[Sat Sep 24 17:23:52 2011] Detection parameters:
  Position = (478.8, 248.1) = 14 51 45.93 58 10 7.1
  Extent = 0.5" x 0.5", rotation angle = 32 degrees
  Source counts = 19.9 +/- 4.6
  Background counts = 1.1
  Rate = 0.0004 +/- 9e-05

[Sat Sep 24 17:23:54 2011] Off-axis axis estimate = 1.61'
[Sat Sep 24 17:25:10 2011] Using EEF radius (= 0.40 ")to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:25:10 2011] Initial guess for spatial extent in simple fitting = 0.40"
[Sat Sep 24 17:25:10 2011] source mask rpix=0.8, npix_max = 6, mask sum = 4, frac = 0.582
[Sat Sep 24 17:25:10 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 0.40"
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13.ximg exists
[Sat Sep 24 17:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13.csv
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13_1.ximg exists
[Sat Sep 24 17:25:11 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13.csv
[Sat Sep 24 17:25:11 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07022_pi14-548_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src13.ximg exists
[Sat Sep 24 17:25:11 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Sep 24 17:25:11 2011] Fit fullrun_ccd3_acisf07022_pi14-548_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Sep 24 17:25:28 2011] Spatial fit model total counts = 23.415600, observed total counts = 23.000000
[Sat Sep 24 17:25:28 2011] Offset between fit and detection position for source 7 = 0.847341 pixels
[Sat Sep 24 17:25:28 2011] 23.553810 total counts/ 4.512510 bgd. counts: snr = 8.963704
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.847341 pixels
  Position = (479.5, 248.6) = 14 51 45.92 58 10 7.1
  Extent = 0.5 (0.3-0.7)", rotation angle = 0
  Source counts = 19.0 +/- 4.9
  Background counts = 4.5
  Rate = 0.0004 +/- 0.0001
[Sat Sep 24 17:25:28 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 17:25:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 17:25:28 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 17:25:28 2011] Source does appear to be extended
[Sat Sep 24 17:25:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:26:01 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep 24 17:26:01 2011] Initial guess for spatial extent in simple fitting = 0.45"
[Sat Sep 24 17:26:01 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.120
[Sat Sep 24 17:26:01 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 0.45"
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13.ximg exists
[Sat Sep 24 17:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13.csv
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13_1.ximg exists
[Sat Sep 24 17:26:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13.csv
[Sat Sep 24 17:26:02 2011] It looks like the fit did not converge
You should probably delete fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_ccd3_acisf07022_pi14-548_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src13.ximg exists
[Sat Sep 24 17:26:02 2011] fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Sep 24 17:26:02 2011] Fit fullrun_ccd3_acisf07022_pi14-548_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Sep 24 17:26:22 2011] Spatial fit model total counts = 23.104300, observed total counts = 23.000000
[Sat Sep 24 17:26:22 2011] Offset between fit and detection position for source 7 = 0.007998 pixels
[Sat Sep 24 17:26:22 2011] 23.236810 total counts/ 4.324410 bgd. counts: snr = 9.094592
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.007998 pixels
  Position = (479.5, 248.6) = 14 51 45.92 58 10 7.1
  Extent = 0.4 (0.3-0.7)", rotation angle = 0
  Source counts = 18.9 +/- 4.8
  Background counts = 4.3
  Rate = 0.0004 +/- 0.0001
[Sat Sep 24 17:26:22 2011] Vigneting correction estimate = 1.000000
[Sat Sep 24 17:26:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep 24 17:26:22 2011] Assessing source extent using major axis lower bound
[Sat Sep 24 17:26:22 2011] Source does appear to be extended
[Sat Sep 24 17:26:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep 24 17:29:41 2011] Not overwriting source region fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.reg
[Sat Sep 24 17:29:41 2011] Extracting stamp from image fullrun_ccd3_acisf07022_pi14-548_cl_sm2.00.img.gz, (459, 228) - (500, 269)
[Sat Sep 24 17:29:41 2011] Writing fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7.gif
[Sat Sep 24 17:30:21 2011] ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.evt and ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_bgd.evt exist, delete to re-create
[Sat Sep 24 17:30:21 2011] Size of ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.evt.gz[events] = 21 counts
[Sat Sep 24 17:30:21 2011] Mean chipx,y = (769.86, 963.38)
[Sat Sep 24 17:30:21 2011] Mean tdetx,y = (4168.62, 3830.86)
[Sat Sep 24 17:30:21 2011] chipx,y range = (747.00-784.00, 947.00-981.00)
[Sat Sep 24 17:30:21 2011] Size of ../../acisf07022/products/events/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_bgd.evt.gz[events] = 6 counts
[Sat Sep 24 17:30:21 2011] ../../acisf07022/products/images/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.img and ../../acisf07022/products/images/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_bgd.img exist, delete to re-create
[Sat Sep 24 17:30:21 2011] ../../acisf07022/products/spectra/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.pi and ../../acisf07022/products/spectra/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_bgd.pi exist, delete to re-create
[Sat Sep 24 17:30:21 2011] Not generating rmf since there are only 18 counts
[Sat Sep 24 17:30:24 2011] ../../acisf07022/products/lightcurves/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.lc and ../../acisf07022/products/lightcurves/fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_bgd.lc exist, delete to re-create
[Sat Sep 24 17:31:07 2011] 199.756
[Sat Sep 24 17:31:24 2011] Updating aperture counts using extracted products
[Sat Sep 24 17:31:24 2011] Error reading totcts from fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7_src.pi.gz
[Sat Sep 24 17:31:25 2011] Calculating source flux in energy range 0.30-8.00
[Sat Sep 24 17:31:25 2011] Using photon index=1.80, rate=0.000383, arf fullrun_ccd3_acisf07022_pi14-548_pass1_cl_src7.arf
[Sat Sep 24 17:31:25 2011] Assuming count rate is from the 0.20-8.00 bandpass
[Sat Sep 24 17:31:25 2011] Updating source flux to 4.4e-15
[Sat Sep 24 17:31:43 2011] Source 7 has fewer than 100.000000 counts, skipping spectral fitting