1045, 1001)
[Fri Oct 28 05:52:27 2011] Writing fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49.gif
[Fri Oct 28 05:52:58 2011] ../../acisf07034/products/events/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.evt and ../../acisf07034/products/events/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_bgd.evt exist, delete to re-create
[Fri Oct 28 05:52:58 2011] Size of ../../acisf07034/products/events/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.evt.gz[events] = 40 counts
[Fri Oct 28 05:52:58 2011] Mean chipx,y = (32.35, 964.12)
[Fri Oct 28 05:52:58 2011] Mean tdetx,y = (4167.88, 4139.35)
[Fri Oct 28 05:52:58 2011] chipx,y range = (15.00-49.00, 948.00-983.00)
[Fri Oct 28 05:52:58 2011] Size of ../../acisf07034/products/events/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_bgd.evt.gz[events] = 29 counts
[Fri Oct 28 05:52:58 2011] ../../acisf07034/products/images/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.img and ../../acisf07034/products/images/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_bgd.img exist, delete to re-create
[Fri Oct 28 05:52:58 2011] ../../acisf07034/products/spectra/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.pi and ../../acisf07034/products/spectra/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_bgd.pi exist, delete to re-create
[Fri Oct 28 05:52:58 2011] Not generating rmf since there are only 39 counts
[Fri Oct 28 05:53:01 2011] ../../acisf07034/products/lightcurves/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.lc and ../../acisf07034/products/lightcurves/fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_bgd.lc exist, delete to re-create
[Fri Oct 28 05:55:11 2011] 204.117
[Fri Oct 28 06:00:16 2011] Updating aperture counts using extracted products
[Fri Oct 28 06:00:16 2011] Error reading totcts from fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49_src.pi.gz
[Fri Oct 28 06:00:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Oct 28 06:00:16 2011] Using photon index=1.80, rate=0.000988, arf fullrun_ccd1_acisf07034_pi14-548_pass1_cl_src49.arf
[Fri Oct 28 06:00:16 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Fri Oct 28 06:00:16 2011] Updating source flux to 1.5e-14
[Fri Oct 28 06:00:29 2011] Source 49 has fewer than 100.000000 counts, skipping spectral fitting