[Wed Sep 21 08:15:14 2011] Detection parameters:
  Position = (657.2, 602.6) = 2 33 28.57 61 25 26.7
  Extent = 1.9" x 0.8", rotation angle = 130 degrees
  Source counts = 30.5 +/- 6.2
  Background counts = 7.5
  Rate = 0.0004 +/- 8e-05

[Wed Sep 21 08:15:20 2011] Off-axis axis estimate = 6.08'
[Wed Sep 21 08:17:35 2011] Using EEF radius (= 1.67 ")to estimate initial spatial extent for simple fitting
[Wed Sep 21 08:17:35 2011] Initial guess for spatial extent in simple fitting = 1.67"
[Wed Sep 21 08:17:35 2011] source mask rpix=3.4, npix_max = 60, mask sum = 64, frac = 1.054
[Wed Sep 21 08:17:35 2011] Giving source the simple spatial ID 49 for pass 0, mean size = 1.67"
[Wed Sep 21 08:17:39 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49.ximg exists
[Wed Sep 21 08:17:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49.csv
[Wed Sep 21 08:17:39 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49_1.ximg exists
[Wed Sep 21 08:17:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49.csv
[Wed Sep 21 08:17:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07033_pi14-548_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 08:17:41 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass0_tfrozen_src49.ximg exists
[Wed Sep 21 08:17:41 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass0_tfrozen_src49_1.ximg exists
[Wed Sep 21 08:17:41 2011] Fit fullrun_ccd3_acisf07033_pi14-548_cl_pass0_tfrozen_src49 appears to have run properly
[Wed Sep 21 08:18:31 2011] Spatial fit model total counts = 38.999900, observed total counts = 39.000000
[Wed Sep 21 08:18:31 2011] Offset between fit and detection position for source 105 = 1.575264 pixels
[Wed Sep 21 08:18:31 2011] 39.548100 total counts/ 20.371700 bgd. counts: snr = 4.248674
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 1.575264 pixels
  Position = (656.8, 604.2) = 2 33 28.63 61 25 27.2
  Extent = 0.8 (0.5-1.5)", rotation angle = 0
  Source counts = 19.2 +/- 6.3
  Background counts = 20.4
  Rate = 0.0002 +/- 8e-05
[Wed Sep 21 08:18:31 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 08:18:31 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 08:18:31 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 08:18:31 2011] Source does appear to be extended
[Wed Sep 21 08:18:31 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 08:19:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep 21 08:19:34 2011] Initial guess for spatial extent in simple fitting = 0.82"
[Wed Sep 21 08:19:34 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Wed Sep 21 08:19:34 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 0.82"
[Wed Sep 21 08:19:39 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49.ximg exists
[Wed Sep 21 08:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49.csv
[Wed Sep 21 08:19:39 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49_1.ximg exists
[Wed Sep 21 08:19:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49.csv
[Wed Sep 21 08:19:39 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07033_pi14-548_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep 21 08:19:43 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass1_tfrozen_src49.ximg exists
[Wed Sep 21 08:19:43 2011] fullrun_ccd3_acisf07033_pi14-548_cl_pass1_tfrozen_src49_1.ximg exists
[Wed Sep 21 08:19:43 2011] Fit fullrun_ccd3_acisf07033_pi14-548_cl_pass1_tfrozen_src49 appears to have run properly
[Wed Sep 21 08:20:33 2011] Spatial fit model total counts = 34.424900, observed total counts = 35.000000
[Wed Sep 21 08:20:33 2011] Offset between fit and detection position for source 105 = 0.142471 pixels
[Wed Sep 21 08:20:33 2011] 35.614400 total counts/ 19.091000 bgd. counts: snr = 3.781683
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 0.142471 pixels
  Position = (656.7, 604.3) = 2 33 28.64 61 25 27.2
  Extent = 0.7 (0.5-1.2)", rotation angle = 0
  Source counts = 16.5 +/- 6.0
  Background counts = 19.1
  Rate = 0.0002 +/- 8e-05
[Wed Sep 21 08:20:33 2011] Vigneting correction estimate = 1.000000
[Wed Sep 21 08:20:33 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep 21 08:20:33 2011] Assessing source extent using major axis lower bound
[Wed Sep 21 08:20:33 2011] Source does appear to be extended
[Wed Sep 21 08:20:33 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep 21 08:34:51 2011] Not overwriting source region fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.reg
[Wed Sep 21 08:34:51 2011] Extracting stamp from image fullrun_ccd3_acisf07033_pi14-548_cl_sm2.00.img.gz, (624, 571) - (690, 637)
[Wed Sep 21 08:34:51 2011] Writing fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105.gif
[Wed Sep 21 08:38:25 2011] ../../acisf07033/products/events/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.evt and ../../acisf07033/products/events/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_bgd.evt exist, delete to re-create
[Wed Sep 21 08:38:25 2011] Size of ../../acisf07033/products/events/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.evt.gz[events] = 26 counts
[Wed Sep 21 08:38:25 2011] Mean chipx,y = (386.42, 539.69)
[Wed Sep 21 08:38:25 2011] Mean tdetx,y = (4592.31, 3447.42)
[Wed Sep 21 08:38:25 2011] chipx,y range = (372.00-405.00, 519.00-556.00)
[Wed Sep 21 08:38:25 2011] Size of ../../acisf07033/products/events/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_bgd.evt.gz[events] = 31 counts
[Wed Sep 21 08:38:25 2011] ../../acisf07033/products/images/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.img and ../../acisf07033/products/images/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_bgd.img exist, delete to re-create
[Wed Sep 21 08:38:25 2011] ../../acisf07033/products/spectra/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.pi and ../../acisf07033/products/spectra/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_bgd.pi exist, delete to re-create
[Wed Sep 21 08:38:25 2011] Not generating rmf since there are only 16 counts
[Wed Sep 21 08:38:28 2011] ../../acisf07033/products/lightcurves/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.lc and ../../acisf07033/products/lightcurves/fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_bgd.lc exist, delete to re-create
[Wed Sep 21 08:42:56 2011] 176.486
[Wed Sep 21 08:43:16 2011] Updating aperture counts using extracted products
[Wed Sep 21 08:43:16 2011] Error reading totcts from fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105_src.pi.gz
[Wed Sep 21 08:43:18 2011] Calculating source flux in energy range 0.30-8.00
[Wed Sep 21 08:43:18 2011] Using photon index=1.80, rate=0.000209, arf fullrun_ccd3_acisf07033_pi14-548_pass1_cl_src105.arf
[Wed Sep 21 08:43:18 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Wed Sep 21 08:43:18 2011] Updating source flux to 3.2e-15
[Wed Sep 21 08:44:21 2011] Source 105 has fewer than 100.000000 counts, skipping spectral fitting